From: Kern S. <ke...@si...> - 2005-07-27 12:56:51
|
Hello Arno, Did you convert to using the new Autochanger resource? If you didn't change your SD configuration, it isn't going to work. I made a note of that in the manual, but probably should have added a bigger note in the ReleaseNotes. If that is not the problem, please send me your SD file and I'll look at it. On Tuesday 26 July 2005 22:58, Arno Lehmann wrote: > Hi, > > I just upgraded to 1.37.30 and it seems I'm stuck: > > No tapes in the autochangers. No barcodes. So, usually I use the update > slots scan command to inform bacula of changed volumes. > > But now: > > *status storage=HPDAT > > Connecting to Storage daemon HPDAT at goblin:9103 > > > > goblin-sd Version: 1.37.30 (14 July 2005) i586-pc-linux-gnu suse 8.1 > > Daemon started 26-Jul-05 19:14, 0 Jobs run since started. > > > > Running Jobs: > > No Jobs running. > > ==== > > No Terminated Jobs. > > > > Device status: > > Autochanger "HP DAT" with devices: > > "HP DAT 0" (/dev/nst1) > > Autochanger "FastStor 4000" with devices: > > "Quantum DLT 0" (/dev/nst2) > > Archive "GoblinFile" is not open or does not exist. > > Device "Wangtek 6525" (/dev/nst0) is mounted with Volume "QIC-525-0014" > > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > > Positioned at File=0 Block=0 > > Archive "HP DAT 0" is not open or does not exist. > > Device "Quantum DLT 0" (/dev/nst2) open but no Bacula volume is mounted. > > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > > Positioned at File=0 Block=0 > > ==== > > > > Volume status: > > QIC-525-0014 > > *update slots=2 scan storage=HPDAT > > Connecting to Storage daemon HPDAT at goblin:9103 ... > > 3306 Issuing autochanger "slots" command. > > Device "HP DAT" has 6 slots. > > Connecting to Storage daemon HPDAT at goblin:9103 ... > > 3301 Issuing autochanger "loaded drive 0" command. > > 3302 Autochanger "loaded drive 0", result: nothing loaded. > > 3306 Issuing autochanger "list" command. > > *ver > > goblin-dir Version: 1.37.30 (14 July 2005) > > or, in short, I have to manually update the volume information. Which, > of course, is too unreliable for everyday use... > > I looked in the manual and found no changes in the command definition > for update slots scan. Did I miss something or is this a remaining bug > in a beta version? > > Arno -- Best regards, Kern ("> /\ V_V |