Hi, take a look at the recent updates related BACnet protocol in LabVIEW tools network
BACnet MS/TP Protocol for LabVIEW by Ovak Technologies
The BACnet MS/TP Protocol for LabVIEW is a set of VIs that enable NI equipment to work as slave devices in building control systems.
Implemented based on LabVIEW object-oriented programming, BACnet objects offer the advantages of code reuse, encapsulation, and maintenance. You can use the toolkit on NI real-time hardware targets such as CompactRIO, Single-Board RIO, and PXI. You can also use it on Windows-based computers.
Integrate NI hardware into the BACnet network without OPC servers
Use BACnet system's testing with the benefits of NI technologies
Add specific objects to the system on demand
Runs on both real-time and host targets
Link: http://sine.ni.com/nips/cds/view/p/lang/en/nid/213120
BACnet/IP Protocol for LabVIEW by Ovak Technologies
The BACnet/IP protocol defines a standard way to communicate over a number of wires known as data link/physical layers. It also defines a standard way to communicate using UDP as a virtual link layer.
The BACnet/IP for LabVIEW toolkit is a library that you can use to browse BACnet devices, read and write properties, and perform other tasks specified in the BACnet standard.
No OPC server required
Direct communication with peer devices on their networks
Use of local, remote, and global broadcasts
Communication between BACnet devices and NI hardware/LabVIEW
Dynamic creation of protocol objects
Link: http://sine.ni.com/nips/cds/view/p/lang/en/nid/213749
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
View and moderate all "support-requests Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Support Requests"
Hi, take a look at the recent updates related BACnet protocol in LabVIEW tools network
BACnet MS/TP Protocol for LabVIEW by Ovak Technologies
The BACnet MS/TP Protocol for LabVIEW is a set of VIs that enable NI equipment to work as slave devices in building control systems.
Implemented based on LabVIEW object-oriented programming, BACnet objects offer the advantages of code reuse, encapsulation, and maintenance. You can use the toolkit on NI real-time hardware targets such as CompactRIO, Single-Board RIO, and PXI. You can also use it on Windows-based computers.
Integrate NI hardware into the BACnet network without OPC servers
Use BACnet system's testing with the benefits of NI technologies
Add specific objects to the system on demand
Runs on both real-time and host targets
Link: http://sine.ni.com/nips/cds/view/p/lang/en/nid/213120
BACnet/IP Protocol for LabVIEW by Ovak Technologies
The BACnet/IP protocol defines a standard way to communicate over a number of wires known as data link/physical layers. It also defines a standard way to communicate using UDP as a virtual link layer.
The BACnet/IP for LabVIEW toolkit is a library that you can use to browse BACnet devices, read and write properties, and perform other tasks specified in the BACnet standard.
No OPC server required
Direct communication with peer devices on their networks
Use of local, remote, and global broadcasts
Communication between BACnet devices and NI hardware/LabVIEW
Dynamic creation of protocol objects
Link: http://sine.ni.com/nips/cds/view/p/lang/en/nid/213749