Recent changes to Home

Home modified by Oxy

Oxy — Thu, 30 Aug 2018 10:47:44 -0000

--- v4
+++ v5
@@ -12,3 +12,5 @@
 [motion5 Usage and Error Codes]

 [[download_button]]
+
+[Links](http://directory.virtualworlds.de)

Home modified by Oxy

Oxy — Thu, 30 Aug 2018 09:36:58 -0000

--- v3
+++ v4
@@ -9,5 +9,6 @@
 Licensing: motion5 is free software, released under the GPLv3 license.

 [motion5 Configuration]
+[motion5 Usage and Error Codes]

 [[download_button]]

Home modified by Oxy

Oxy — Thu, 30 Aug 2018 08:26:33 -0000

--- v2
+++ v3
@@ -8,4 +8,6 @@

 Licensing: motion5 is free software, released under the GPLv3 license.

+[motion5 Configuration]
+
 [[download_button]]

Home modified by Oxy

Oxy — Thu, 30 Aug 2018 08:22:23 -0000

--- v1
+++ v2
@@ -1,8 +1,11 @@
-Welcome to your wiki!
+motion5 is a no-compromise, high performance, GRLB-based motion control for CNC processing. It runs e.g. on an Arduino with a 328p processor and supports up to five CNC m otion axes.

-This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].
+The controller is written in highly optimized C utilizing every clever feature of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain up to 38 kHz of stable, jitter free control pulses.

-The wiki uses [Markdown](/p/axis5/wiki/markdown_syntax/) syntax.
+It accepts standards-compliant g-code and has been tested with the output of several CAM tools with no problems. Macro functions, variables, and most canned cycles are not supported.

-[[members limit=20]]
+motion5 includes full acceleration management with look ahead. That means the controller will look up to 16 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.
+
+Licensing: motion5 is free software, released under the GPLv3 license.
+
 [[download_button]]

Home modified by Oxy

Oxy — Thu, 30 Aug 2018 08:19:54 -0000

Welcome to your wiki!

This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].

The wiki uses Markdown syntax.

Project Members:

Oxy (admin)