my AVR plugin gives me an empty list of MCUs under Preferences > AVR > Target Hardware > MCU Type. From where does it take this list? Loading it from the MCU didn't work, either (although avrdude was successful:
Launching C:\cygwin\usr\local\avr\bin\avrdude -cavrisp2 -Pusb -pm16 "-CC:\cygwin\usr\local\avr\bin\avrdude.conf"
Output:
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9781
avrdude: Expected signature for ATMEGA16 is 1E 94 03
Double check chip, or use -F to override this check.
avrdude done. Thank you.
The AVR Supported MCUs view is acting weird as well:
- the second table coloums's header is "avr-gcc?.?"
- there are red 'x's only in this column. The other coloums look Ok.
My envorinment:
- Windows 7x64
- Eclipse Juno
- AVG-GCC and friends compiled under Cygwin (works fine on the command line)
Any help would be greatly appreciated.
Joerg
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all,
my AVR plugin gives me an empty list of MCUs under Preferences > AVR > Target Hardware > MCU Type. From where does it take this list? Loading it from the MCU didn't work, either (although avrdude was successful:
Launching C:\cygwin\usr\local\avr\bin\avrdude -cavrisp2 -Pusb -pm16 "-CC:\cygwin\usr\local\avr\bin\avrdude.conf" Output: avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e9781 avrdude: Expected signature for ATMEGA16 is 1E 94 03 Double check chip, or use -F to override this check. avrdude done. Thank you.The AVR Supported MCUs view is acting weird as well:
- the second table coloums's header is "avr-gcc?.?"
- there are red 'x's only in this column. The other coloums look Ok.
My envorinment:
- Windows 7x64
- Eclipse Juno
- AVG-GCC and friends compiled under Cygwin (works fine on the command line)
Any help would be greatly appreciated.
Joerg
Any luck with this?
I'me getting the same problem with either Juno and Indigo versions.
had the same trouble, installing avr elipse beta solved my problem (beta server):
http://www.ijzerbout.nl/avr-eclipse/updatesite