Re: [Autopilot] Will Flyer on PC be working?
Status: Alpha
Brought to you by:
tramm
From: Fernando A. <fer...@gm...> - 2004-11-19 08:04:49
|
those processors are PocketPC ones. you are compiling for a handheld device. you should modify the code to adapt it into PC code. Try removeing the processos type and compiling under GCC (not avr-gcc). regards On Thu, 18 Nov 2004 22:14:41 -0800 (PST), dong Lee <don...@ya...> wrote: > > I am testing IMU board with Flyer on PC, Madrake 10. > > My IMU board (6DOF release 2.4) works fine both in manual mode, and with > serial commands from Hyperterminal. However, it does not work with Flyer. > I checked PC side. It received adc signal from IMU, but did not send 4 byte > servo commands. Flyer only sends meaningless hex codes... > > The followings are my questions. > > 1) Flyer was compiled with original condition, as it comes with release 2.5, > and > is running on PC with Mandrake Linux 10. > > In Makefile.common, I found it was compiled for strongarm1100 > ARCH = \ > -march=armv4 \ > -mtune=strongarm1100 \ > -DNO_FPU \ > > Will Fyler, compiled by this condition, be running on PC without any > problem? > > 2) If above makes problems, I will buy iPAQ or Waysmall computer which has > Intel Xscale PXA 400 mhz. > For this CPU, do I need to modify Makefile.common ? > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com -- Atentamente, Fernando Luis Angulo Rodrigo (fer...@gm...) |