From: Gonzalo I. <gon...@ho...> - 2022-12-30 22:54:35
|
Hi, So far so good, everything ok and sound quality from/to analog lines is ok: ||||| | A | Release: astlinux-1.5-5689-b4e39c - Asterisk 18.15.1 | s | Host Name: | t | Last Boot: 2022-12-30 21:26 | L | Linux: 5.10.158-astlinux x86_64 | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz | n | RAM: 1982 MB | u | Board Type: genx86_64 | x | Hardware: Generic x86_64 ||||| [ 16.650210] dahdi: loading out-of-tree module taints kernel. [ 16.652463] dahdi: Version: 3.2.0 [ 16.653220] dahdi: Telephony Interface Registered on major 196 [ 16.679708] No freshmaker chip [ 17.400332] Module 0: Installed -- AUTO FXO (SPAIN mode) [ 17.888371] Module 1: Installed -- AUTO FXS/DPO [ 18.389722] Module 2: Installed -- AUTO FXS/DPO [ 18.390139] Module 3: Not installed [ 18.392192] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) [ 18.441892] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' [ 38.318682] ioctl: Start OnHookTrans, card 1 [ 38.959017] ioctl: Start OnHookTrans, card 2 # lsdahdi ### Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) 1 FXO FXSKS (In use) (EC: OSLEC - INACTIVE) 2 FXS FXOKS (In use) (EC: OSLEC - INACTIVE) 3 FXS FXOKS (In use) (EC: OSLEC - INACTIVE) 4 unknown Reserved # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC Fra Codi Options LBO Wildcard TDM400P REV I Board 5 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1) Thanks again and a happy new year to everybody. Regards. ________________________________ De: Ionel Chila <ion...@ma...> Enviado: viernes, 30 de diciembre de 2022 21:10 Para: Lonnie Abelbeck <li...@lo...> Cc: AstLinux Users Mailing List <ast...@li...>; Gonzalo Ibáñez <gon...@ho...> Asunto: Re: DAHDI cards and AstLinux 1.5.x testing Lonnie, First of all Merry Christmas and Happy New Year. As always you’re being awesome and thanks for thinking of us through this upgrade process as well thanks for working so hard through your holidays. I can confirm that everything works perfect after this upgrade Sir. Should I stay on this version or reverse back and wait for the official release? THANKS again Sir [cid:820...@EU...] [cid:b00...@EU...] [cid:e12...@EU...] > On Dec 30, 2022, at 1:18 PM, Lonnie Abelbeck <li...@lo...> wrote: > > Hi ... specially Ionel and Gonzalo (or others) for DAHDI testing. > > You previously tested the AstLinux 1.4.x series with DAHDI 3.1.0, at that time we patched dahdi-linux to include PCI card support for: wctdm24xxp, wctdm and wcfxo > > Gonzalo indicated it worked: > -- >> ||||| >> | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 >> | s | Host Name: >> | t | Last Boot: 2020-08-30 12:38 >> | L | Linux: 4.19.140-astlinux x86_64 >> | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz >> | n | RAM: 1983 MB >> | u | Board Type: genx86_64 >> | x | Hardware: Generic x86_64 >> ||||| >> >> >> [ 24.405610] dahdi: Version: 3.1.0 >> [ 24.409381] dahdi: Telephony Interface Registered on major 196 >> [ 24.435136] No freshmaker chip >> [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) >> [ 25.635354] Module 1: Installed -- AUTO FXS/DPO >> [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after 34 ms >> [ 25.719490] ProSLIC module 2 failed leakage test. Check for short circuit >> [ 26.126341] Module 2: Installed -- AUTO FXS/DPO >> [ 26.126752] Module 3: Not installed >> [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) >> [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' >> [ 44.144753] ioctl: Start OnHookTrans, card 1 >> [ 45.064225] ioctl: Start OnHookTrans, card 2 > -- > > > It is more than 2 years later and the AstLinux Team is working on the AstLinux 1.5.x series with DAHDI 3.2.0 and Linux Kernel 5.10.y, we have included the same patches to maintain PCI card support for: wctdm24xxp, wctdm and wcfxo > > While the Linux Kernel 5.10.y drivers build properly, we have no way to test if things still work using those cards. > > > It now needs testing ... there is a new Pre-Release Version: astlinux-1.5-5689-b4e39c > > Info: > https://www.astlinux-project.org/dev.html > > With the console, use the CLI to upgrade via the appropriate Pre-Release Repository URL for your Asterisk version. > > If you want to, revert back to your previous image with "upgrade-run-image revert" and "kernel-reboot" CLI commands. > > In theory, it should just work. > > Please post your test results here. > > Thanks! > > Lonnie > |