Re: [Astlinux-users] AstLinux in Qemu and mISDN

[Jonathan S. <jse...@ac...>]

Hi Ingmar,

I used the Qemu for my first tests, it is easier to boot, modify the 
livecd content as needed and re-boot. And no, it does not see the PCI 
devices, I burnt the iso to try with my pci card ;)

So I got the issue with the drivers within qemu and the misdn within my 
physical computer.

I am using the latest livecd from sourceforge 0.4.5 . The keydisk works 
just fine but I did not find any misdn-init.conf on my keydisk, I 
modified the one in /etc/misdn-init.conf (which is a symlink to a file 
in /tmp/misdn-init.conf) but after a reboot it does not keep any changes.

Here is where I am : If you look in the file /etc/init.d/asterisk line 
86, you have this :

echo "Starting mISDN"
/etc/init.d/misdn-init config
/etc/init.d/misdn-init start

the config target for the misdn-init script rebuild the file 
/etc/misdn-init.conf, which is done for every reboot.
I may be missing something ?

Jonathan.

Ingmar Schraub a écrit :
> Hello Jonathan,
>
> I am not familiar with qemu, but does it grant you full access to PCI
> devices? I think, in VMware this is not possible.
>
> What version of Astlinux are you running? This information also helps
> others here to provide feedback.
>
> Did you create already the USB keydisk? The mISDN config
> file is stored on the keydisk - if the keydisk exists.
>
> regards,
>
> Ingmar
>
> Jonathan SEMCZYK wrote:
>   
>> Hi,
>>
>> I already built an Asterisk box with an Ubuntu Linux and now I am trying 
>> to use AstLinux instead. I like very much the idea of using a livecd and 
>> a usbkey to save the configuration.
>>
>> Any of you were able to use the AstLinux LiveCD in a Qemu VM ? I cannot 
>> load the ne2k-pci driver at startup, I had to modifiy the /etc/rc script 
>> to enable the use of the AUTOMODS var. The AUTOMODS var is not read if 
>> the file /etc/rc.modules exists (which does in the livecd).
>>
>> I will also be unable to use my HFC-PCI card in TE mode as the 
>> configuration file is re-generated at startup.
>>
>> How do you use AstLinux ? Do you build your own with the build 
>> environment or use an already built LibeCD ?
>>
>> Thanks,
>> Jonathan.
>>
>>
>>
>>
>>
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Astlinux-users mailing list
>> Ast...@li...
>> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>>
>> Donations to support AstLinux are graciously accepted via PayPal to pa...@kr....
>>     
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Astlinux-users mailing list
> Ast...@li...
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to pa...@kr....
>   

-- 



	

*Jonathan SEMCZYK
* jse...@ac... <mailto:jse...@ac...>
Tel: (0)3 20 28 61 65
Fax: (0)3 20 70 57 11

Acipia
50 av. Jean Lebas
59100 Roubaix

Visitez notre site Web
http://www.acipia.fr <http://www.acipia.fr/>