From: Darrick H. <dha...@dj...> - 2007-05-08 03:07:15
|
Kristian Kielhofner wrote: > On 5/7/07, Darrick Hartman <dha...@dj...> wrote: > >> There have been some issues with PPPoe, that I hope to get corrected. I >> need to better determine the problem and may need some assistance from >> users to get there. >> >> First, does anyone have a working PPPoE installation using Astlinux? If >> so, what did you need to modify to get it working? >> >> Defining EXTIF as ppp0 and setting the variables PPPOEUSER, PPPOEPASS >> and PPPOEIF should result in a configuration file being generated in >> /tmp/etc/ppp but nothing is generated. >> >> Let's get this corrected! >> >> Darrick >> >> > > Darrick, > > I use PPP quite a bit. Here is a box: > > grep -i ppp /etc/rc.conf: > EXTIF=ppp0 > PPPOEKERNEL="YES" > PPPOEUSER="fakeuser" > PPPOEPASS="fakepass" > PPPOEIF=eth0 > Kristian, Do you have "WANDELAY" set to anything? Perhaps that's what I'm missing. Thanks, Darrick > pbx ~ # cat /tmp/etc/ppp/pppoe.conf > ETH=eth0 > USER=fakeuser > DEMAND=no > DNSTYPE=SERVER > PEERDNS=yes > DNS1= > DEFAULTROUTE=yes > CONNECT_TIMEOUT=30 > CONNECT_POLL=2 > ACNAME= > SERVICENAME= > PING=. > CONFIG=/etc/ppp > CF_BASE=pppoe.conf > PIDFILE=/var/run/pppoe.conf-adsl.pid > SYNCHRONOUS=no > CLAMPMSS=1412 > LCP_INTERVAL=20 > LCP_FAILURE=3 > PPPOE_TIMEOUT=160 > FIREWALL=NONE > PPPOE_EXTRA= > PPPD_EXTRA= > LINUX_PLUGIN=/usr/lib/ppp/rp-pppoe.so > > pbx ~ # cat /tmp/etc/ppp/pap-secrets > fakeuser * fakepass > > pbx ~ # ifconfig ppp0 > ppp0 Link encap:Point-to-Point Protocol > inet addr:X.X.X.X P-t-P:X.X.X.X Mask:255.255.255.255 > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 > RX packets:34252005 errors:0 dropped:0 overruns:0 frame:0 > TX packets:23859058 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:3 > RX bytes:3130688181 (2.9 GiB) TX bytes:2504443931 (2.3 GiB) > > > Been up for quite some time... > > -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com |