Re: [Astlinux-users] How do I edit a permanent misdn-init.conf?

[Peter R. <pe...@ne...>]

Ingmar, Darrick, Alexander,

I can confirm that HFC-PCI works great also in "te_ptp" mode

unfortunately I could not use soekris/astlinux because it was impossible to
change it in this mode permanently via rc.conf

I have to do a basic asterisk installation on another pc.

I hope this problem will solved in the next release because astlinux is to
good and practical especially in combination with the soekris.

Kind regards,

Peter Roelandts


----- Original Message ----- 
From: "Ingmar Schraub" <is...@es...>
To: <at...@oc...>
Cc: <ast...@li...>
Sent: Tuesday, February 06, 2007 10:11 AM
Subject: Re: [Astlinux-users] How do I edit a permanent misdn-init.conf?


> Dear Alexander,
>
> depending on your ISDN card, mISDN can only create a default template
> for your configuration, when you the misdn-init script is executed.
>
> I.e. if you run one of the cheap HFC-PCI cards (about 30 Euros), this
> happens. If you have a Beronet 2,4,8 port card, you can at least specify
> nt oder te mode by setting a hardware jumper.
>
> In typical environments (te_ptmp) is is fine. That's why we made life
> easy for the majority of users.
>
> In your case do the following:
>
> mount -t ext2 -o rw,remount /
> vi /etc/init.d/asterisk
>   search for 'misdn-init config' and comment this line out
> mount -t ext2 -o ro,remount /
>
> Now misdn-init config is not executed when asterisk starts and your
> edited misdn-init.conf file remains untouched.
>
> Note: this assumes you start your mISDN with ISDN_MODPROBE="MISDN" in
> rc.conf.
>
> If you have further questions, please write to
> ast...@li.... Darrick already explained why.
>
> Hope this helps,
>
> Ingmar
>
> Alexander Topolanek wrote:
> > Hi,
> >
> > sorry to ask that, but my hair's getting grey...
> >
> > I'd like to change to te_ptp=1 in misd-init.conf, but this file in the
> > running system is created a new at boot. How do I find the original file
> > and edit it?
> >
> > thanks
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Astlinux-users mailing list
> Ast...@li...
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
pa...@kr....
>