Re: [Astlinux-users] channel mISDN issues #2??

[Peter R. <pe...@ne...>]

Ingmar,

Hehe just crossed my previous post,

Ingmar I am not needed the "nt" but "et" with  "ptp" mode so it must be
"te_ptp"

It is possible to use "et" on "ptp" ?? not sure about that :-o have to read
my isdn books again

I'm using astlinux 4.4.0

ps there are no jumpers on the hfc-pci card to forced using "et" or "nt"

Kind regards,

Peter R.


----- Original Message ----- 
From: "IS" <is...@es...>
To: "AstLinux Users Mailing List" <ast...@li...>
Cc: <ast...@li...>
Sent: Sunday, February 04, 2007 2:35 PM
Subject: Re: [Astlinux-users] channel mISDN issues #2??


> In addition to my previous e-mail:
>
> if you can get your HFC card switched to nt mode with your current
> astlinux image (btw, you did not say which version you are running or if
> you used the dev environment to compile your own version...), then it's
> only a matter of adjusting a few config/startup files. That should not be
> too difficult. I already gave you the pointer in my previous e-mail, where
> you have to look.
>
> I have seen some time ago, that you could set the card to nt mode in
> misdn, but misdnportinfo always showed ptmp mode. That was a limitation of
> the misdn version used a while ago.
>
> If you provide more information, we can work on it.
>
> cheers, Ingmar
>
> quoting Peter Roelandts
> > Hello all
> >
> > Yesterday I was at a customer try to install a soekris with an hfc-pci
> > card installed
> > always connect BRI pmp but there it was BRI ptp so a change in rc.conf
> >
> > ISDN_MODPROBE="hfcpci protocol=0x2 layermask=0xf"
> >
> >
> > TO
> >
> > ISDN_MODPROBE="hfcpci protocol=0x22 layermask=0xf"
> >
> > Then a reboot, and I look in misdn-init.conf unfortunately there is
still
> > the value te_ptmp=1 instead of te_ptp=1
> >
> > Edit the misdn-init.conf to change it manually is out of the question
> > because it is writing during the boot process
> >
> > any suggestions hints?
> >
> > Kind Regards,
> >
> > Peter
> >
Roelandts-------------------------------------------------------------------
------
> > Using Tomcat but need to do more? Need to support web services,
security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> >
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642_______________________________________________
> > Astlinux-users mailing list
> > Ast...@li...
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> > pa...@kr....
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Astlinux-users mailing list
> Ast...@li...
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
pa...@kr....
>