Menu
▾
▴
Re: [Astlinux-users] Can't edit rc.conf
|
From: olivier.taylor <oli...@gm...> - 2007-01-04 17:00:09
|
mine did use exactly the same syntax as yours :) A copy paste... If mine wasn't polite, what about your? Html mails are quite usuals right now, as well as internet, voip and so=20 on, even thunderbird is able to do that... Back to the stone age? Anyway, it wasn't an help request but an answer to an help request. Kind regards, ps: Just for you, this email is Text/Html compliant :) Carla Schroder a =C3=A9crit : > It was a polite request, and it's standard list etiquette to use plain = text.=20 > Since you can't handle that, I can't be bothered to read your messages = or try=20 > to help. Not that I know enough to be helpful all that much, but I do t= ry. > > Carla > > On Thursday 04 January 2007 08:24, olivier.taylor wrote: > =20 >> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> >> <head> >> <meta content=3D"text/html;charset=3DUTF-8" http-equiv=3D"Content-Ty= pe"> >> </head> >> <body bgcolor=3D"#ffffff" text=3D"#000000"> >> <pre wrap=3D"">TXT mails are real PITAs- any chance you could use html= ?</pre> >> <br> >> <br> >> Carla Schroder a =C3=A9crit : >> <blockquote cite=3D"mid...@br..." type=3D"= cite"> >> <pre wrap=3D"">HTML mails are real PITAs- any chance you could use p= lain >> text? >> >> thanks, >> Carla >> >> On Wednesday 03 January 2007 23:28, olivier.taylor wrote: >> </pre> >> <blockquote type=3D"cite"> >> <pre wrap=3D""> Hi Phil, >> >> Seems to be the same problem, >> >> Docs doesn't tell you to modify grub.conf but you have to. >> >> Genkd, If I understand well, creates the directories in Mnt/kd, Rc.co= nf is >> in /etc and there are some symlinks to /mnt/kd >> >> in Grub.conf, you should have : >> >> default saved >> timeout 3 >> serial --unit=3D0 --speed=3D19200 --word=3D8 --parity=3Dno --stop=3D1 >> terminal serial >> >> >> title AstLinux (Boot from CF - Use third partition for KeyDisk) >> root (hd0,0) >> kernel /boot/bzImage root=3D/dev/hda1 console=3DttyS0,19200n8 >> astlinux=3Dnet4801 astkd=3D/dev/sda1 ide=3Dnodma -------> Flash k= eydisk >> savedefault >> >> Remember to make the system read/write before modifying grub.conf >> >> >> Olivier >> >> >> Phil McKerracher a =C3=A9crit : >> It seems I lied when I said I could edit changes to rc.conf on a USB f= lash >> stick. I thought I had successfully done this but I just tried again >> without success. >> >> I tried reformatting the drive from scratch (using genkd and then rebo= oting >> as described on >> <a class=3D"moz-txt-link-freetext" >> href=3D"http://www.voip-info.org/wiki/index.php?page=3DAstLinux%20User= s%20Guide >> %20Cha">http://www.voip-info.org/wiki/index.php?page=3DAstLinux%20User= s%20Guid >> e%20Cha</a> pter%202 and on >> <a class=3D"moz-txt-link-freetext" >> href=3D"http://www.voipplanet.com/backgrounders/article.php/3646976">h= ttp://w >> ww.voipplanet.com/backgrounders/article.php/3646976</a>). >> >> If I go to /mnt/kd using the web interface I see the error message >> >> Warning: is_dir(): Stat failed for /mnt/kd/asterisk (errno=3D40 - Too = many >> levels of symbolic links) in /stat/var/www/admin/dirphp_class.php on l= ine >> 115 >> >> ...and I can't find rc.conf anywhere (is it supposed to be in the root= or >> in /etc?). >> >> This is what I see in the root of the keydisk: >> astdb crontabs lost+found ssh >> asterisk dnsmasq.leases monitor tftpboot >> cdr-csv home voicemail >> >> If I edit rc.conf in /etc using the web interface (e.g. to uncomment I= NTIF) >> the changes don't persist past a reboot. (Yes, I did remember to make = the >> filesystem read/write first, then save changes and reboot.) I tried wi= th >> and without doing a "reload". I tried with and without the keydisk mou= nted. >> I tried using nano from the terminal instead of the web interface. I t= ried >> power cycling instead of rebooting. I tried reformatting the flash dri= ve >> and the CF card. I searched the mailing list archive for a previous me= ntion >> of this without success. >> >> Every reboot takes a few mins, so this has all taken hours. Please tel= l me >> it gets easier than this eventually! I'm trying not to bother you all = with >> dumb questions (after the flaming I got from my initial ones!) but it = would >> really be much easier if there was some documentation around somewhere. >> >> I'm off to try an earlier version of asterisk because I'm sure I had t= his >> working at one stage and I was using a different version initially. >> </pre> >> </blockquote> >> <pre wrap=3D""><!----> >> </pre> >> </blockquote> >> </body> >> =20 > > =20 |
