Menu
▾
▴
Re: [Astlinux-devel] Segfault Crash on astlinux-1.3-4232-509fbe
|
From: Josh A. <jm...@ho...> - 2019-06-19 13:48:05
|
Lonnie, I'm running an HP t5740 thinclient (with a 32-bit CPU) with a Digium TE122P card (firmware 1.12). I never knew about the asterisk -c command. That's very helpful. Thanks! Unfortunately, I'm not getting too far: pbx ~ # asterisk -c Asterisk 16.4.0, Copyright (C) 1999 - 2018, Digium, Inc. and others. Created by Mark Spencer <mar...@di...> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= XSLT support not found. XML documentation may be incomplete. PBX UUID: 79ef0c49-1727-4912-907a-a3954cb63520 [Jun 19 09:33:31] NOTICE[1642]: loader.c:2377 load_modules: 323 modules will be loaded. Segmentation fault I have a custom module that I suspect could be causing issues. That's really of no concern here - I'll just disable it if that prevents a roadblock to upgrade. When I throw a noload for it into modules.conf, I get all the way: pbx ~ # asterisk -c Asterisk 16.4.0, Copyright (C) 1999 - 2018, Digium, Inc. and others. Created by Mark Spencer <mar...@di...> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= XSLT support not found. XML documentation may be incomplete. PBX UUID: 79ef0c49-1727-4912-907a-a3954cb63520 [Jun 19 09:39:43] NOTICE[2020]: loader.c:2377 load_modules: 322 modules will be loaded. [ Initializing Custom Configuration Options ] [Jun 19 09:39:47] WARNING[2020]: res_odbc.c:606 load_odbc_config: The 'pooling', 'shared_connections', 'limit', and 'idlecheck' options were replaced by 'max_connections'. See res_odbc.conf.sample. [Jun 19 09:39:47] WARNING[2020]: res_odbc.c:606 load_odbc_config: The 'pooling', 'shared_connections', 'limit', and 'idlecheck' options were replaced by 'max_connections'. See res_odbc.conf.sample. [Jun 19 09:39:47] WARNING[2020]: features_config.c:1533 unsupported_handler: Parkinglots are no longer configurable in features.conf; parking is now handled by res_parking.conf [Jun 19 09:39:47] WARNING[2020]: features_config.c:1537 unsupported_handler: The option 'parkext' is no longer configurable in features.conf. [Jun 19 09:39:47] WARNING[2020]: features_config.c:1537 unsupported_handler: The option 'parkpos' is no longer configurable in features.conf. [Jun 19 09:39:47] WARNING[2020]: features_config.c:1537 unsupported_handler: The option 'context' is no longer configurable in features.conf. [Jun 19 09:39:47] NOTICE[2020]: dnsmgr.c:493 do_reload: Managed DNS entries will be refreshed every 300 seconds. [Jun 19 09:39:47] ERROR[2020]: cel.c:428 ast_cel_str_to_event_type: Unknown event name 'BRIDGE_START' [Jun 19 09:39:47] ERROR[2020]: config_options.c:798 aco_process_var: Error parsing events=APP_START,CHAN_START,CHAN_END,ANSWER,HANGUP,BRIDGE_START,BRIDGE_END at line 76 of [Jun 19 09:39:47] ERROR[2020]: config_options.c:544 process_category: In cel.conf: Processing options for general failed [Jun 19 09:39:47] NOTICE[2020]: cel.c:1614 load_module: Failed to process CEL configuration; using defaults [Jun 19 09:39:47] NOTICE[2020]: cdr.c:4508 cdr_toggle_runtime_options: CDR simple logging enabled. [Jun 19 09:39:48] ERROR[2020]: res_resolver_unbound.c:417 unbound_config_preapply: Failed to set hosts file to 'system' in unbound resolver: syntax error [Jun 19 09:39:48] NOTICE[2020]: res_smdi.c:1424 load_module: No SMDI interfaces are available to listen on, not starting SMDI listener. [Jun 19 09:39:48] WARNING[2020]: res_phoneprov.c:1230 get_defaults: Unable to find a valid server address or name. SIP channel loading... [Jun 19 09:39:48] NOTICE[2020]: chan_sip.c:31843 build_peer: The 'username' field for sip peers has been deprecated in favor of the term 'defaultuser' [Jun 19 09:39:48] ERROR[2020]: chan_motif.c:2681 custom_connection_handler: Connection 'local-jabber-account' configured on endpoint 'jingle-endpoint' could not be found [Jun 19 09:39:48] ERROR[2020]: config_options.c:798 aco_process_var: Error parsing connection=local-jabber-account at line 81 of [Jun 19 09:39:48] ERROR[2020]: config_options.c:572 process_category: In motif.conf: Processing options for jingle-endpoint failed [Jun 19 09:39:48] ERROR[2020]: chan_motif.c:2756 load_module: Unable to read config file motif.conf. Module loaded but not running. [Jun 19 09:39:48] NOTICE[2072]: chan_sip.c:24881 handle_response_peerpoke: Peer 'joshcisco' is now Reachable. (12ms / 6000ms) [Jun 19 09:39:49] ERROR[2020]: ari/config.c:312 process_config: No configured users for ARI [Jun 19 09:39:49] NOTICE[2020]: confbridge/conf_config_parser.c:2326 verify_default_profiles: Adding default_menu menu to app_confbridge [Jun 19 09:39:49] ERROR[2020]: config_options.c:528 process_category: Could not find config type for category 'agents' in 'agents.conf' [Jun 19 09:39:49] ERROR[2020]: app_agent_pool.c:2693 load_module: Unable to load config. Not loading module. [Jun 19 09:39:49] NOTICE[2020]: cel_custom.c:95 load_config: No mappings found in cel_custom.conf. Not logging CEL to custom CSVs. [Jun 19 09:39:49] ERROR[2020]: codec_dahdi.c:813 find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory [Jun 19 09:39:49] WARNING[2020]: app_voicemail.c:14216 actual_load_config: maxsilence should be less than minsecs or you may get empty messages [Jun 19 09:39:49] WARNING[2020]: res_hep_rtcp.c:161 load_module: res_hep is disabled; declining module load [Jun 19 09:39:49] WARNING[2020]: res_hep_pjsip.c:236 load_module: res_hep is disabled; declining module load [Jun 19 09:39:49] WARNING[2020]: loader.c:2381 load_modules: Some non-required modules failed to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: res_resolver_unbound declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: chan_motif declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: res_pjsip_transport_websocket declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: app_agent_pool declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: cel_sqlite3_custom declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: cdr_sqlite3_custom declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: res_hep_rtcp declined to load. [Jun 19 09:39:49] ERROR[2020]: loader.c:2396 load_modules: res_hep_pjsip declined to load. Asterisk Ready. But then as soon as I go off-hook on a Dahdi channel: *CLI> Segmentation fault It's really starting to seem (to me) like this is a Dahdi isssue. I'm able to place calls in and out through chan_sip and chan_pjsip. It's only Dahdi (going off-hook or trying to call a Dahdi channel) that seems to have issues. With ast16, Dahdi is triggering the same jansson error in dmesg: [ 732.177325] asterisk[2437]: segfault at 1 ip b73d2dcd sp b39f38e0 error 4 in libjansson.so.4.11.1[b73ce000+b000] ________________________________ From: Lonnie Abelbeck <li...@lo...> Sent: Wednesday, June 19, 2019 9:22 AM To: AstLinux Developers Mailing List Subject: Re: [Astlinux-devel] Segfault Crash on astlinux-1.3-4232-509fbe Hi Josh, Something is not right here... Testing tips: make sure asterisk is stopped (using CLI) -- service asterisk stop -- Then start via -- asterisk -c -- That will give you more context where the crash is occurring. BTW, what hardware are you using ? Lonnie > On Jun 19, 2019, at 8:15 AM, Josh Alberts <jm...@ho...> wrote: > > I tried the ast16 devel build, and this time, Asterisk is crashing before I get a chance to do anything. From dmesg (I tried restarting it twice): > > [ 44.698144] asterisk[1476]: segfault at 3c00 ip 081ee3f3 sp bfea5a10 error 4 in asterisk[8048000+2d2000] > [ 75.397478] asterisk[1621]: segfault at 3c00 ip 081ee3f3 sp bfae0140 error 4 in asterisk[8048000+2d2000] > [ 83.550674] asterisk[1671]: segfault at 3c00 ip 081ee3f3 sp bfdfff10 error 4 in asterisk[8048000+2d2000] > > > From: Lonnie Abelbeck <li...@lo...> > Sent: Tuesday, June 18, 2019 4:54 PM > To: AstLinux Developers Mailing List > Subject: Re: [Astlinux-devel] Segfault Crash on astlinux-1.3-4232-509fbe > > Hi Josh, > > As a mini-clue "libjansson.so" is only referenced by the "asterisk" binary, not by any of the asterisk modules. > > You might test again but use ast16 ... your Asterisk 13 configs should be fine for a quick test. > > Understand you have a somewhat unique setup using DAHDI, chan_sip and chan_pjsip all at the same time. And on 32-bit hardware. Agreed it should all work though. > > Lonnie > > > > > On Jun 18, 2019, at 3:16 PM, Lonnie Abelbeck <li...@lo...> wrote: > > > > Hi Josh, > > > > If you can, more clues would be great. > > > > Like if it is precisely reproducible, or if the crash varies ... and what is going on in the dialplan. > > > > Lonnie > > > > > > > > > >> On Jun 18, 2019, at 3:10 PM, Josh Alberts <jm...@ho...> wrote: > >> > >> I'm using both PJSIP and chan_sip (on different ports, of course). > >> > >> Come to think of it, all of the test calls that I generated either originated or terminated to/from the same Dahdi channel, so maybe Dahdi is playing into this? Wish I could have tested more but I had to get the system back up. Like I said, I would be glad to upgrade again and investigate further if that would help. > >> > >> From: Michael Keuter <li...@mk...> > >> Sent: Tuesday, June 18, 2019 4:06 PM > >> To: AstLinux Developers Mailing List > >> Subject: Re: [Astlinux-devel] Segfault Crash on astlinux-1.3-4232-509fbe > >> > >> > >>> Am 18.06.2019 um 21:56 schrieb Josh Alberts <jm...@ho...>: > >>> > >>> I tried upgrading from astlinux-1.3.5.2 i686 to astlinux-1.3-4232-509fbe. When Asterisk receives a call, when a Dahdi channel goes off-hook, or basically in response to any other user-generated action, Asterisk immediately crashes and I see this in the dmesg output: > >>> > >>> segfault at 1 ip 40421dcd sp 4334a990 error 4 in libjansson.so.4.11.1[4041d000+b000] > >>> > >>> I reverted back to 1.3.5.2 (Thanks for the Revert to Previous feature!) but I could try the development build again if that would help you guys figure out what's going on. > >>> > >>> Josh > >> > >> So that means: > >> > >> Asterisk 13.24.1 versus Asterisk 13.27.0 > >> > >> Are you using PJSIP already or chan_sip? > >> > >> I have been running that build on a few boxes successfully for a week, although none of my boxes uses DAHDI … > >> Does anyone else on this list is using Asterisk 13.27.0 together with DAHDI? > >> > >> Michael > >> > >> http://www.mksolutions.info > >> > >> > >> > >> > >> > >> _______________________________________________ > >> Astlinux-devel mailing list > >> Ast...@li... > >> https://lists.sourceforge.net/lists/listinfo/astlinux-devel > >> _______________________________________________ > >> Astlinux-devel mailing list > >> Ast...@li... > >> https://lists.sourceforge.net/lists/listinfo/astlinux-devel > > > > > > > > _______________________________________________ > > Astlinux-devel mailing list > > Ast...@li... > > https://lists.sourceforge.net/lists/listinfo/astlinux-devel > > > > _______________________________________________ > Astlinux-devel mailing list > Ast...@li... > https://lists.sourceforge.net/lists/listinfo/astlinux-devel > _______________________________________________ > Astlinux-devel mailing list > Ast...@li... > https://lists.sourceforge.net/lists/listinfo/astlinux-devel _______________________________________________ Astlinux-devel mailing list Ast...@li... https://lists.sourceforge.net/lists/listinfo/astlinux-devel |
