Re: [Astlinux-devel] trouble with build - sha1 checksums don't match

[Bill L. <wr...@gm...>]

Lonnie,

I turned on the checkbox in 'make menuconfig' so I'd have 'make' in the
resulting AstLinux image.

Bill


On 5/25/2019 6:26 PM, Lonnie Abelbeck wrote:
> Bill,
> 
> This does not make sense since you should not need to build "make" just use the native make from your build environment.
> 
> https://doc.astlinux-project.org/devdoc:packages
> 
> Did you do something like...
> 
> $ cp astlinux-ast13.config .config
> 
> This sets up a standard build .config ... with "# BR2_PACKAGE_MAKE is not set"
> 
> Lonnie
> 
>> The Ruby download link is dead, also.
>>
>>    ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p0.tar.gz
>>
> 
> AstLinux never used Ruby, ever.  So there are no mirrored downloads.
> 
> 
> 
> 
> 
>> On May 25, 2019, at 4:57 PM, Bill Lewis <wr...@gm...> wrote:
>>
>> Here's something else odd:
>>
>> It could not pull down   https://s3.amazonaws.com/files.astlinux-project/make-3.81.tar.bz2.sha1:
>> 2019-05-25 17:45:29 ERROR 403: Forbidden.
>>
>> So the build stopped.
>>
>> But immediately restarting the build, it went ahead and unpacked and proceeded to build 'make' without going through the sha1 check at all.
>>
>> Bill
>>
>>
>>
>>>>> make 3.81 Downloading
>> --2019-05-25 17:45:28--  http://ftp.gnu.org/pub/gnu/make/make-3.81.tar.bz2
>> Resolving ftp.gnu.org (ftp.gnu.org)... 209.51.188.20, 2001:470:142:3::b
>> Connecting to ftp.gnu.org (ftp.gnu.org)|209.51.188.20|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 1151445 (1.1M) [application/x-bzip2]
>> Saving to: ‘/home/bill/astlinux/trunk/dl/make-3.81.tar.bz2’
>>
>> /home/bill/astlinux/tru 100%[=================================>]   1.10M  6.37MB/s   in 0.2s
>>
>> 2019-05-25 17:45:28 (6.37 MB/s) - ‘/home/bill/astlinux/trunk/dl/make-3.81.tar.bz2’ saved [1151445/1151445]
>>
>> https://s3.amazonaws.com/files.astlinux-project/make-3.81.tar.bz2.sha1:
>> 2019-05-25 17:45:29 ERROR 403: Forbidden.
>> sha1sum: dl/make-3.81.tar.bz2.sha1: No such file or directory
>> make-3.81.tar.bz2 failed verification - exiting
>> ##
>> ## Maintainer upload command: ./scripts/upload-dl-pair dl/make-3.81.tar.bz2
>> ##
>> package/Makefile.package.in:232: recipe for target '/home/bill/astlinux/trunk/output/build/make-3.81/.stamp_downloaded' failed
>> make: *** [/home/bill/astlinux/trunk/output/build/make-3.81/.stamp_downloaded] Error 1
>>
>> real    0m1.920s
>> user    0m0.548s
>> sys     0m0.716s
>> build: Incomplete build, no AstLinux Release for you.
>>
>> real    0m2.059s
>> user    0m0.568s
>> sys     0m0.752s
>> bill@debian-60GB:~/astlinux/trunk$
>>
>> =====
>>
>> bill@debian-60GB:~/astlinux/trunk$ time ./scripts/build geni586
>> Defining Board = "geni586"
>>
>> ##
>> ## AstLinux Build: Board = "geni586"
>> ##
>>
>> The initrd image (initrd.img) already exists, skipping build.
>> mkdir -p /home/bill/astlinux/trunk/output/build/buildroot-config
>> #
>> # configuration written to /home/bill/astlinux/trunk/.config
>> #
>> /usr/bin/make -j1  HOSTCC="/usr/bin/gcc" HOSTCXX="/usr/bin/g++" silentoldconfig
>> make[1]: Entering directory '/home/bill/astlinux/trunk'
>> KCONFIG_AUTOCONFIG=/home/bill/astlinux/trunk/output/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/bill/astlinux/trunk/output/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/bill/astlinux/trunk/output/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/bill/astlinux/trunk/.config /home/bill/astlinux/trunk/output/build/buildroot-config/conf --silentoldconfig Config.in
>> #
>> # make dependencies written to .auto.deps
>> # ATTENTION buildroot devels!
>> # See top of this file before playing with this auto-preprequisites!
>> #
>> make[1]: Leaving directory '/home/bill/astlinux/trunk'
>>>>> make 3.81 Extracting
>> bzcat /home/bill/astlinux/trunk/dl/make-3.81.tar.bz2 | tar --strip-components=1 -C /home/bill/astlinux/trunk/output/build/make-3.81  -xf -
>>>>> make 3.81 Patching package/make
>> for file in config.guess config.sub; do for i in $(find /home/bill/astlinux/trunk/output/build/make-3.81 -name $file); do cp package/gnuconfig/$file $i; done; done
>>
>>
>>
>>
>>
>