astlinux-users

[Astlinux-users] Astlinux 0.3.0 can i use DTMFMODE=rfc2833 , info or inband i use only the codec ulaw and alaw (G711).

[nedi <ne...@gm...>]

Hi all
I get for my gsm gateway new firmware and the new firmware  have choice 
DTMFMODE=rfc2833, info or inband.
can I use in Astlinux 0.3.0  DTMFMODE=rfc2833, info or inband i use only the 
codec ulaw and alaw (G711).

Before firmware upgrade I used DTMFMODE=rfc2543, now I can't use it.

Thanks. 

Re: [Astlinux-users] Astlinux 0.3.0 can i use DTMFMODE=rfc2833 , info or inband i use only the codec ulaw and alaw (G711).

[Kristian K. <kri...@gm...>]

On 3/1/07, nedi <ne...@gm...> wrote:
> Hi all
> I get for my gsm gateway new firmware and the new firmware  have choice
> DTMFMODE=rfc2833, info or inband.
> can I use in Astlinux 0.3.0  DTMFMODE=rfc2833, info or inband i use only the
> codec ulaw and alaw (G711).
>
> Before firmware upgrade I used DTMFMODE=rfc2543, now I can't use it.
>
> Thanks.
>

Nedi,

  If you are using alaw or ulaw you can use any dtmfmode that is
supported by both (or all) of your endpoints.

  If you are using a compressed codec you can only use info or
rfc2833.  rfc2833 seems to be more popular these days because it
follows the RTP path with the audio, not the signalling as with INFO.
I myself prefer rfc2833.

  RFC 2543 is the old specification for SIP.  The new one is RFC 3261.
 Either way they are not a DTMF mode and are not valid as a dtmfmode
configure option in Asterisk.

-- 
Kristian Kielhofner

[Astlinux-users] Firewall with Traffic Shaper

[Kevin K. <Ast...@gt...>]

Is it possible to use Arno's Firewall with the traffic application in
ASTLinux?  I would like to use the traffic shaping and offer NAT
mapping/forwarding.

Thanks,

Kevin

 

Re: [Astlinux-users] Firewall with Traffic Shaper

[Kristian K. <kri...@gm...>]

On 3/1/07, Kevin Kiely <Ast...@gt...> wrote:
> Is it possible to use Arno's Firewall with the traffic application in
> ASTLinux?  I would like to use the traffic shaping and offer NAT
> mapping/forwarding.
>
> Thanks,
>
> Kevin
>

Kevin,

  From what I know or Arno's Firewall this should be possible.
AstShape operates independently of iptables so you should be fine.

  Darrick you know a bit more about Arno's, what do you think?

-- 
Kristian Kielhofner

Re: [Astlinux-users] Firewall with Traffic Shaper

[Darrick H. <dha...@dj...>]

Kristian Kielhofner wrote:
> On 3/1/07, Kevin Kiely <Ast...@gt...> wrote:
>   
>> Is it possible to use Arno's Firewall with the traffic application in
>> ASTLinux?  I would like to use the traffic shaping and offer NAT
>> mapping/forwarding.
>>     
>   From what I know or Arno's Firewall this should be possible.
> AstShape operates independently of iptables so you should be fine.
>
>   Darrick you know a bit more about Arno's, what do you think?
>   
Yup.  Works like a charm.  Just define EXTUP and EXTDOWN in rc.conf and 
you should be good to go.

Darrick

-- 
Darrick Hartman
DJH Solutions, LLC
http://www.djhsolutions.com