Menu
▾
▴
astlinux-commits
|
From: <abe...@us...> - 2011-12-22 03:36:33
|
Revision: 5326
http://astlinux.svn.sourceforge.net/astlinux/?rev=5326&view=rev
Author: abelbeck
Date: 2011-12-22 03:36:26 +0000 (Thu, 22 Dec 2011)
Log Message:
-----------
libata, use libata.dma=3 to disable CF DMA for runnix and astlinux
Modified Paths:
--------------
branches/1.0/project/astlinux/board/alix/runnix.conf
branches/1.0/project/astlinux/board/geni586/runnix.conf
branches/1.0/project/astlinux/board/geni586-serial/runnix.conf
branches/1.0/project/astlinux/board/net4801/runnix.conf
branches/1.0/project/astlinux/board/net5501/runnix.conf
branches/1.0/project/astlinux/board/net6501/runnix.conf
branches/1.0/project/astlinux/board/via/runnix.conf
branches/1.0/project/astlinux/board/via-serial/runnix.conf
branches/1.0/project/astlinux/board/viac7/runnix.conf
branches/1.0/project/astlinux/board/viac7-serial/runnix.conf
branches/1.0/project/astlinux/board/wrap/runnix.conf
branches/1.0/project/runnix/files/configs/alix.cfg
branches/1.0/project/runnix/files/configs/default-serial.cfg
branches/1.0/project/runnix/files/configs/default.cfg
branches/1.0/project/runnix/files/configs/wrap.cfg
Modified: branches/1.0/project/astlinux/board/alix/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/alix/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/alix/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=alix astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,38400n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=alix astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,38400n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/geni586/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/geni586/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/geni586/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/geni586-serial/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/geni586-serial/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/geni586-serial/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/net4801/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/net4801/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/net4801/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net4801 astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net4801 astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/net5501/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/net5501/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/net5501/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net5501 astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net5501 astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/net6501/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/net6501/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/net6501/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net6501 astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=net6501 astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/via/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/via/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/via/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=via astimg=ASTVER.run astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=via astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/via-serial/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/via-serial/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/via-serial/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=via astimg=ASTVER.run astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=via astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/viac7/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/viac7/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/viac7/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=viac7 astimg=ASTVER.run astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=viac7 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/viac7-serial/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/viac7-serial/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/viac7-serial/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=viac7 astimg=ASTVER.run astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=viac7 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/wrap/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/wrap/runnix.conf 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/astlinux/board/wrap/runnix.conf 2011-12-22 03:36:26 UTC (rev 5326)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=wrap astkd=auto asturw=auto astlive ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 reboot=bios console=ttyS0,38400n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astimg=ASTVER.run astlinux=wrap astkd=auto asturw=auto astlive libata.dma=3 reboot=bios console=ttyS0,38400n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/runnix/files/configs/alix.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/alix.cfg 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/runnix/files/configs/alix.cfg 2011-12-22 03:36:26 UTC (rev 5326)
@@ -7,19 +7,19 @@
label runnix
kernel runnix
- append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8
label shell
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8 doshell
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8 doshell
label ssh
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8 doshell_ssh
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8 doshell_ssh
label xrunnix
kernel Xrunnix
- append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide=nodma rootdelay=10 console=ttyS0,38400n8
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8
label memtest
kernel memtest
Modified: branches/1.0/project/runnix/files/configs/default-serial.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/default-serial.cfg 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/runnix/files/configs/default-serial.cfg 2011-12-22 03:36:26 UTC (rev 5326)
@@ -7,19 +7,19 @@
label runnix
kernel runnix
- append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,19200n8
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
label shell
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,19200n8 doshell
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell
label ssh
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,19200n8 doshell_ssh
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell_ssh
label xrunnix
kernel Xrunnix
- append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide=nodma rootdelay=10 console=ttyS0,19200n8
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
label memtest
kernel memtest
Modified: branches/1.0/project/runnix/files/configs/default.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/default.cfg 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/runnix/files/configs/default.cfg 2011-12-22 03:36:26 UTC (rev 5326)
@@ -7,19 +7,19 @@
label runnix
kernel runnix
- append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10
label shell
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 doshell
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 doshell
label ssh
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 doshell_ssh
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 doshell_ssh
label xrunnix
kernel Xrunnix
- append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide=nodma rootdelay=10
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10
label memtest
kernel memtest
Modified: branches/1.0/project/runnix/files/configs/wrap.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/wrap.cfg 2011-12-21 23:59:05 UTC (rev 5325)
+++ branches/1.0/project/runnix/files/configs/wrap.cfg 2011-12-22 03:36:26 UTC (rev 5326)
@@ -7,19 +7,19 @@
label runnix
kernel runnix
- append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8
label shell
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8 doshell
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8 doshell
label ssh
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0 ide_core.nodma=1.1 rootdelay=10 console=ttyS0,38400n8 doshell_ssh
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8 doshell_ssh
label xrunnix
kernel Xrunnix
- append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto ide=nodma rootdelay=10 console=ttyS0,38400n8
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,38400n8
label memtest
kernel memtest
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2011-12-22 03:57:05
|
Revision: 5327
http://astlinux.svn.sourceforge.net/astlinux/?rev=5327&view=rev
Author: abelbeck
Date: 2011-12-22 03:56:59 +0000 (Thu, 22 Dec 2011)
Log Message:
-----------
kernel configs, runnix and astlinux, add a few more PATA drivers
Modified Paths:
--------------
branches/1.0/project/astlinux/geni586/linux-smp.config
branches/1.0/project/astlinux/geni586/linux.config
branches/1.0/project/runnix/geni586/linux.config
Modified: branches/1.0/project/astlinux/geni586/linux-smp.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux-smp.config 2011-12-22 03:36:26 UTC (rev 5326)
+++ branches/1.0/project/astlinux/geni586/linux-smp.config 2011-12-22 03:56:59 UTC (rev 5327)
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35.13
-# Wed Dec 21 10:53:16 2011
+# Wed Dec 21 21:49:18 2011
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
@@ -1064,10 +1064,10 @@
#
# PATA SFF controllers with BMDMA
#
-# CONFIG_PATA_ALI is not set
+CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
+CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
@@ -1089,8 +1089,8 @@
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
Modified: branches/1.0/project/astlinux/geni586/linux.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux.config 2011-12-22 03:36:26 UTC (rev 5326)
+++ branches/1.0/project/astlinux/geni586/linux.config 2011-12-22 03:56:59 UTC (rev 5327)
@@ -1054,10 +1054,10 @@
#
# PATA SFF controllers with BMDMA
#
-# CONFIG_PATA_ALI is not set
+CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
+CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
@@ -1079,8 +1079,8 @@
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2011-12-22 03:36:26 UTC (rev 5326)
+++ branches/1.0/project/runnix/geni586/linux.config 2011-12-22 03:56:59 UTC (rev 5327)
@@ -693,10 +693,10 @@
#
# PATA SFF controllers with BMDMA
#
-# CONFIG_PATA_ALI is not set
+CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
+CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
@@ -718,8 +718,8 @@
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
+CONFIG_PATA_PDC2027X=y
+CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2011-12-22 04:23:04
|
Revision: 5329
http://astlinux.svn.sourceforge.net/astlinux/?rev=5329&view=rev
Author: abelbeck
Date: 2011-12-22 04:22:57 +0000 (Thu, 22 Dec 2011)
Log Message:
-----------
astlinux/initrd, we now only use /dev/sd[a-h] drives
Modified Paths:
--------------
branches/1.0/project/astlinux/device_table.txt
branches/1.0/project/initrd/device_table_dev.txt
branches/1.0/project/initrd/target_skeleton/linuxrc
Modified: branches/1.0/project/astlinux/device_table.txt
===================================================================
--- branches/1.0/project/astlinux/device_table.txt 2011-12-22 04:13:33 UTC (rev 5328)
+++ branches/1.0/project/astlinux/device_table.txt 2011-12-22 04:22:57 UTC (rev 5329)
@@ -97,22 +97,22 @@
#/stat/dev/ubda b 640 0 0 98 1 1 1 15
# IDE Devices
-/stat/dev/hda b 640 0 0 3 0 0 0 -
-/stat/dev/hda b 640 0 0 3 1 1 1 15
-/stat/dev/hdb b 640 0 0 3 64 0 0 -
-/stat/dev/hdb b 640 0 0 3 65 1 1 15
-/stat/dev/hdc b 640 0 0 22 0 0 0 -
-/stat/dev/hdc b 640 0 0 22 1 1 1 15
-/stat/dev/hdd b 640 0 0 22 64 0 0 -
-/stat/dev/hdd b 640 0 0 22 65 1 1 15
-/stat/dev/hde b 640 0 0 33 0 0 0 -
-/stat/dev/hde b 640 0 0 33 1 1 1 15
-/stat/dev/hdf b 640 0 0 33 64 0 0 -
-/stat/dev/hdf b 640 0 0 33 65 1 1 15
-/stat/dev/hdg b 640 0 0 34 0 0 0 -
-/stat/dev/hdg b 640 0 0 34 1 1 1 15
-/stat/dev/hdh b 640 0 0 34 64 0 0 -
-/stat/dev/hdh b 640 0 0 34 65 1 1 15
+#/stat/dev/hda b 640 0 0 3 0 0 0 -
+#/stat/dev/hda b 640 0 0 3 1 1 1 15
+#/stat/dev/hdb b 640 0 0 3 64 0 0 -
+#/stat/dev/hdb b 640 0 0 3 65 1 1 15
+#/stat/dev/hdc b 640 0 0 22 0 0 0 -
+#/stat/dev/hdc b 640 0 0 22 1 1 1 15
+#/stat/dev/hdd b 640 0 0 22 64 0 0 -
+#/stat/dev/hdd b 640 0 0 22 65 1 1 15
+#/stat/dev/hde b 640 0 0 33 0 0 0 -
+#/stat/dev/hde b 640 0 0 33 1 1 1 15
+#/stat/dev/hdf b 640 0 0 33 64 0 0 -
+#/stat/dev/hdf b 640 0 0 33 65 1 1 15
+#/stat/dev/hdg b 640 0 0 34 0 0 0 -
+#/stat/dev/hdg b 640 0 0 34 1 1 1 15
+#/stat/dev/hdh b 640 0 0 34 64 0 0 -
+#/stat/dev/hdh b 640 0 0 34 65 1 1 15
# SCSI Devices
/stat/dev/sda b 640 0 0 8 0 0 0 -
@@ -123,14 +123,14 @@
/stat/dev/sdc b 640 0 0 8 33 1 1 15
/stat/dev/sdd b 640 0 0 8 48 0 0 -
/stat/dev/sdd b 640 0 0 8 49 1 1 15
-#/stat/dev/sde b 640 0 0 8 64 0 0 -
-#/stat/dev/sde b 640 0 0 8 65 1 1 15
-#/stat/dev/sdf b 640 0 0 8 80 0 0 -
-#/stat/dev/sdf b 640 0 0 8 81 1 1 15
-#/stat/dev/sdg b 640 0 0 8 96 0 0 -
-#/stat/dev/sdg b 640 0 0 8 97 1 1 15
-#/stat/dev/sdh b 640 0 0 8 112 0 0 -
-#/stat/dev/sdh b 640 0 0 8 113 1 1 15
+/stat/dev/sde b 640 0 0 8 64 0 0 -
+/stat/dev/sde b 640 0 0 8 65 1 1 15
+/stat/dev/sdf b 640 0 0 8 80 0 0 -
+/stat/dev/sdf b 640 0 0 8 81 1 1 15
+/stat/dev/sdg b 640 0 0 8 96 0 0 -
+/stat/dev/sdg b 640 0 0 8 97 1 1 15
+/stat/dev/sdh b 640 0 0 8 112 0 0 -
+/stat/dev/sdh b 640 0 0 8 113 1 1 15
#/stat/dev/sg c 640 0 0 21 0 0 1 15
#/stat/dev/scd b 640 0 0 11 0 0 1 15
#/stat/dev/st c 640 0 0 9 0 0 1 8
@@ -209,22 +209,22 @@
#/dev/sndstat c 666 0 29 14 6 - - -
#/dev/ubda b 640 0 0 98 0 0 0 -
#/dev/ubda b 640 0 0 98 1 1 1 15
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-/dev/hdc b 640 0 0 22 0 0 0 -
-/dev/hdc b 640 0 0 22 1 1 1 15
-/dev/hdd b 640 0 0 22 64 0 0 -
-/dev/hdd b 640 0 0 22 65 1 1 15
-/dev/hde b 640 0 0 33 0 0 0 -
-/dev/hde b 640 0 0 33 1 1 1 15
-/dev/hdf b 640 0 0 33 64 0 0 -
-/dev/hdf b 640 0 0 33 65 1 1 15
-/dev/hdg b 640 0 0 34 0 0 0 -
-/dev/hdg b 640 0 0 34 1 1 1 15
-/dev/hdh b 640 0 0 34 64 0 0 -
-/dev/hdh b 640 0 0 34 65 1 1 15
+#/dev/hda b 640 0 0 3 0 0 0 -
+#/dev/hda b 640 0 0 3 1 1 1 15
+#/dev/hdb b 640 0 0 3 64 0 0 -
+#/dev/hdb b 640 0 0 3 65 1 1 15
+#/dev/hdc b 640 0 0 22 0 0 0 -
+#/dev/hdc b 640 0 0 22 1 1 1 15
+#/dev/hdd b 640 0 0 22 64 0 0 -
+#/dev/hdd b 640 0 0 22 65 1 1 15
+#/dev/hde b 640 0 0 33 0 0 0 -
+#/dev/hde b 640 0 0 33 1 1 1 15
+#/dev/hdf b 640 0 0 33 64 0 0 -
+#/dev/hdf b 640 0 0 33 65 1 1 15
+#/dev/hdg b 640 0 0 34 0 0 0 -
+#/dev/hdg b 640 0 0 34 1 1 1 15
+#/dev/hdh b 640 0 0 34 64 0 0 -
+#/dev/hdh b 640 0 0 34 65 1 1 15
/dev/sda b 640 0 0 8 0 0 0 -
/dev/sda b 640 0 0 8 1 1 1 15
/dev/sdb b 640 0 0 8 16 0 0 -
@@ -233,14 +233,14 @@
/dev/sdc b 640 0 0 8 33 1 1 15
/dev/sdd b 640 0 0 8 48 0 0 -
/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
+/dev/sde b 640 0 0 8 64 0 0 -
+/dev/sde b 640 0 0 8 65 1 1 15
+/dev/sdf b 640 0 0 8 80 0 0 -
+/dev/sdf b 640 0 0 8 81 1 1 15
+/dev/sdg b 640 0 0 8 96 0 0 -
+/dev/sdg b 640 0 0 8 97 1 1 15
+/dev/sdh b 640 0 0 8 112 0 0 -
+/dev/sdh b 640 0 0 8 113 1 1 15
#/dev/sg c 640 0 0 21 0 0 1 15
#/dev/scd b 640 0 0 11 0 0 1 15
#/dev/st c 640 0 0 9 0 0 1 8
Modified: branches/1.0/project/initrd/device_table_dev.txt
===================================================================
--- branches/1.0/project/initrd/device_table_dev.txt 2011-12-22 04:13:33 UTC (rev 5328)
+++ branches/1.0/project/initrd/device_table_dev.txt 2011-12-22 04:22:57 UTC (rev 5329)
@@ -86,22 +86,22 @@
#/dev/ubda b 640 0 0 98 1 1 1 15
# IDE Devices
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-/dev/hdc b 640 0 0 22 0 0 0 -
-/dev/hdc b 640 0 0 22 1 1 1 15
-/dev/hdd b 640 0 0 22 64 0 0 -
-/dev/hdd b 640 0 0 22 65 1 1 15
-/dev/hde b 640 0 0 33 0 0 0 -
-/dev/hde b 640 0 0 33 1 1 1 15
-/dev/hdf b 640 0 0 33 64 0 0 -
-/dev/hdf b 640 0 0 33 65 1 1 15
-/dev/hdg b 640 0 0 34 0 0 0 -
-/dev/hdg b 640 0 0 34 1 1 1 15
-/dev/hdh b 640 0 0 34 64 0 0 -
-/dev/hdh b 640 0 0 34 65 1 1 15
+#/dev/hda b 640 0 0 3 0 0 0 -
+#/dev/hda b 640 0 0 3 1 1 1 15
+#/dev/hdb b 640 0 0 3 64 0 0 -
+#/dev/hdb b 640 0 0 3 65 1 1 15
+#/dev/hdc b 640 0 0 22 0 0 0 -
+#/dev/hdc b 640 0 0 22 1 1 1 15
+#/dev/hdd b 640 0 0 22 64 0 0 -
+#/dev/hdd b 640 0 0 22 65 1 1 15
+#/dev/hde b 640 0 0 33 0 0 0 -
+#/dev/hde b 640 0 0 33 1 1 1 15
+#/dev/hdf b 640 0 0 33 64 0 0 -
+#/dev/hdf b 640 0 0 33 65 1 1 15
+#/dev/hdg b 640 0 0 34 0 0 0 -
+#/dev/hdg b 640 0 0 34 1 1 1 15
+#/dev/hdh b 640 0 0 34 64 0 0 -
+#/dev/hdh b 640 0 0 34 65 1 1 15
# SCSI Devices
/dev/sda b 640 0 0 8 0 0 0 -
@@ -112,14 +112,14 @@
/dev/sdc b 640 0 0 8 33 1 1 15
/dev/sdd b 640 0 0 8 48 0 0 -
/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
+/dev/sde b 640 0 0 8 64 0 0 -
+/dev/sde b 640 0 0 8 65 1 1 15
+/dev/sdf b 640 0 0 8 80 0 0 -
+/dev/sdf b 640 0 0 8 81 1 1 15
+/dev/sdg b 640 0 0 8 96 0 0 -
+/dev/sdg b 640 0 0 8 97 1 1 15
+/dev/sdh b 640 0 0 8 112 0 0 -
+/dev/sdh b 640 0 0 8 113 1 1 15
#/dev/sg c 640 0 0 21 0 0 1 15
#/dev/scd b 640 0 0 11 0 0 1 15
#/dev/st c 640 0 0 9 0 0 1 8
Modified: branches/1.0/project/initrd/target_skeleton/linuxrc
===================================================================
--- branches/1.0/project/initrd/target_skeleton/linuxrc 2011-12-22 04:13:33 UTC (rev 5328)
+++ branches/1.0/project/initrd/target_skeleton/linuxrc 2011-12-22 04:22:57 UTC (rev 5329)
@@ -1,8 +1,7 @@
#!/bin/sh
export PATH=/usr/bin:/usr/sbin:/bin:/sbin
-PARTS="hda1 hdb1 hdc1 hdd1 hde1 hdf1 hdg1 sda1 sdb1 sdc1 sdd1"
-DRIVES="hda hdb hdc hdd hde hdf hdg sda sdb sdc sdd"
+DRIVES="sda sdb sdc sdd sde sdf sdg sdh"
# Max image size in megabytes
IMAGEFS_SIZE=128
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2012-12-02 01:19:53
|
Revision: 5778
http://astlinux.svn.sourceforge.net/astlinux/?rev=5778&view=rev
Author: abelbeck
Date: 2012-12-02 01:19:46 +0000 (Sun, 02 Dec 2012)
Log Message:
-----------
Enable 'lsilogic' SCSI driver for VMware, both RUNNIX and AstLinux
Modified Paths:
--------------
branches/1.0/project/astlinux/geni586/linux-smp.config
branches/1.0/project/astlinux/geni586/linux.config
branches/1.0/project/runnix/geni586/linux.config
Modified: branches/1.0/project/astlinux/geni586/linux-smp.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux-smp.config 2012-11-30 15:28:44 UTC (rev 5777)
+++ branches/1.0/project/astlinux/geni586/linux-smp.config 2012-12-02 01:19:46 UTC (rev 5778)
@@ -958,7 +958,7 @@
#
# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
@@ -1008,7 +1008,11 @@
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
Modified: branches/1.0/project/astlinux/geni586/linux.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux.config 2012-11-30 15:28:44 UTC (rev 5777)
+++ branches/1.0/project/astlinux/geni586/linux.config 2012-12-02 01:19:46 UTC (rev 5778)
@@ -948,7 +948,7 @@
#
# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
@@ -998,7 +998,11 @@
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2012-11-30 15:28:44 UTC (rev 5777)
+++ branches/1.0/project/runnix/geni586/linux.config 2012-12-02 01:19:46 UTC (rev 5778)
@@ -574,7 +574,7 @@
#
# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
@@ -632,7 +632,11 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2012-12-02 07:56:10
|
Revision: 5781
http://astlinux.svn.sourceforge.net/astlinux/?rev=5781&view=rev
Author: abelbeck
Date: 2012-12-02 07:56:04 +0000 (Sun, 02 Dec 2012)
Log Message:
-----------
2nd try, Enable 'lsilogic' SCSI driver for VMware, both RUNNIX and AstLinux
Modified Paths:
--------------
branches/1.0/project/astlinux/geni586/linux-smp.config
branches/1.0/project/astlinux/geni586/linux.config
branches/1.0/project/runnix/geni586/linux.config
Modified: branches/1.0/project/astlinux/geni586/linux-smp.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux-smp.config 2012-12-02 03:21:20 UTC (rev 5780)
+++ branches/1.0/project/astlinux/geni586/linux-smp.config 2012-12-02 07:56:04 UTC (rev 5781)
@@ -1008,11 +1008,7 @@
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
@@ -1124,7 +1120,13 @@
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
-# CONFIG_FUSION is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
Modified: branches/1.0/project/astlinux/geni586/linux.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux.config 2012-12-02 03:21:20 UTC (rev 5780)
+++ branches/1.0/project/astlinux/geni586/linux.config 2012-12-02 07:56:04 UTC (rev 5781)
@@ -998,11 +998,7 @@
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
@@ -1114,7 +1110,13 @@
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
-# CONFIG_FUSION is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2012-12-02 03:21:20 UTC (rev 5780)
+++ branches/1.0/project/runnix/geni586/linux.config 2012-12-02 07:56:04 UTC (rev 5781)
@@ -632,11 +632,7 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
@@ -754,7 +750,13 @@
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
-# CONFIG_FUSION is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2014-04-03 22:36:31
|
Revision: 6486
http://sourceforge.net/p/astlinux/code/6486
Author: abelbeck
Date: 2014-04-03 22:36:29 +0000 (Thu, 03 Apr 2014)
Log Message:
-----------
On boot use 'e2fsck -y' instead of 'e2fsck -p' since common corruption will not be automatically fixed with '-p'. Thanks to Martin Sunstrum for demonstrating the problem.
Ref: http://askubuntu.com/questions/151025/how-can-i-make-fsck-run-non-interactively-at-boot-time
Modified Paths:
--------------
branches/1.0/project/astlinux/target_skeleton/etc/rc
branches/1.0/project/initrd/target_skeleton/linuxrc
Modified: branches/1.0/project/astlinux/target_skeleton/etc/rc
===================================================================
--- branches/1.0/project/astlinux/target_skeleton/etc/rc 2014-04-03 21:03:31 UTC (rev 6485)
+++ branches/1.0/project/astlinux/target_skeleton/etc/rc 2014-04-03 22:36:29 UTC (rev 6486)
@@ -15,7 +15,7 @@
fi
echo "Checking $1"
- e2fsck -p $1 >/dev/null
+ e2fsck -y $1 >/dev/null
status="$?"
Modified: branches/1.0/project/initrd/target_skeleton/linuxrc
===================================================================
--- branches/1.0/project/initrd/target_skeleton/linuxrc 2014-04-03 21:03:31 UTC (rev 6485)
+++ branches/1.0/project/initrd/target_skeleton/linuxrc 2014-04-03 22:36:29 UTC (rev 6486)
@@ -108,7 +108,7 @@
# check fsck here... (toss stdout, but keep stderr)
- e2fsck -p $ASTURW >/dev/null
+ e2fsck -y $ASTURW >/dev/null
status=$?
case $status in
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2016-02-20 15:54:49
|
Revision: 7547
http://sourceforge.net/p/astlinux/code/7547
Author: abelbeck
Date: 2016-02-20 15:54:46 +0000 (Sat, 20 Feb 2016)
Log Message:
-----------
runnix and runnix-iso, add /.ssh symlink to /tmp/.ssh
Added Paths:
-----------
branches/1.0/project/runnix/target_skeleton/.ssh
branches/1.0/project/runnix-iso/target_skeleton/.ssh
Added: branches/1.0/project/runnix/target_skeleton/.ssh
===================================================================
--- branches/1.0/project/runnix/target_skeleton/.ssh (rev 0)
+++ branches/1.0/project/runnix/target_skeleton/.ssh 2016-02-20 15:54:46 UTC (rev 7547)
@@ -0,0 +1 @@
+link /tmp/.ssh
\ No newline at end of file
Property changes on: branches/1.0/project/runnix/target_skeleton/.ssh
___________________________________________________________________
Added: svn:special
## -0,0 +1 ##
+*
\ No newline at end of property
Added: branches/1.0/project/runnix-iso/target_skeleton/.ssh
===================================================================
--- branches/1.0/project/runnix-iso/target_skeleton/.ssh (rev 0)
+++ branches/1.0/project/runnix-iso/target_skeleton/.ssh 2016-02-20 15:54:46 UTC (rev 7547)
@@ -0,0 +1 @@
+link /tmp/.ssh
\ No newline at end of file
Property changes on: branches/1.0/project/runnix-iso/target_skeleton/.ssh
___________________________________________________________________
Added: svn:special
## -0,0 +1 ##
+*
\ No newline at end of property
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2016-02-20 18:57:48
|
Revision: 7549
http://sourceforge.net/p/astlinux/code/7549
Author: abelbeck
Date: 2016-02-20 18:57:46 +0000 (Sat, 20 Feb 2016)
Log Message:
-----------
runnix and runnix-iso kernel tweaks, enable 'vmxnet3' NIC driver and disable unneeded 'ipip' support
Modified Paths:
--------------
branches/1.0/project/runnix/geni586/linux.config
branches/1.0/project/runnix-iso/geni586/linux.config
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2016-02-20 17:41:00 UTC (rev 7548)
+++ branches/1.0/project/runnix/geni586/linux.config 2016-02-20 18:57:46 UTC (rev 7549)
@@ -484,7 +484,7 @@
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
+# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
@@ -492,7 +492,7 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@@ -1027,7 +1027,7 @@
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
-# CONFIG_VMXNET3 is not set
+CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
Modified: branches/1.0/project/runnix-iso/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix-iso/geni586/linux.config 2016-02-20 17:41:00 UTC (rev 7548)
+++ branches/1.0/project/runnix-iso/geni586/linux.config 2016-02-20 18:57:46 UTC (rev 7549)
@@ -484,7 +484,7 @@
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
+# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
@@ -492,7 +492,7 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@@ -1028,7 +1028,7 @@
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
-# CONFIG_VMXNET3 is not set
+CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2016-04-08 16:30:00
|
Revision: 7631
http://sourceforge.net/p/astlinux/code/7631
Author: abelbeck
Date: 2016-04-08 16:29:57 +0000 (Fri, 08 Apr 2016)
Log Message:
-----------
all kernel configs, enable USB 3.0 driver support: CONFIG_USB_XHCI_HCD=y
Modified Paths:
--------------
branches/1.0/project/astlinux/geni586/linux-smp.config
branches/1.0/project/astlinux/geni586/linux.config
branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
branches/1.0/project/astlinux/genx86_64/linux-smp.config
branches/1.0/project/runnix/geni586/linux.config
branches/1.0/project/runnix-iso/geni586/linux.config
Modified: branches/1.0/project/astlinux/geni586/linux-smp.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux-smp.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/astlinux/geni586/linux-smp.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -2178,7 +2178,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
Modified: branches/1.0/project/astlinux/geni586/linux.config
===================================================================
--- branches/1.0/project/astlinux/geni586/linux.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/astlinux/geni586/linux.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -2165,7 +2165,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
Modified: branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
===================================================================
--- branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -2152,7 +2152,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
Modified: branches/1.0/project/astlinux/genx86_64/linux-smp.config
===================================================================
--- branches/1.0/project/astlinux/genx86_64/linux-smp.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/astlinux/genx86_64/linux-smp.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -2120,7 +2120,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/runnix/geni586/linux.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -1330,7 +1330,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
Modified: branches/1.0/project/runnix-iso/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix-iso/geni586/linux.config 2016-04-03 19:13:19 UTC (rev 7630)
+++ branches/1.0/project/runnix-iso/geni586/linux.config 2016-04-08 16:29:57 UTC (rev 7631)
@@ -1331,7 +1331,8 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2017-05-21 00:38:51
|
Revision: 8317
http://sourceforge.net/p/astlinux/code/8317
Author: abelbeck
Date: 2017-05-21 00:38:48 +0000 (Sun, 21 May 2017)
Log Message:
-----------
Change default serial baud rate to 115200
Modified Paths:
--------------
branches/1.0/project/astlinux/board/geni586/target_skeleton/etc/inittab
branches/1.0/project/astlinux/board/geni586-serial/runnix.conf
branches/1.0/project/astlinux/board/geni586-serial/target_skeleton/etc/inittab
branches/1.0/project/astlinux/board/genx86_64/target_skeleton/etc/inittab
branches/1.0/project/astlinux/board/genx86_64-serial/runnix.conf
branches/1.0/project/astlinux/board/genx86_64-serial/target_skeleton/etc/inittab
branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/inittab
branches/1.0/project/runnix/files/configs/default-serial.cfg
branches/1.0/project/runnix/files/configs/default.cfg
branches/1.0/project/runnix/files/rootfs_vfat/syslinux.cfg
branches/1.0/project/runnix-iso/files/configs/isolinux-serial.cfg
Added Paths:
-----------
branches/1.0/project/runnix/files/configs/net5501.cfg
Modified: branches/1.0/project/astlinux/board/geni586/target_skeleton/etc/inittab
===================================================================
--- branches/1.0/project/astlinux/board/geni586/target_skeleton/etc/inittab 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/geni586/target_skeleton/etc/inittab 2017-05-21 00:38:48 UTC (rev 8317)
@@ -5,10 +5,10 @@
#
console::sysinit:/etc/rc sysinit
-console::respawn:/sbin/getty -L 19200 /dev/tty1 linux
+console::respawn:/sbin/getty -L 115200 /dev/tty1 linux
-# ttyS0::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
-# ttyS1::respawn:/sbin/getty -L 19200 /dev/ttyS1 vt100
+# ttyS0::respawn:/sbin/getty -L 115200 /dev/ttyS0 vt100
+# ttyS1::respawn:/sbin/getty -L 115200 /dev/ttyS1 vt100
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
Modified: branches/1.0/project/astlinux/board/geni586-serial/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/geni586-serial/runnix.conf 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/geni586-serial/runnix.conf 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,115200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/geni586-serial/target_skeleton/etc/inittab
===================================================================
--- branches/1.0/project/astlinux/board/geni586-serial/target_skeleton/etc/inittab 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/geni586-serial/target_skeleton/etc/inittab 2017-05-21 00:38:48 UTC (rev 8317)
@@ -5,7 +5,7 @@
#
console::sysinit:/etc/rc sysinit
-console::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
+console::respawn:/sbin/getty -L 115200 /dev/ttyS0 vt100
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
Modified: branches/1.0/project/astlinux/board/genx86_64/target_skeleton/etc/inittab
===================================================================
--- branches/1.0/project/astlinux/board/genx86_64/target_skeleton/etc/inittab 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/genx86_64/target_skeleton/etc/inittab 2017-05-21 00:38:48 UTC (rev 8317)
@@ -5,10 +5,10 @@
#
console::sysinit:/etc/rc sysinit
-console::respawn:/sbin/getty -L 19200 /dev/tty1 linux
+console::respawn:/sbin/getty -L 115200 /dev/tty1 linux
-# ttyS0::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
-# ttyS1::respawn:/sbin/getty -L 19200 /dev/ttyS1 vt100
+# ttyS0::respawn:/sbin/getty -L 115200 /dev/ttyS0 vt100
+# ttyS1::respawn:/sbin/getty -L 115200 /dev/ttyS1 vt100
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
Modified: branches/1.0/project/astlinux/board/genx86_64-serial/runnix.conf
===================================================================
--- branches/1.0/project/astlinux/board/genx86_64-serial/runnix.conf 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/genx86_64-serial/runnix.conf 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,5 +1,5 @@
# Kernel command line
-KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=genx86_64 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,19200n8"
+KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=genx86_64 astimg=ASTVER.run astkd=auto asturw=auto astlive libata.dma=3 console=ttyS0,115200n8"
# Offset for root filesystem
# OFFSET="32256"
# location of kernel binary inside root (include mountpoint)
Modified: branches/1.0/project/astlinux/board/genx86_64-serial/target_skeleton/etc/inittab
===================================================================
--- branches/1.0/project/astlinux/board/genx86_64-serial/target_skeleton/etc/inittab 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/genx86_64-serial/target_skeleton/etc/inittab 2017-05-21 00:38:48 UTC (rev 8317)
@@ -5,7 +5,7 @@
#
console::sysinit:/etc/rc sysinit
-console::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
+console::respawn:/sbin/getty -L 115200 /dev/ttyS0 vt100
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
Modified: branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/inittab
===================================================================
--- branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/inittab 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/inittab 2017-05-21 00:38:48 UTC (rev 8317)
@@ -5,10 +5,10 @@
#
console::sysinit:/etc/rc sysinit
-console::respawn:/sbin/getty -L 19200 /dev/tty1 linux
+console::respawn:/sbin/getty -L 115200 /dev/tty1 linux
-# ttyS0::respawn:/sbin/getty -L 19200 /dev/ttyS0 vt100
-# ttyS1::respawn:/sbin/getty -L 19200 /dev/ttyS1 vt100
+# ttyS0::respawn:/sbin/getty -L 115200 /dev/ttyS0 vt100
+# ttyS1::respawn:/sbin/getty -L 115200 /dev/ttyS1 vt100
# Stuff to do before rebooting
::ctrlaltdel:/sbin/reboot
Modified: branches/1.0/project/runnix/files/configs/default-serial.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/default-serial.cfg 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/runnix/files/configs/default-serial.cfg 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,4 +1,4 @@
-serial 0 19200
+serial 0 115200
console 0
default runnix
timeout 50
@@ -7,21 +7,21 @@
label runnix
kernel runnix
- append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,115200n8
label shell
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,115200n8 doshell
label ssh
kernel runnix
- append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell_ssh
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,115200n8 doshell_ssh
label xrunnix
kernel Xrunnix
- append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,115200n8
label memtest
kernel memtest
- append console=ttyS0,19200n8
+ append console=ttyS0,115200n8
Modified: branches/1.0/project/runnix/files/configs/default.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/default.cfg 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/runnix/files/configs/default.cfg 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,4 +1,4 @@
-# serial 0 19200
+# serial 0 115200
# console 1
default runnix
timeout 50
Added: branches/1.0/project/runnix/files/configs/net5501.cfg
===================================================================
--- branches/1.0/project/runnix/files/configs/net5501.cfg (rev 0)
+++ branches/1.0/project/runnix/files/configs/net5501.cfg 2017-05-21 00:38:48 UTC (rev 8317)
@@ -0,0 +1,27 @@
+serial 0 19200
+console 0
+default runnix
+timeout 50
+prompt 1
+display boot.msg
+
+label runnix
+ kernel runnix
+ append initrd=runnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
+
+label shell
+ kernel runnix
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell
+
+label ssh
+ kernel runnix
+ append initrd=runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8 doshell_ssh
+
+label xrunnix
+ kernel Xrunnix
+ append initrd=Xrunnix.img root=/dev/ram0 rw init=/runnix runimg=auto libata.dma=3 rootdelay=10 console=ttyS0,19200n8
+
+label memtest
+ kernel memtest
+ append console=ttyS0,19200n8
+
Modified: branches/1.0/project/runnix/files/rootfs_vfat/syslinux.cfg
===================================================================
--- branches/1.0/project/runnix/files/rootfs_vfat/syslinux.cfg 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/runnix/files/rootfs_vfat/syslinux.cfg 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,4 +1,4 @@
-# serial 0 19200
+# serial 0 115200
# console 1
default runnix
timeout 50
Modified: branches/1.0/project/runnix-iso/files/configs/isolinux-serial.cfg
===================================================================
--- branches/1.0/project/runnix-iso/files/configs/isolinux-serial.cfg 2017-05-20 22:28:15 UTC (rev 8316)
+++ branches/1.0/project/runnix-iso/files/configs/isolinux-serial.cfg 2017-05-21 00:38:48 UTC (rev 8317)
@@ -1,4 +1,4 @@
-serial 0 19200
+serial 0 115200
console 0
default install
timeout 10
@@ -7,5 +7,5 @@
label install
kernel /runnix/runnix
- append initrd=/runnix/runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=8 console=ttyS0,19200n8
+ append initrd=/runnix/runnix.img root=/dev/ram0 ro init=/runnix runimg=auto libata.dma=3 rootdelay=8 console=ttyS0,115200n8
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2017-05-24 23:35:19
|
Revision: 8335
http://sourceforge.net/p/astlinux/code/8335
Author: abelbeck
Date: 2017-05-24 23:35:17 +0000 (Wed, 24 May 2017)
Log Message:
-----------
Enable virtio-scsi as a bootable disk driver for both RUNNIX and the genx86_64-vm AstLinux, adds very little extra size to RUNNIX. Also add virtio-scsi to the ISO Installer (runnix-iso). Thanks much to Michael Keuter for the suggestion and detailed testing
Modified Paths:
--------------
branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/rc.modules
branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
branches/1.0/project/astlinux/target_skeleton/etc/rc
branches/1.0/project/runnix/geni586/linux.config
branches/1.0/project/runnix/target_skeleton/runnix
branches/1.0/project/runnix-iso/geni586/linux.config
branches/1.0/project/runnix-iso/target_skeleton/runnix
Modified: branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/rc.modules
===================================================================
--- branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/rc.modules 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/astlinux/board/genx86_64-vm/target_skeleton/etc/rc.modules 2017-05-24 23:35:17 UTC (rev 8335)
@@ -4,7 +4,7 @@
##
## Ethernet support
## Virtual first, then Emulated
-virtio-pci
+virtio_net
vmxnet3
pcnet32
e1000
Modified: branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
===================================================================
--- branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2017-05-24 23:35:17 UTC (rev 8335)
@@ -249,7 +249,7 @@
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
@@ -380,6 +380,7 @@
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
+CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
@@ -1206,7 +1207,7 @@
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_VIRTIO is not set
+CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
@@ -2765,12 +2766,12 @@
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRTIO=m
+CONFIG_VIRTIO=y
#
# Virtio drivers
#
-CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set
@@ -3294,7 +3295,8 @@
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -3388,7 +3390,7 @@
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
Modified: branches/1.0/project/astlinux/target_skeleton/etc/rc
===================================================================
--- branches/1.0/project/astlinux/target_skeleton/etc/rc 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/astlinux/target_skeleton/etc/rc 2017-05-24 23:35:17 UTC (rev 8335)
@@ -224,6 +224,8 @@
(while read i; do
if [ "$i" = "sleep" ]; then
sleep 2
+ elif [ "$i" = "virtio-pci" ]; then
+ modprobe virtio_net 2>/dev/null
elif [ "$i" != "rtc" ]; then
modprobe $i 2>/dev/null
fi
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/runnix/geni586/linux.config 2017-05-24 23:35:17 UTC (rev 8335)
@@ -232,7 +232,7 @@
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
@@ -375,6 +375,7 @@
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
+CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
@@ -669,6 +670,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
@@ -845,6 +847,7 @@
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
+CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
@@ -978,6 +981,7 @@
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
+# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
@@ -1311,6 +1315,7 @@
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
+# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
@@ -1318,6 +1323,7 @@
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -1951,11 +1957,13 @@
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
#
# Virtio drivers
#
-# CONFIG_VIRTIO_PCI is not set
+CONFIG_VIRTIO_PCI=y
+# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
@@ -2416,7 +2424,7 @@
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
+CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
@@ -2493,7 +2501,7 @@
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
Modified: branches/1.0/project/runnix/target_skeleton/runnix
===================================================================
--- branches/1.0/project/runnix/target_skeleton/runnix 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/runnix/target_skeleton/runnix 2017-05-24 23:35:17 UTC (rev 8335)
@@ -157,6 +157,9 @@
fi
done
+# Control kernel console messages
+sysctl -w kernel.printk="3 4 1 3" >/dev/null
+
hostname runnix
# Loader not found
Modified: branches/1.0/project/runnix-iso/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix-iso/geni586/linux.config 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/runnix-iso/geni586/linux.config 2017-05-24 23:35:17 UTC (rev 8335)
@@ -232,7 +232,7 @@
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
@@ -375,6 +375,7 @@
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
+CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
@@ -669,6 +670,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
@@ -846,6 +848,7 @@
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
+CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
@@ -979,6 +982,7 @@
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
+# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
@@ -1312,6 +1316,7 @@
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
+# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
@@ -1319,6 +1324,7 @@
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -1952,11 +1958,13 @@
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=y
#
# Virtio drivers
#
-# CONFIG_VIRTIO_PCI is not set
+CONFIG_VIRTIO_PCI=y
+# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
@@ -2417,7 +2425,7 @@
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
+CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
@@ -2494,7 +2502,7 @@
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
Modified: branches/1.0/project/runnix-iso/target_skeleton/runnix
===================================================================
--- branches/1.0/project/runnix-iso/target_skeleton/runnix 2017-05-24 15:41:24 UTC (rev 8334)
+++ branches/1.0/project/runnix-iso/target_skeleton/runnix 2017-05-24 23:35:17 UTC (rev 8335)
@@ -166,6 +166,9 @@
done
fi
+# Control kernel console messages
+sysctl -w kernel.printk="3 4 1 3" >/dev/null
+
hostname runnix
# Loader not found
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2017-05-27 14:07:49
|
Revision: 8347
http://sourceforge.net/p/astlinux/code/8347
Author: abelbeck
Date: 2017-05-27 14:07:46 +0000 (Sat, 27 May 2017)
Log Message:
-----------
runnix and runnix-iso, enable virtio_net, only adds 8 KB to image, even though VM's offer a console, an SSH session is often more convenient
Modified Paths:
--------------
branches/1.0/project/runnix/geni586/linux.config
branches/1.0/project/runnix-iso/geni586/linux.config
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2017-05-27 02:23:29 UTC (rev 8346)
+++ branches/1.0/project/runnix/geni586/linux.config 2017-05-27 14:07:46 UTC (rev 8347)
@@ -981,7 +981,7 @@
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_VIRTIO_NET is not set
+CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
@@ -2525,6 +2525,6 @@
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-# CONFIG_AVERAGE is not set
+CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
Modified: branches/1.0/project/runnix-iso/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix-iso/geni586/linux.config 2017-05-27 02:23:29 UTC (rev 8346)
+++ branches/1.0/project/runnix-iso/geni586/linux.config 2017-05-27 14:07:46 UTC (rev 8347)
@@ -982,7 +982,7 @@
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_VIRTIO_NET is not set
+CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
@@ -2526,6 +2526,6 @@
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-# CONFIG_AVERAGE is not set
+CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <abe...@us...> - 2017-06-20 17:42:42
|
Revision: 8405
http://sourceforge.net/p/astlinux/code/8405
Author: abelbeck
Date: 2017-06-20 17:42:40 +0000 (Tue, 20 Jun 2017)
Log Message:
-----------
Enable VMWARE_PVSCSI=y (vmw_pvscsi) as a bootable disk driver for both RUNNIX and the genx86_64-vm AstLinux, adds very little extra size to RUNNIX. Also add vmw_pvscsi to the ISO Installer (runnix-iso)
Modified Paths:
--------------
branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
branches/1.0/project/runnix/geni586/linux.config
branches/1.0/project/runnix-iso/geni586/linux.config
Modified: branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config
===================================================================
--- branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2017-06-19 15:47:53 UTC (rev 8404)
+++ branches/1.0/project/astlinux/genx86_64/linux-smp-vm.config 2017-06-20 17:42:40 UTC (rev 8405)
@@ -1179,7 +1179,7 @@
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
-# CONFIG_VMWARE_PVSCSI is not set
+CONFIG_VMWARE_PVSCSI=y
# CONFIG_HYPERV_STORAGE is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
Modified: branches/1.0/project/runnix/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix/geni586/linux.config 2017-06-19 15:47:53 UTC (rev 8404)
+++ branches/1.0/project/runnix/geni586/linux.config 2017-06-20 17:42:40 UTC (rev 8405)
@@ -809,7 +809,7 @@
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
-# CONFIG_VMWARE_PVSCSI is not set
+CONFIG_VMWARE_PVSCSI=y
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
Modified: branches/1.0/project/runnix-iso/geni586/linux.config
===================================================================
--- branches/1.0/project/runnix-iso/geni586/linux.config 2017-06-19 15:47:53 UTC (rev 8404)
+++ branches/1.0/project/runnix-iso/geni586/linux.config 2017-06-20 17:42:40 UTC (rev 8405)
@@ -810,7 +810,7 @@
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
-# CONFIG_VMWARE_PVSCSI is not set
+CONFIG_VMWARE_PVSCSI=y
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X