Re: [Asterisk-java-users] How to use A-J to inject input to Dialplan?

[Yves A. <yv...@gm...>]

hi,

just very short... i am in a hurry...

:1 means first leg of the call....

what you mean is jumping to a priority?? (11) you should be able to do 
so... there is a parameter where you the specify the priority...
if thats not working... try to go with agi... let me know.... and 
explain your objective... dialplan is not complete / fully clear 2 me...

yves

Am 03.06.2013 15:01, schrieb Greg Horton:
> Hi all,
>
> I am having a problem where the ext-meetme module in the dialplan gets 
> to a point where it is waiting for PIN entry, after playing a 
> recording to request that.  This is the part of the Dialplan I refer to:
>
> [ Context 'ext-meetme' created by 'pbx_config' ]
>    '1024' =>         1. Macro(user-callerid,)                      [pbx_config]
>                      2. Set(MEETME_ROOMNUM=1024)                   [pbx_config]
>                      3. Set(MAX_PARTICIPANTS=2)                    [pbx_config]
>                      4. Set(MEETME_MUSIC=${MOHCLASS})              [pbx_config]
>                      5. Gosub(sub-record-check,s,1(conf,1024,always))
> [pbx_config]
>                      6. GotoIf($["${DIALSTATUS}" = "ANSWER"]?READPIN)
> [pbx_config]
>                      7. Answer()                                   [pbx_config]
>                      8. Wait(1)                                    [pbx_config]
>                      9. Set(PINCOUNT=0)                            [pbx_config]
>       [READPIN]      10. Read(PIN,enter-conf-pin-number,,,,)       [pbx_config]
>
> <THIS IS WHERE I WANT TO INJECT A DTMF STRING>
>
>                      11. GotoIf($[x${PIN} = x123]?USER)            [pbx_config]
>                      12. GotoIf($[x${PIN} = x321]?ADMIN)           [pbx_config]
>                      13. Set(PINCOUNT=$[${PINCOUNT}+1])            [pbx_config]
>                      14. GotoIf($[${PINCOUNT}>3]?h)                [pbx_config]
>                      15. Playback(conf-invalidpin)                 [pbx_config]
>                      16. Goto(READPIN)                             [pbx_config]
>       [ADMIN]        17. Set(MEETME_OPTS=aAoTqcIMsr)               [pbx_config]
>                      18. Goto(STARTMEETME,1)                       [pbx_config]
>       [USER]         19. Set(MEETME_OPTS=oTqcIMsr)                 [pbx_config]
>                      20. Goto(STARTMEETME,1)                       [pbx_config]
>
> Is there an A-J command to specifically address 1024@ext-meetme, entry 
> 11?  I am trying to use PlayDtmfAction, where normally I can pass DTMF 
> to a destination channel like SIP/101-000045c3a.  Now, I have tried so 
> many combinations and cannot get MeetMe to collect the digits of the PIN.
>
> When I make my call and collect Asterisk channel info, the destination 
> channel at this time is seen as 1024@from-internal:1.  Does the ":1" 
> refer to entry 1 in the from-internal module of the dial plan?
>
> I have tried things like 1024@from-internal:1, 
> Local/1024@from-internal:1, 1024@from-internal:11, and replacing 
> from-internal with ext-meetme in all of these.
>
> If I cannot get directly to this point, is there some other roundabout 
> way to achieve this goal?
>
> Please help as I am really stuck at this point.
>
> Thanks!
>
> Greg
>
>
> ------------------------------------------------------------------------------
> Get 100% visibility into Java/.NET code with AppDynamics Lite
> It's a free troubleshooting tool designed for production
> Get down to code-level detail for bottlenecks, with <2% overhead.
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap2
>
>
> _______________________________________________
> Asterisk-java-users mailing list
> Ast...@li...
> https://lists.sourceforge.net/lists/listinfo/asterisk-java-users