Tilt analysis results

[the_blue_jester]

Sorry if this is a silly question...

I am using the stack -> inspector to check where tilt may be in my system. I am using a script in SkyX to automate this and it is successful.

For the actal anlysis I appreciate it is divided into a 3 x 3 grid and then areas refernced as "1,1" etc. I know the text explains where 1,1 2,2 and 3,3 are but that doesn't help as it could be column, row OR row, column.

I assume as with standard plotting it's row, column (ie x,y) but could you confirm?

Also, as a related point is there any scope to allow the image to rotate for inspection/anlysis> The reason is that my camera cannot chage rotation due to the way the adapters etc are placed and for me the "top" (of the camera) ends up being to the "right" (of the screen). Obviously flipping will not align the screen display to the physical setup.

thanks

Paul

[the_blue_jester]

I've answered my first question - yes. I can see the diagrams at the top of the columns show each square on the 3x3 grid

[han.k]

Sorry for the late response. I missed you first posting.

Yes the icons show the position. Column HFD 31 indicates position 3 in X or horizontal axis, 1 the position in the Y axis.

You can rotate images in viewer menu Tools, Rotate Image. Rotate Arbitrary allows to rotate the image 90, 180 or 270 degrees without loss of quality. Saving making these rotation or flips permanent. The inspector tab should show the rotation.

Han

[the_blue_jester]

Han,

Thanks for the response. I appreciate the time you take with this excellent program.

Paul