Howto_Install_File::Scan::ClamAV_lower_Version_1.91

# perl -MCPAN -e shell
Are you ready for manual configuration? [yes] no
cpan> test File::Scan::ClamAV

  CPAN.pm: Going to build C/CF/CFABER/File-Scan-ClamAV-1.8.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for File::Scan::ClamAV
cp lib/File/Scan/ClamAV.pm blib/lib/File/Scan/ClamAV.pm
Manifying blib/man3/File::Scan::ClamAV.3pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00basic.........ok                                                         
t/01ping..........ERROR: Parse error at line 2: Option Foreground requires boolean argument.
ERROR: Can't open/parse the config file clamav.conf
t/01ping..........ok 1/3# Failed test 2 in t/01ping.t at line 26             
#  t/01ping.t line 26 is: ok($av->ping);
t/01ping..........FAILED test 2                                              
    Failed 1/3 tests, 66.67% okay
t/02reload........ERROR: Parse error at line 2: Option Foreground requires boolean argument.
LocalSocket /root/.cpan/build/File-Scan-ClamAV-1.8/clamsock
ERROR: Can't open/parse the config file clamav.conf
# Failed test 2 in t/02reload.t at line 25
#  t/02reload.t line 25 is: ok($av->reload);
t/02reload........FAILED test 2                                              
    Failed 1/3 tests, 66.67% okay
t/03quit..........ERROR: Parse error at line 2: Option Foreground requires boolean argument.
ERROR: Can't open/parse the config file clamav.conf
# Failed test 2 in t/03quit.t at line 31
#  t/03quit.t line 31 is: ok($av->quit);
t/03quit..........FAILED test 2                                              
    Failed 1/4 tests, 75.00% okay
t/04scan..........ERROR: Parse error at line 2: Option Foreground requires boolean argument.
ERROR: Can't open/parse the config file clamav.conf
t/04scan..........ok 1/8# Test 4 got: "" (t/04scan.t at line 36)             
t/04scan..........NOK 4#   Expected: "1" (Didn't detect /root/.cpan/build/File-Scan-ClamAV-1.8/testfiles/clamavtest)
#  t/04scan.t line 36 is: ok(exists($results{"$testdir/clamavtest"}), 1, "Didn't detect $testdir/clamavtest");
# Test 5 got: "" (t/04scan.t at line 37)
#   Expected: "1" (Didn't detect /root/.cpan/build/File-Scan-ClamAV-1.8/testfiles/clamavtest.zip)
#  t/04scan.t line 37 is: ok(exists($results{"$testdir/clamavtest.zip"}), 1, "Didn't detect $testdir/clamavtest.zip");
# Test 6 got: "" (t/04scan.t at line 38)
#   Expected: "1" (Didn't detect /root/.cpan/build/File-Scan-ClamAV-1.8/testfiles/clamavtest.gz)
#  t/04scan.t line 38 is: ok(exists($results{"$testdir/clamavtest.gz"}), 1, "Didn't detect $testdir/clamavtest.gz");
t/04scan..........FAILED tests 4-6                                           
    Failed 3/8 tests, 62.50% okay
t/05rawscan.......ERROR: Parse error at line 2: Option Foreground requires boolean argument.
ERROR: Can't open/parse the config file clamav.conf
t/05rawscan.......NOK 4# Test 4 got: "" (t/05rawscan.t at line 34)           
#   Expected: "1" (Didn't detect /root/.cpan/build/File-Scan-ClamAV-1.8/testfiles/clamavtest)
#  t/05rawscan.t line 34 is: ok(exists($results{"$testdir/clamavtest"}), 1, "Didn't detect $testdir/clamavtest");
t/05rawscan.......FAILED test 4                                              
    Failed 1/8 tests, 87.50% okay
t/06streamscan....ERROR: Parse error at line 2: Option Foreground requires boolean argument.
ERROR: Can't open/parse the config file clamav.conf
t/06streamscan....ok 1/8# Test 5 got: <UNDEF> (t/06streamscan.t at line 43)  
#   Expected: "FOUND"
#  t/06streamscan.t line 43 is: ok($ans, 'FOUND');
t/06streamscan....NOK 5# Test 6 got: <UNDEF> (t/06streamscan.t at line 44)   
t/06streamscan....NOK 6#   Expected: "ClamAV-Test-Signature"                 
#  t/06streamscan.t line 44 is: ok($vir, 'ClamAV-Test-Signature');
t/06streamscan....FAILED tests 5-6                                           
    Failed 2/8 tests, 75.00% okay
Failed Test      Stat Wstat Total Fail  Failed  List of Failed


* * *


t/01ping.t                      3    1  33.33%  2
t/02reload.t                    3    1  33.33%  2
t/03quit.t                      4    1  25.00%  2
t/04scan.t                      8    3  37.50%  4-6
t/05rawscan.t                   8    1  12.50%  4
t/06streamscan.t                8    2  25.00%  5-6
Failed 6/7 test scripts, 14.29% okay. 9/35 subtests failed, 74.29% okay.
make: *** [test_dynamic] Error 255
  /usr/bin/make test -- NOT OK


 **cpan> look File::Scan::ClamAV**



Running look for module File::Scan::ClamAV

Trying to open a subshell in the build directory...
Working directory is /root/.cpan/build/File-Scan-ClamAV-1.8


**root@auslz02:~/.cpan/build/File-Scan-ClamAV-1.8# vi clamav.conf**

Change following...

LocalSocket /root/.cpan/build/File-Scan-ClamAV-1.8/clamsock
**Foreground**
MaxThreads 1
**ScanArchive**
ArchiveMaxFileSize 1M
ArchiveMaxRecursion 1
ArchiveMaxFiles 2

To following...

LocalSocket /root/.cpan/build/File-Scan-ClamAV-1.8/clamsock
**Foreground true**
MaxThreads 1
**ScanArchive true**
ArchiveMaxFileSize 1M
ArchiveMaxRecursion 1
ArchiveMaxFiles 2


**root@auslz02:~/.cpan/build/File-Scan-ClamAV-1.8# make install**



Installing /usr/local/share/perl/5.8.8/File/Scan/ClamAV.pm
Installing /usr/local/man/man3/File::Scan::ClamAV.3pm
Writing /usr/local/lib/perl/5.8.8/auto/File/Scan/ClamAV/.packlist
Appending installation info to /usr/local/lib/perl/5.8.8/perllocal.pod


**root@auslz02:~/.cpan/build/File-Scan-ClamAV-1.8# exit**
exit

**cpan> exit**
Terminal does not support GetHistory.
Lockfile removed.