Re: [Arsperl-users] Arsperl-users Digest, Vol 61, Issue 4:

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Thank you  much, you were correct.  Arsperl is working now.  I'm testing.

On Thu, Nov 15, 2012 at 2:31 AM, <Con...@t-...> wrote:

> **
> Hi Philip,
>
> I think this is your problem.
>
>
> Note (probably harmless): No library found for -licuucbmc
>
> Note (probably harmless): No library found for -licui18nbmc
>
> Note (probably harmless): No library found for -licudatabmc
> try to copy all the libicu* files from /tools/bmc/remedy/bin to
> /tools/bmc/remedy/api/lib
>
> Since 7.5 BMC does not include all necessary shared libraries into the
> api/lib folder.
>
> HTH
>
> KR Conny
>  ------------------------------
> *Von:* Philip Wilson [mailto:ph...@wi...]
> *Gesendet:* Donnerstag, 15. November 2012 05:23
> *An:* ars...@li...
> *Betreff:* Re: [Arsperl-users] Arsperl-users Digest, Vol 61, Issue 4
>
>  OK, I am back at it again.  I really need this to work.
>
> I've created my own 32bit perl installation with DBI and DBD.  Then I'm
> adding arsperl.
>
>  I cannot get arsperl to compile. Here are as many details as I could
> gather.
>
> Everything in my Solaris 2.10 environment is supposed to be 32 bit.
>
> $ perl -V  ( Could you compare this output to yours ? )
>
>
>
> Summary of my perl5 (revision 5 version 16 subversion 0) configuration:
>
> Platform:
>
> osname=solaris, osvers=2.10, archname=sun4-solaris
>
> uname='sunos prescs07 5.10 generic_147440-11 sun4u sparcsunw,sun-fire-v240 '
>
> config_args='-Dcc=gcc -des -Dprefix=/tools/perl'
>
> hint=previous, useposix=true, d_sigaction=define
>
> useithreads=undef, usemultiplicity=undef
>
> useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
>
> use64bitint=undef, use64bitall=undef, uselongdouble=undef
>
> usemymalloc=n, bincompat5005=undef
>
> Compiler:
>
> cc='gcc', ccflags ='-fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
>
> optimize='-O',
>
> cppflags='-fno-strict-aliasing -pipe -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV'
>
> ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)',
> gccosandvers='solaris2.10'
>
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
>
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
>
> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
>
> alignbytes=8, prototype=define
>
> Linker and Libraries:
>
> ld='gcc', ldflags =' '
>
> libpth=/usr/lib /usr/ccs/lib
>
> libs=-lsocket -lnsl -ldl -lm -lc
>
> perllibs=-lsocket -lnsl -ldl -lm -lc
>
> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
>
> gnulibc_version=''
>
> Dynamic Linking:
>
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
>
> cccdlflags='-fPIC', lddlflags='-G'
>
>  Characteristics of this binary (from libperl):
>
> Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
>
> PERL_MALLOC_WRAP PERL_PRESERVE_IVUV
>
> PERL_USE_SAFE_PUTENV USE_LARGE_FILES USE_LOCALE
>
> USE_LOCALE_COLLATE USE_LOCALE_CTYPE
>
> USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
>
> Built under solaris
>
> Compiled at Nov 14 2012 19:39:00
>
> @INC:
>
> /production/77j/perl32/lib/site_perl/5.16.0/sun4-solaris
>
> /production/77j/perl32/lib/site_perl/5.16.0
>
> /production/77j/perl32/lib/5.16.0/sun4-solaris
>
> /production/77j/perl32/lib/5.16.0
>
> .
>
> -----------------------------------
>
> $ env
>
> ARS=/tools/bmc/remedy
>
> PATH=/oracle/g01/software/client32/
> 9.2.0.8/bin:/production/77j/perl32/bin:/oracle/g01/software/client32/9.2.0.8/bin:/usr/bin::/usr/sbin:/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sfw/bin::/usr/sbin
> :
>
> SHELL=/usr/bin/ksh
>
>
> LD_LIBRARY_PATH=/production/77j/perl32/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS:/usr/local/lib:/usr/sfw/lib:/oracle/g01/software/client32/
> 9.2.0.8/lib:/tools/bmc/remedy/api/lib
>
> ORACLE_HOME=/oracle/g01/software/client32/9.2.0.8
>
> PWD=/production/77j/stage/ars/ARSperl-1.93
>
> -----------------
>
> Makefile.PL entries that are not commented:
>
>
>
> $ARSAPI = "/tools/bmc/remedy/api";
>
> $ARSVERSION = 7.6;
>
> $ARCHITECTURE = "";
>
> $ENCRYPT = 0;
>
> -------------------------------
>
> Here is the compile and test:
>
> $ /production/77j/perl32/bin/perl Makefile.PL
>
> Building against perl 5.016000
>
> Generating support.h file..
>
> Processing AR_STRUCT_ITEM codes..
>
> Processing AR_SERVER_STAT codes..
>
> Processing AR_SCHEMA codes..
>
> Processing AR_COM_PARM codes..
>
> Processing AR_COM_METHOD codes..
>
> Processing AR_DDE codes..
>
> Processing AR_ACTIVE_LINK_ACTION codes..
>
> Processing AR_ACTIVE_LINK_ACTION_OPEN codes..
>
> Processing AR_CHAR_MENU_DD type codes..
>
> Processing AR_CHAR_MENU_DD name codes..
>
> Processing AR_CHAR_MENU_DD value format..
>
> Processing AR_CHAR_MENU codes..
>
> Processing AR_FILTER_ACTION codes..
>
> Processing AR_MENU_REFRESH codes..
>
> Processing AR_PERMISSIONS (Schema) codes..
>
> Processing AR_PERMISSIONS (Field) codes..
>
> Processing AR_DATA_TYPE codes..
>
> Processing AR_BYTE_LIST codes..
>
> Processing AR_NO_MATCH codes..
>
> Processing AR_MULTI_MATCH codes..
>
> Processing AR_RETURN codes..
>
> Processing AR_FUNCTION codes..
>
> Processing ARCON codes..
>
> Processing ARCONOWNER codes..
>
> Processing ARREF codes..
>
> Processing AR_KEYWORD codes..
>
> Processing AR_SERVER_INFO codes..
>
> Processing AR_SIGNAL codes..
>
> Generating serverTypeInfoHints.h ..
>
> Converting C header files to perl modules ..
>
> Configuring with options:
>
> ARSVERSION = 7.60
>
> ARSAPI = /tools/bmc/remedy/api
>
> AUTODEFINES = -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16
> -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50
>
> Note (probably harmless): No library found for -licuucbmc
>
> Note (probably harmless): No library found for -licui18nbmc
>
> Note (probably harmless): No library found for -licudatabmc
>
> Writing Makefile for ARS
>
> Writing MYMETA.yml and MYMETA.json
>
> === ARSperl 'make test' configuration. ===
>
> Please enter the following information. This information will be
>
> recorded in ./t/config.cache
>
> If you want to skip the 'make test' step, just hit ENTER
>
> three times. You can configure it later by either re-running
>
> 'perl Makefile.PL' or by editting ./t/config.cache
>
> Fair warning: you probably don't want to run 'make test' against a
>
> production ARSystem server.
>
> Server Name []:
>
> Admin Username []:
>
> Admin Password []:
>
> TCP Port [0]:
>
> Type 'make' (windows: 'nmake') to build ARSperl.
>
> Type 'make test' to test ARSperl before installing.
>
> Type 'make install' to install ARSperl.
>
> $ make
>
> cp ARS/arerrno-h.pm blib/lib/ARS/arerrno-h.pm
>
> Skip blib/lib/ARS/OOsup.pm (unchanged)
>
> cp ARS/ar-h.pm blib/lib/ARS/ar-h.pm
>
> Skip blib/lib/ARS/nparm.pm (unchanged)
>
> Skip blib/lib/ARS/OOmsgs.pm (unchanged)
>
> Skip blib/lib/ARS/OOform.pm (unchanged)
>
> cp ARS.pm blib/lib/ARS.pm
>
> AutoSplitting blib/lib/ARS.pm (blib/lib/auto/ARS)
>
> /production/77j/perl32/bin/perl /production/77j/perl32/lib/5.16.0/ExtUtils
> /xsubpp -typemap /production/77j/perl32/lib/5.16.0/ExtUtils/typemap -
> typemap typemap ARS.xs > ARS.xsc && mv ARS.xsc ARS.c
>
> gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O
> -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE"
> -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16
> -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 ARS.c
>
> ARS.c: In function `XS_ARS_ars_GetListContainer':
>
> ARS.xs:1197: warning: 'ret' might be used uninitialized in this function
>
> gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O
> -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE"
> -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16
> -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 support.c
>
> gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O
> -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE"
> -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16
> -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev.c
>
> gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O
> -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC"-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE"
> -g -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16
> -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev_generated.c
>
> Running Mkbootstrap for ARS ()
>
> chmod 644 ARS.bs
>
> rm -f blib/arch/auto/ARS/ARS.so
>
> LD_RUN_PATH="/usr/lib" gcc -G ARS.o support.o supportrev.o
> supportrev_generated.o -o blib/arch/auto/ARS/ARS.so /tools/bmc/remedy/api
> /lib/libar.a \
>
> -L/tools/bmc/remedy/api/lib -lnsl -lpthread \
>
> chmod 755 blib/arch/auto/ARS/ARS.so
>
> cp ARS.bs blib/arch/auto/ARS/ARS.bs
>
> chmod 644 blib/arch/auto/ARS/ARS.bs
>
>
>
>
>
> $ make test
>
> PERL_DL_NONLAZY=1 /production/77j/perl32/bin/perl "-MExtUtils::Command::MM"
> "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
>
> t/00connect.t ........... Can't load
> '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for
> module ARS: ld.so.1: perl: fatal: relocation error: file
> /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol
> ucnv_setDefaultName_3_2: referenced symbol not found at
> /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190.
>
> at t/00connect.t line 12.
>
> Compilation failed in require at t/00connect.t line 12.
>
> BEGIN failed--compilation aborted at t/00connect.t line 12.
>
> t/00connect.t ........... Dubious, test returned 255 (wstat 65280, 0xff00)
>
> No subtests run
>
> t/01import.t ............ Can't load
> '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for
> module ARS: ld.so.1: perl: fatal: relocation error: file
> /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol
> ucnv_setDefaultName_3_2: referenced symbol not found at
> /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190.
>
> at t/01import.t line 7.
>
> Compilation failed in require at t/01import.t line 7.
>
> BEGIN failed--compilation aborted at t/01import.t line 7.
>
> t/01import.t ............ Dubious, test returned 255 (wstat 65280, 0xff00)
>
> No subtests run
>
> t/02export.t ............ ^C$
>
> ------------------------------------------------
>
> Any ideas?
>
>
>
>
>
> ------------------------------------------------------------------------------
> Monitor your physical, virtual and cloud infrastructure from a single
> web console. Get in-depth insight into apps, servers, databases, vmware,
> SAP, cloud infrastructure, etc. Download 30-day Free Trial.
> Pricing starts from $795 for 25 servers or applications!
> http://p.sf.net/sfu/zoho_dev2dev_nov
>
>
> --
> Arsperl-users mailing list
> Ars...@li...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>