Re: [Arsperl-users] arsperl on Solaris 10 with ARS 6.3

[Bowman, B. A <Bow...@st...>]

I discovered my mistake.
=20
When compiling perl, I used an old source that I had used on an HPUX =
machine.  in HPUX I had to compile ARSperl into perl statically so it =
was in the library tree of the perl source.  When I did the new Solaris =
install, I did not get all of the older arsperl stuff out.  I cleaned it =
out now and am re-compiling perl.  I hopes this helps anyone else whoe =
stumbles onto this.
=20
Brent Bowman

-----Original Message-----
From: ars...@ar... =
[mailto:ars...@ar...]On Behalf Of Bowman, Brent A
Sent: Thursday, July 13, 2006 4:08 PM
To: ars...@ar...
Subject: [Arsperl-users] arsperl on Solaris 10 with ARS 6.3


Hello all, I've been installing arsperl on a new Sun Solaris 2.10 =
system. =20
=20
I used the package arsperl 1.85 (I hope this is the stable version that =
works with ARS 6.3) which I got off of CPAN.
=20
Everything compiled and installed without a hitch, when I actually ran =
it, however, I got the folowing error:
=20
----- Begin Paste  ----
=20
user@server:# perl
use ARS;
ARS object version 1.84 does not match bootstrap parameter 1.8002 at =
/opt/perl5/lib/5.8.2/sun4-solaris/DynaLoader.pm line 249.
Compilation failed in require at - line 1.
BEGIN failed--compilation aborted at - line 1.
user@server:#
=20
--- End Paste  ---
=20
I noticed that in the downloaded package, the ARS.pm file has the line :
=20
$ARS::VERSION   =3D '1.84';

I couldn't find any files with 1.8002 in them so I'm not sure where that =
came from.  Unless it got mixed up with my version of perl.
=20
here is perl -V
=20
----- Begin Paste -------
=20
user@server:# perl -V
Summary of my perl5 (revision 5.0 version 8 subversion 2) configuration:
  Platform:
    osname=3Dsolaris, osvers=3D2.10, archname=3Dsun4-solaris
    uname=3D'sunos iemsdev1 5.10 generic_118822-25 sun4u sparc =
sunw,ultra-250 '
    config_args=3D''
    hint=3Drecommended, useposix=3Dtrue, d_sigaction=3Ddefine
    usethreads=3Dundef use5005threads=3Dundef useithreads=3Dundef =
usemultiplicity=3Dundef
    useperlio=3Ddefine d_sfio=3Dundef uselargefiles=3Ddefine =
usesocks=3Dundef
    use64bitint=3Dundef use64bitall=3Dundef uselongdouble=3Dundef
    usemymalloc=3Dn, bincompat5005=3Dundef
  Compiler:
    cc=3D'cc', ccflags =3D'-fno-strict-aliasing -I/usr/local/include =
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=3D64',
    optimize=3D'-O',
    cppflags=3D'-fno-strict-aliasing -I/usr/local/include'
    ccversion=3D'', gccversion=3D'3.4.3 =
(csl-sol210-3_4-branch+sol_rpath)', gccosandvers=3D'solaris2.10'
    intsize=3D4, longsize=3D4, ptrsize=3D4, doublesize=3D8, =
byteorder=3D4321
    d_longlong=3Ddefine, longlongsize=3D8, d_longdbl=3Ddefine, =
longdblsize=3D16
    ivtype=3D'long', ivsize=3D4, nvtype=3D'double', nvsize=3D8, =
Off_t=3D'off_t', lseeksize=3D8
    alignbytes=3D8, prototype=3Ddefine
  Linker and Libraries:
    ld=3D'cc', ldflags =3D' -L/usr/local/lib '
    libpth=3D/usr/sfw/lib /usr/local/lib /usr/lib /usr/ccs/lib
    libs=3D-lsocket -lnsl -ldl -lm -lc
    perllibs=3D-lsocket -lnsl -ldl -lm -lc
    libc=3D/lib/libc.so, so=3Dso, useshrplib=3Dfalse, =
libperl=3Dlibperl.a
    gnulibc_version=3D''
  Dynamic Linking:
    dlsrc=3Ddl_dlopen.xs, dlext=3Dso, d_dlsymun=3Dundef, ccdlflags=3D' '
    cccdlflags=3D'-fPIC', lddlflags=3D'-G -L/usr/local/lib'
=20

Characteristics of this binary (from libperl):
  Compile-time options: USE_LARGE_FILES
  Built under solaris
  Compiled at Jul 11 2006 11:58:30
  @INC:
    /opt/perl5/lib/5.8.2/sun4-solaris
    /opt/perl5/lib/5.8.2
    /opt/perl5/lib/site_perl/5.8.2/sun4-solaris
    /opt/perl5/lib/site_perl/5.8.2
    /opt/perl5/lib/site_perl
    .
user@server:#

--- End Paste  ---
=20
So which version of arsperl is this 1.85?, 1.84? or 1.8002?
=20
I was thinking I could just change the value in ARS.pm, but that doesn't =
explain how I can fix the 1.8002 issue.
=20
Any insight would be appreciated.
=20
Thanks,
=20
Brent
=20
=20