RE: [Arsperl-users] Install problems 1.83 on Solaris 8...

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Misi,
I saw something in a previous message:
> # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
> total 0

This tells me that the directory already exists.  I checked on my system =
and could not get the .ix file to be generated when the directory =
existed either.  I did a 'make clean' followed by 'perl Makefile.PL' =
and, finally, by 'make'.  The file then showed up.

I hope this helps,
Mark Vaughan

Programmer III

=20

Direct: +1 303 802 2426

Cell: +1 303 601 4434

Fax: +1 303 802 1420

mar...@ev...

Evolving Systems, Inc.=20

9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112

www.evolving.com

-----Original Message-----
From: ars...@ar... =
[mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
Sent: Friday, April 15, 2005 1:10 AM
To: ars...@ar...
Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...

Hi Mark,

The command you suggested created the autosplit.ix. Is there some =
problem
in my Makefile!?

"make test" was more successfull, and I got it to work.

The "make install" did only copy the autosplit.ix, and I had to manually
copy the following files to
/usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris/:
_h2ph_pre.ph
ARS.pm
ARSar-h.pm
ARSarerrno-h.pm
ARSnparm.pm
ARSnt-h.pm
ARSnterrno-h.pm
ARSOOform.pm
ARSOOmsgs.pm
ARSOOsup.pm

        Best Regards - Misi, RRR AB, http://www.rrr.se

> It doesn't appear to be running the autosplit correctly.
>
> Does the file show up if you do (from the ARSperl-1.83 dir):
> perl -e 'use AutoSplit;autosplit("ARS.pm","blib/lib/auto",0,1,1)'
>
> If this command works correctly you should see:
> AutoSplitting ARS.pm (blib/lib/auto/ARS)
>
> and the file blib/lib/auto/ARS/autosplit.ix should now exist.
> This should remove that 'make test' error about autosplit.ix
>
> Mark
>
> Mark Vaughan
>
> Programmer III
>
>
>
> Direct: +1 303 802 2426
>
> Cell: +1 303 601 4434
>
> Fax: +1 303 802 1420
>
> mar...@ev...
>
> Evolving Systems, Inc.
>
> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>
> www.evolving.com
>
>
> -----Original Message-----
> From: ars...@ar...
> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
> Sent: Thursday, April 14, 2005 12:48 PM
> To: ars...@ar...
> Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
>
> Hi Mark and Jeff,
>
> I am trying to compile against the 6.3 API.
>
> I see no errors when doing a make (after getting all the packages =
right
> anyhow...).
>
> This is the complete output from "make":
>
> # make
> cp artypes.ph blib/lib/artypes.ph
> /usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp  =
-typemap
> /usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap  ARS.xs >
> ARS.xsc && mv ARS.xsc ARS.c
> gcc -B/usr/ccs/bin/ -c  -I/opt/arsystem/api/include =
-fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE =
-D_FILE_OFFSET_BITS=3D64 -O
> -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE"  -g  -DARS32  =
-DARS452
> -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 =
-DPERL_BASEREV_IS=3D50  ARS.c
> gcc -B/usr/ccs/bin/ -c  -I/opt/arsystem/api/include =
-fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE =
-D_FILE_OFFSET_BITS=3D64 -O
> -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE"  -g  -DARS32  =
-DARS452
> -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 =
-DPERL_BASEREV_IS=3D50
> support.c
> gcc -B/usr/ccs/bin/ -c  -I/opt/arsystem/api/include =
-fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE =
-D_FILE_OFFSET_BITS=3D64 -O
> -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE"  -g  -DARS32  =
-DARS452
> -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 =
-DPERL_BASEREV_IS=3D50
> supportrev.c
> Running Mkbootstrap for ARS ()
> chmod 644 ARS.bs
> rm -f blib/arch/auto/ARS/ARS.so
> LD_RUN_PATH=3D"/usr/lib" gcc -B/usr/ccs/bin/  -G -L/usr/local/lib =
ARS.o
> support.o supportrev.o /opt/arsystem/api/lib/libar.a  -o
> blib/arch/auto/ARS/ARS.so   -L/opt/arsystem/api/lib -lpthread
> chmod 755 blib/arch/auto/ARS/ARS.so
> cp ARS.bs blib/arch/auto/ARS/ARS.bs
> chmod 644 blib/arch/auto/ARS/ARS.bs
> # pwd
> /data/urbekl/ARSperl-1.83
> # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
> total 0
> #
>
>         Thanks - Misi, RRR AB, http://www.rrr.se
>
>> Misi,
>> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but =
I'm
>> using Perl 5.6.1, but it shouldn't matter.
>>
>> Did the 'make complete okay?  It should have put the autosplit.ix =
file
>> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS.
>> Are you running the 'make test' from your install directory =
(presumably
>> '/data/urbekl/ARSperl-1.83')?
>> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when =
I
>> did not define ARTCPPORT to that matching the AR Server.
>>
>> I hope this helps,
>> Mark
>>
>> Mark Vaughan
>>
>> Programmer III
>>
>>
>>
>> Direct: +1 303 802 2426
>>
>> Cell: +1 303 601 4434
>>
>> Fax: +1 303 802 1420
>>
>> mar...@ev...
>>
>> Evolving Systems, Inc.
>>
>> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>>
>> www.evolving.com
>>
>> -----Original Message-----
>> From: ars...@ar...
>> [mailto:ars...@ar...] On Behalf Of Misi =
Mladoniczky
>> Sent: Thursday, April 14, 2005 12:03 PM
>> To: ars...@ar...
>> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8...
>>
>> Hi,
>>
>> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83
>> and
>> ARAPI version 6.3.
>>
>> "make test" gives me a lot of errors, but I did a "make install" =
anyway.
>> This is what happens when i try to use ARS:
>> # perl
>> use ARS;
>> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains:
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl =
.)
>> at
>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>>  at ARS.pm line 64
>>
>> This is some of the output from "make test":
>> # make test
>> ...
>> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC
>> contains: /data/urbekl/ARSperl-1.83/blib/lib
>> /data/urbekl/ARSperl-1.83/blib/arch
>> /usr/local/lib/perl5/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl =
.)
>> at
>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>>  at ARS.pm line 64
>> t/10getlist..........NOK 2#     Failed test (t/10getlist.t at line =
20)
>> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode
>> arguments) (ARERR #91)
>> t/10getlist..........NOK 4#     Failed test (t/10getlist.t at line =
28)
>> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode
>> arguments)
>> (ARERR #91)
>> t/10getlist..........NOK 6#     Failed test (t/10getlist.t at line =
36)
>> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments)
>> (ARERR #91)
>> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9.
>> t/10getlist..........dubious
>>         Test returned status 3 (wstat 768, 0x300)
>> DIED. FAILED tests 2, 4, 6
>>         Failed 3/9 tests, 66.67% okay
>> ...
>> Failed Test        Stat Wstat Total Fail  Failed  List of Failed
>> =
------------------------------------------------------------------------
>> -------
>> t/02export.t          0   139    ??   ??       %  ??
>> t/10alink.t           0   139    ??   ??       %  ??
>> t/10entry.t          22  5632    10   18 180.00%  2-10
>> t/10getlist.t         3   768     9    3  33.33%  2 4 6
>> t/12lotsoffields.t              104  102  98.08%  3-104
>> t/13join.t                        7    5  71.43%  3-7
>> t/20merge.t                       5    2  40.00%  4 6
>> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, =
22.73%
>> okay.
>> make: *** [test_dynamic] Error 29
>> #
>>
>> These are the system specific things i installed prior to arsperl:
>> binutils-2.11.2-sol8-sparc-local
>> gcc_small-3.4.2-sol8-sparc-local
>> libiconv-1.8-sol8-sparc-local
>> make-3.80-sol8-sparc-local
>> perl-5.8.5-sol8-sparc-local
>> SUNWarc
>> SUNWhea
>> SUNWlibm
>>
>>         Best Regards - Misi, RRR AB, http://www.rrr.se
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real =
users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real =
users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_ide95&alloc_id 396&op=CCk
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real =
users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real =
users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id 396&op=CCk
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
_______________________________________________
Arsperl-users mailing list
Ars...@ar...
https://lists.sourceforge.net/lists/listinfo/arsperl-users