Thread: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
Brought to you by:
jeffmurphy
Menu
▾
▴
arsperl-users
|
From: Mark V. <mva...@ev...> - 2005-04-14 18:27:35
|
Misi, I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but I'm using Perl 5.6.1, but it shouldn't matter. Did the 'make complete okay? It should have put the autosplit.ix file in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS. Are you running the 'make test' from your install directory (presumably '/data/urbekl/ARSperl-1.83')? I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when I did not define ARTCPPORT to that matching the AR Server. I hope this helps, Mark Mark Vaughan Programmer III =20 Direct: +1 303 802 2426 Cell: +1 303 601 4434 Fax: +1 303 802 1420 mar...@ev... Evolving Systems, Inc.=20 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112 www.evolving.com -----Original Message----- From: ars...@ar... [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky Sent: Thursday, April 14, 2005 12:03 PM To: ars...@ar... Subject: [Arsperl-users] Install problems 1.83 on Solaris 8... Hi, I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83 and ARAPI version 6.3. "make test" gives me a lot of errors, but I did a "make install" anyway. This is what happens when i try to use ARS: # perl use ARS; Can't locate auto/ARS/autosplit.ix in @INC (@INC contains: /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .) at /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160. at ARS.pm line 64 This is some of the output from "make test": # make test ... t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC contains: /data/urbekl/ARSperl-1.83/blib/lib /data/urbekl/ARSperl-1.83/blib/arch /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .) at /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160. at ARS.pm line 64 t/10getlist..........NOK 2# Failed test (t/10getlist.t at line 20) # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode arguments) (ARERR #91) t/10getlist..........NOK 4# Failed test (t/10getlist.t at line 28) # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode arguments) (ARERR #91) t/10getlist..........NOK 6# Failed test (t/10getlist.t at line 36) # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments) (ARERR #91) t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9. t/10getlist..........dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 2, 4, 6 Failed 3/9 tests, 66.67% okay ... Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------ ------- t/02export.t 0 139 ?? ?? % ?? t/10alink.t 0 139 ?? ?? % ?? t/10entry.t 22 5632 10 18 180.00% 2-10 t/10getlist.t 3 768 9 3 33.33% 2 4 6 t/12lotsoffields.t 104 102 98.08% 3-104 t/13join.t 7 5 71.43% 3-7 t/20merge.t 5 2 40.00% 4 6 Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, 22.73% okay. make: *** [test_dynamic] Error 29 # These are the system specific things i installed prior to arsperl: binutils-2.11.2-sol8-sparc-local gcc_small-3.4.2-sol8-sparc-local libiconv-1.8-sol8-sparc-local make-3.80-sol8-sparc-local perl-5.8.5-sol8-sparc-local SUNWarc SUNWhea SUNWlibm Best Regards - Misi, RRR AB, http://www.rrr.se ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick _______________________________________________ Arsperl-users mailing list Ars...@ar... https://lists.sourceforge.net/lists/listinfo/arsperl-users |
|
From: Mark V. <mva...@ev...> - 2005-04-14 20:20:37
|
It doesn't appear to be running the autosplit correctly.
Does the file show up if you do (from the ARSperl-1.83 dir):
perl -e 'use AutoSplit;autosplit("ARS.pm","blib/lib/auto",0,1,1)'
If this command works correctly you should see:
AutoSplitting ARS.pm (blib/lib/auto/ARS)
and the file blib/lib/auto/ARS/autosplit.ix should now exist.
This should remove that 'make test' error about autosplit.ix
Mark
Mark Vaughan
Programmer III
=20
Direct: +1 303 802 2426
Cell: +1 303 601 4434
Fax: +1 303 802 1420
mar...@ev...
Evolving Systems, Inc.=20
9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
www.evolving.com
-----Original Message-----
From: ars...@ar... =
[mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
Sent: Thursday, April 14, 2005 12:48 PM
To: ars...@ar...
Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
Hi Mark and Jeff,
I am trying to compile against the 6.3 API.
I see no errors when doing a make (after getting all the packages right
anyhow...).
This is the complete output from "make":
# make
cp artypes.ph blib/lib/artypes.ph
/usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap ARS.xs >
ARS.xsc && mv ARS.xsc ARS.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=3D64 =
-O =20
-DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452=20
-DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 -DPERL_BASEREV_IS=3D50 =
ARS.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=3D64 =
-O =20
-DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452=20
-DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 -DPERL_BASEREV_IS=3D50 =
support.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=3D64 =
-O =20
-DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452=20
-DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 -DPERL_BASEREV_IS=3D50 =
supportrev.c
Running Mkbootstrap for ARS ()
chmod 644 ARS.bs
rm -f blib/arch/auto/ARS/ARS.so
LD_RUN_PATH=3D"/usr/lib" gcc -B/usr/ccs/bin/ -G -L/usr/local/lib ARS.o
support.o supportrev.o /opt/arsystem/api/lib/libar.a -o
blib/arch/auto/ARS/ARS.so -L/opt/arsystem/api/lib -lpthread
chmod 755 blib/arch/auto/ARS/ARS.so
cp ARS.bs blib/arch/auto/ARS/ARS.bs
chmod 644 blib/arch/auto/ARS/ARS.bs
# pwd
/data/urbekl/ARSperl-1.83
# ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
total 0
#
Thanks - Misi, RRR AB, http://www.rrr.se
> Misi,
> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but =
I'm
> using Perl 5.6.1, but it shouldn't matter.
>
> Did the 'make complete okay? It should have put the autosplit.ix file
> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS.
> Are you running the 'make test' from your install directory =
(presumably
> '/data/urbekl/ARSperl-1.83')?
> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when I
> did not define ARTCPPORT to that matching the AR Server.
>
> I hope this helps,
> Mark
>
> Mark Vaughan
>
> Programmer III
>
>
>
> Direct: +1 303 802 2426
>
> Cell: +1 303 601 4434
>
> Fax: +1 303 802 1420
>
> mar...@ev...
>
> Evolving Systems, Inc.
>
> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>
> www.evolving.com
>
> -----Original Message-----
> From: ars...@ar...
> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
> Sent: Thursday, April 14, 2005 12:03 PM
> To: ars...@ar...
> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8...
>
> Hi,
>
> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83
> and
> ARAPI version 6.3.
>
> "make test" gives me a lot of errors, but I did a "make install" =
anyway.
> This is what happens when i try to use ARS:
> # perl
> use ARS;
> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains:
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
> at
> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
> at ARS.pm line 64
>
> This is some of the output from "make test":
> # make test
> ...
> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC
> contains: /data/urbekl/ARSperl-1.83/blib/lib
> /data/urbekl/ARSperl-1.83/blib/arch
> /usr/local/lib/perl5/5.8.5/sun4-solaris
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
> at
> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
> at ARS.pm line 64
> t/10getlist..........NOK 2# Failed test (t/10getlist.t at line 20)
> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode
> arguments) (ARERR #91)
> t/10getlist..........NOK 4# Failed test (t/10getlist.t at line 28)
> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode
> arguments)
> (ARERR #91)
> t/10getlist..........NOK 6# Failed test (t/10getlist.t at line 36)
> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments)
> (ARERR #91)
> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9.
> t/10getlist..........dubious
> Test returned status 3 (wstat 768, 0x300)
> DIED. FAILED tests 2, 4, 6
> Failed 3/9 tests, 66.67% okay
> ...
> Failed Test Stat Wstat Total Fail Failed List of Failed
> =
------------------------------------------------------------------------
> -------
> t/02export.t 0 139 ?? ?? % ??
> t/10alink.t 0 139 ?? ?? % ??
> t/10entry.t 22 5632 10 18 180.00% 2-10
> t/10getlist.t 3 768 9 3 33.33% 2 4 6
> t/12lotsoffields.t 104 102 98.08% 3-104
> t/13join.t 7 5 71.43% 3-7
> t/20merge.t 5 2 40.00% 4 6
> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, 22.73%
> okay.
> make: *** [test_dynamic] Error 29
> #
>
> These are the system specific things i installed prior to arsperl:
> binutils-2.11.2-sol8-sparc-local
> gcc_small-3.4.2-sol8-sparc-local
> libiconv-1.8-sol8-sparc-local
> make-3.80-sol8-sparc-local
> perl-5.8.5-sol8-sparc-local
> SUNWarc
> SUNWhea
> SUNWlibm
>
> Best Regards - Misi, RRR AB, http://www.rrr.se
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real =
users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real =
users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id=14396&op=CCk
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
_______________________________________________
Arsperl-users mailing list
Ars...@ar...
https://lists.sourceforge.net/lists/listinfo/arsperl-users
|
|
From: Misi M. <mi...@rr...> - 2005-04-15 07:14:37
|
Hi Mark,
The command you suggested created the autosplit.ix. Is there some problem
in my Makefile!?
"make test" was more successfull, and I got it to work.
The "make install" did only copy the autosplit.ix, and I had to manually
copy the following files to
/usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris/:
_h2ph_pre.ph
ARS.pm
ARSar-h.pm
ARSarerrno-h.pm
ARSnparm.pm
ARSnt-h.pm
ARSnterrno-h.pm
ARSOOform.pm
ARSOOmsgs.pm
ARSOOsup.pm
Best Regards - Misi, RRR AB, http://www.rrr.se
> It doesn't appear to be running the autosplit correctly.
>
> Does the file show up if you do (from the ARSperl-1.83 dir):
> perl -e 'use AutoSplit;autosplit("ARS.pm","blib/lib/auto",0,1,1)'
>
> If this command works correctly you should see:
> AutoSplitting ARS.pm (blib/lib/auto/ARS)
>
> and the file blib/lib/auto/ARS/autosplit.ix should now exist.
> This should remove that 'make test' error about autosplit.ix
>
> Mark
>
> Mark Vaughan
>
> Programmer III
>
>
>
> Direct: +1 303 802 2426
>
> Cell: +1 303 601 4434
>
> Fax: +1 303 802 1420
>
> mar...@ev...
>
> Evolving Systems, Inc.
>
> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>
> www.evolving.com
>
>
> -----Original Message-----
> From: ars...@ar...
> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
> Sent: Thursday, April 14, 2005 12:48 PM
> To: ars...@ar...
> Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
>
> Hi Mark and Jeff,
>
> I am trying to compile against the 6.3 API.
>
> I see no errors when doing a make (after getting all the packages right
> anyhow...).
>
> This is the complete output from "make":
>
> # make
> cp artypes.ph blib/lib/artypes.ph
> /usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp -typemap
> /usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap ARS.xs >
> ARS.xsc && mv ARS.xsc ARS.c
> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50 ARS.c
> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
> support.c
> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
> supportrev.c
> Running Mkbootstrap for ARS ()
> chmod 644 ARS.bs
> rm -f blib/arch/auto/ARS/ARS.so
> LD_RUN_PATH="/usr/lib" gcc -B/usr/ccs/bin/ -G -L/usr/local/lib ARS.o
> support.o supportrev.o /opt/arsystem/api/lib/libar.a -o
> blib/arch/auto/ARS/ARS.so -L/opt/arsystem/api/lib -lpthread
> chmod 755 blib/arch/auto/ARS/ARS.so
> cp ARS.bs blib/arch/auto/ARS/ARS.bs
> chmod 644 blib/arch/auto/ARS/ARS.bs
> # pwd
> /data/urbekl/ARSperl-1.83
> # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
> total 0
> #
>
> Thanks - Misi, RRR AB, http://www.rrr.se
>
>> Misi,
>> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but I'm
>> using Perl 5.6.1, but it shouldn't matter.
>>
>> Did the 'make complete okay? It should have put the autosplit.ix file
>> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS.
>> Are you running the 'make test' from your install directory (presumably
>> '/data/urbekl/ARSperl-1.83')?
>> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when I
>> did not define ARTCPPORT to that matching the AR Server.
>>
>> I hope this helps,
>> Mark
>>
>> Mark Vaughan
>>
>> Programmer III
>>
>>
>>
>> Direct: +1 303 802 2426
>>
>> Cell: +1 303 601 4434
>>
>> Fax: +1 303 802 1420
>>
>> mar...@ev...
>>
>> Evolving Systems, Inc.
>>
>> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>>
>> www.evolving.com
>>
>> -----Original Message-----
>> From: ars...@ar...
>> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
>> Sent: Thursday, April 14, 2005 12:03 PM
>> To: ars...@ar...
>> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8...
>>
>> Hi,
>>
>> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83
>> and
>> ARAPI version 6.3.
>>
>> "make test" gives me a lot of errors, but I did a "make install" anyway.
>> This is what happens when i try to use ARS:
>> # perl
>> use ARS;
>> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains:
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
>> at
>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>> at ARS.pm line 64
>>
>> This is some of the output from "make test":
>> # make test
>> ...
>> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC
>> contains: /data/urbekl/ARSperl-1.83/blib/lib
>> /data/urbekl/ARSperl-1.83/blib/arch
>> /usr/local/lib/perl5/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .
>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
>> at
>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>> at ARS.pm line 64
>> t/10getlist..........NOK 2# Failed test (t/10getlist.t at line 20)
>> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode
>> arguments) (ARERR #91)
>> t/10getlist..........NOK 4# Failed test (t/10getlist.t at line 28)
>> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode
>> arguments)
>> (ARERR #91)
>> t/10getlist..........NOK 6# Failed test (t/10getlist.t at line 36)
>> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments)
>> (ARERR #91)
>> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9.
>> t/10getlist..........dubious
>> Test returned status 3 (wstat 768, 0x300)
>> DIED. FAILED tests 2, 4, 6
>> Failed 3/9 tests, 66.67% okay
>> ...
>> Failed Test Stat Wstat Total Fail Failed List of Failed
>> ------------------------------------------------------------------------
>> -------
>> t/02export.t 0 139 ?? ?? % ??
>> t/10alink.t 0 139 ?? ?? % ??
>> t/10entry.t 22 5632 10 18 180.00% 2-10
>> t/10getlist.t 3 768 9 3 33.33% 2 4 6
>> t/12lotsoffields.t 104 102 98.08% 3-104
>> t/13join.t 7 5 71.43% 3-7
>> t/20merge.t 5 2 40.00% 4 6
>> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, 22.73%
>> okay.
>> make: *** [test_dynamic] Error 29
>> #
>>
>> These are the system specific things i installed prior to arsperl:
>> binutils-2.11.2-sol8-sparc-local
>> gcc_small-3.4.2-sol8-sparc-local
>> libiconv-1.8-sol8-sparc-local
>> make-3.80-sol8-sparc-local
>> perl-5.8.5-sol8-sparc-local
>> SUNWarc
>> SUNWhea
>> SUNWlibm
>>
>> Best Regards - Misi, RRR AB, http://www.rrr.se
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_ide95&alloc_id 396&opÌk
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id 396&opÌk
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
|
|
From: Mark V. <mva...@ev...> - 2005-04-15 14:29:38
|
Misi, I saw something in a previous message: > # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS > total 0 This tells me that the directory already exists. I checked on my system = and could not get the .ix file to be generated when the directory = existed either. I did a 'make clean' followed by 'perl Makefile.PL' = and, finally, by 'make'. The file then showed up. I hope this helps, Mark Vaughan Programmer III =20 Direct: +1 303 802 2426 Cell: +1 303 601 4434 Fax: +1 303 802 1420 mar...@ev... Evolving Systems, Inc.=20 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112 www.evolving.com -----Original Message----- From: ars...@ar... = [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky Sent: Friday, April 15, 2005 1:10 AM To: ars...@ar... Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8... Hi Mark, The command you suggested created the autosplit.ix. Is there some = problem in my Makefile!? "make test" was more successfull, and I got it to work. The "make install" did only copy the autosplit.ix, and I had to manually copy the following files to /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris/: _h2ph_pre.ph ARS.pm ARSar-h.pm ARSarerrno-h.pm ARSnparm.pm ARSnt-h.pm ARSnterrno-h.pm ARSOOform.pm ARSOOmsgs.pm ARSOOsup.pm Best Regards - Misi, RRR AB, http://www.rrr.se > It doesn't appear to be running the autosplit correctly. > > Does the file show up if you do (from the ARSperl-1.83 dir): > perl -e 'use AutoSplit;autosplit("ARS.pm","blib/lib/auto",0,1,1)' > > If this command works correctly you should see: > AutoSplitting ARS.pm (blib/lib/auto/ARS) > > and the file blib/lib/auto/ARS/autosplit.ix should now exist. > This should remove that 'make test' error about autosplit.ix > > Mark > > Mark Vaughan > > Programmer III > > > > Direct: +1 303 802 2426 > > Cell: +1 303 601 4434 > > Fax: +1 303 802 1420 > > mar...@ev... > > Evolving Systems, Inc. > > 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112 > > www.evolving.com > > > -----Original Message----- > From: ars...@ar... > [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky > Sent: Thursday, April 14, 2005 12:48 PM > To: ars...@ar... > Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8... > > Hi Mark and Jeff, > > I am trying to compile against the 6.3 API. > > I see no errors when doing a make (after getting all the packages = right > anyhow...). > > This is the complete output from "make": > > # make > cp artypes.ph blib/lib/artypes.ph > /usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp = -typemap > /usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap ARS.xs > > ARS.xsc && mv ARS.xsc ARS.c > gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include = -fno-strict-aliasing > -pipe -I/usr/local/include -D_LARGEFILE_SOURCE = -D_FILE_OFFSET_BITS=3D64 -O > -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC > "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 = -DARS452 > -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 = -DPERL_BASEREV_IS=3D50 ARS.c > gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include = -fno-strict-aliasing > -pipe -I/usr/local/include -D_LARGEFILE_SOURCE = -D_FILE_OFFSET_BITS=3D64 -O > -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC > "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 = -DARS452 > -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 = -DPERL_BASEREV_IS=3D50 > support.c > gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include = -fno-strict-aliasing > -pipe -I/usr/local/include -D_LARGEFILE_SOURCE = -D_FILE_OFFSET_BITS=3D64 -O > -DVERSION=3D\"1.83\" -DXS_VERSION=3D\"1.83\" -fPIC > "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 = -DARS452 > -DPERL_PATCHLEVEL_IS=3D8 -DPERL_SUBVERSION_IS=3D5 = -DPERL_BASEREV_IS=3D50 > supportrev.c > Running Mkbootstrap for ARS () > chmod 644 ARS.bs > rm -f blib/arch/auto/ARS/ARS.so > LD_RUN_PATH=3D"/usr/lib" gcc -B/usr/ccs/bin/ -G -L/usr/local/lib = ARS.o > support.o supportrev.o /opt/arsystem/api/lib/libar.a -o > blib/arch/auto/ARS/ARS.so -L/opt/arsystem/api/lib -lpthread > chmod 755 blib/arch/auto/ARS/ARS.so > cp ARS.bs blib/arch/auto/ARS/ARS.bs > chmod 644 blib/arch/auto/ARS/ARS.bs > # pwd > /data/urbekl/ARSperl-1.83 > # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS > total 0 > # > > Thanks - Misi, RRR AB, http://www.rrr.se > >> Misi, >> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but = I'm >> using Perl 5.6.1, but it shouldn't matter. >> >> Did the 'make complete okay? It should have put the autosplit.ix = file >> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS. >> Are you running the 'make test' from your install directory = (presumably >> '/data/urbekl/ARSperl-1.83')? >> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when = I >> did not define ARTCPPORT to that matching the AR Server. >> >> I hope this helps, >> Mark >> >> Mark Vaughan >> >> Programmer III >> >> >> >> Direct: +1 303 802 2426 >> >> Cell: +1 303 601 4434 >> >> Fax: +1 303 802 1420 >> >> mar...@ev... >> >> Evolving Systems, Inc. >> >> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112 >> >> www.evolving.com >> >> -----Original Message----- >> From: ars...@ar... >> [mailto:ars...@ar...] On Behalf Of Misi = Mladoniczky >> Sent: Thursday, April 14, 2005 12:03 PM >> To: ars...@ar... >> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8... >> >> Hi, >> >> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83 >> and >> ARAPI version 6.3. >> >> "make test" gives me a lot of errors, but I did a "make install" = anyway. >> This is what happens when i try to use ARS: >> # perl >> use ARS; >> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains: >> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 >> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris >> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl = .) >> at >> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160. >> at ARS.pm line 64 >> >> This is some of the output from "make test": >> # make test >> ... >> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC >> contains: /data/urbekl/ARSperl-1.83/blib/lib >> /data/urbekl/ARSperl-1.83/blib/arch >> /usr/local/lib/perl5/5.8.5/sun4-solaris >> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 >> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris >> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris >> /usr/local/lib/perl5/site_perl/5.8.5 >> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris >> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl . >> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5 >> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris >> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl = .) >> at >> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160. >> at ARS.pm line 64 >> t/10getlist..........NOK 2# Failed test (t/10getlist.t at line = 20) >> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode >> arguments) (ARERR #91) >> t/10getlist..........NOK 4# Failed test (t/10getlist.t at line = 28) >> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode >> arguments) >> (ARERR #91) >> t/10getlist..........NOK 6# Failed test (t/10getlist.t at line = 36) >> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments) >> (ARERR #91) >> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9. >> t/10getlist..........dubious >> Test returned status 3 (wstat 768, 0x300) >> DIED. FAILED tests 2, 4, 6 >> Failed 3/9 tests, 66.67% okay >> ... >> Failed Test Stat Wstat Total Fail Failed List of Failed >> = ------------------------------------------------------------------------ >> ------- >> t/02export.t 0 139 ?? ?? % ?? >> t/10alink.t 0 139 ?? ?? % ?? >> t/10entry.t 22 5632 10 18 180.00% 2-10 >> t/10getlist.t 3 768 9 3 33.33% 2 4 6 >> t/12lotsoffields.t 104 102 98.08% 3-104 >> t/13join.t 7 5 71.43% 3-7 >> t/20merge.t 5 2 40.00% 4 6 >> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, = 22.73% >> okay. >> make: *** [test_dynamic] Error 29 >> # >> >> These are the system specific things i installed prior to arsperl: >> binutils-2.11.2-sol8-sparc-local >> gcc_small-3.4.2-sol8-sparc-local >> libiconv-1.8-sol8-sparc-local >> make-3.80-sol8-sparc-local >> perl-5.8.5-sol8-sparc-local >> SUNWarc >> SUNWhea >> SUNWlibm >> >> Best Regards - Misi, RRR AB, http://www.rrr.se >> >> >> >> ------------------------------------------------------- >> SF email is sponsored by - The IT Product Guide >> Read honest & candid reviews on hundreds of IT Products from real = users. >> Discover which products truly live up to the hype. Start reading now. >> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick >> _______________________________________________ >> Arsperl-users mailing list >> Ars...@ar... >> https://lists.sourceforge.net/lists/listinfo/arsperl-users >> >> >> >> ------------------------------------------------------- >> SF email is sponsored by - The IT Product Guide >> Read honest & candid reviews on hundreds of IT Products from real = users. >> Discover which products truly live up to the hype. Start reading now. >> http://ads.osdn.com/?ad_ide95&alloc_id 396&op=CCk >> _______________________________________________ >> Arsperl-users mailing list >> Ars...@ar... >> https://lists.sourceforge.net/lists/listinfo/arsperl-users >> > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real = users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick > _______________________________________________ > Arsperl-users mailing list > Ars...@ar... > https://lists.sourceforge.net/lists/listinfo/arsperl-users > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real = users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_ide95&alloc_id 396&op=CCk > _______________________________________________ > Arsperl-users mailing list > Ars...@ar... > https://lists.sourceforge.net/lists/listinfo/arsperl-users > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick _______________________________________________ Arsperl-users mailing list Ars...@ar... https://lists.sourceforge.net/lists/listinfo/arsperl-users |
|
From: Misi M. <mi...@rr...> - 2005-04-20 14:58:47
|
Mark,
I did a 'make clean', 'perl Makefile.PL' multiple times to start from
scratch. I even deleted the directory and started all over. This did not
help...
I had to do the manual steps to get it installed ok.
Best Regards - Misi, RRR AB, http://www.rrr.se
> Misi,
> I saw something in a previous message:
>> # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
>> total 0
>
> This tells me that the directory already exists. I checked on my system
> and could not get the .ix file to be generated when the directory existed
> either. I did a 'make clean' followed by 'perl Makefile.PL' and, finally,
> by 'make'. The file then showed up.
>
> I hope this helps,
> Mark Vaughan
>
> Programmer III
>
>
>
> Direct: +1 303 802 2426
>
> Cell: +1 303 601 4434
>
> Fax: +1 303 802 1420
>
> mar...@ev...
>
> Evolving Systems, Inc.
>
> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>
> www.evolving.com
>
> -----Original Message-----
> From: ars...@ar...
> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
> Sent: Friday, April 15, 2005 1:10 AM
> To: ars...@ar...
> Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
>
> Hi Mark,
>
> The command you suggested created the autosplit.ix. Is there some problem
> in my Makefile!?
>
> "make test" was more successfull, and I got it to work.
>
> The "make install" did only copy the autosplit.ix, and I had to manually
> copy the following files to
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris/:
> _h2ph_pre.ph
> ARS.pm
> ARSar-h.pm
> ARSarerrno-h.pm
> ARSnparm.pm
> ARSnt-h.pm
> ARSnterrno-h.pm
> ARSOOform.pm
> ARSOOmsgs.pm
> ARSOOsup.pm
>
> Best Regards - Misi, RRR AB, http://www.rrr.se
>
>> It doesn't appear to be running the autosplit correctly.
>>
>> Does the file show up if you do (from the ARSperl-1.83 dir):
>> perl -e 'use AutoSplit;autosplit("ARS.pm","blib/lib/auto",0,1,1)'
>>
>> If this command works correctly you should see:
>> AutoSplitting ARS.pm (blib/lib/auto/ARS)
>>
>> and the file blib/lib/auto/ARS/autosplit.ix should now exist.
>> This should remove that 'make test' error about autosplit.ix
>>
>> Mark
>>
>> Mark Vaughan
>>
>> Programmer III
>>
>>
>>
>> Direct: +1 303 802 2426
>>
>> Cell: +1 303 601 4434
>>
>> Fax: +1 303 802 1420
>>
>> mar...@ev...
>>
>> Evolving Systems, Inc.
>>
>> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>>
>> www.evolving.com
>>
>>
>> -----Original Message-----
>> From: ars...@ar...
>> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
>> Sent: Thursday, April 14, 2005 12:48 PM
>> To: ars...@ar...
>> Subject: RE: [Arsperl-users] Install problems 1.83 on Solaris 8...
>>
>> Hi Mark and Jeff,
>>
>> I am trying to compile against the 6.3 API.
>>
>> I see no errors when doing a make (after getting all the packages right
>> anyhow...).
>>
>> This is the complete output from "make":
>>
>> # make
>> cp artypes.ph blib/lib/artypes.ph
>> /usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp -typemap
>> /usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap ARS.xs >
>> ARS.xsc && mv ARS.xsc ARS.c
>> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
>> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
>> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
>> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
>> ARS.c
>> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
>> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
>> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
>> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
>> support.c
>> gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
>> -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>> -DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
>> "-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
>> -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
>> supportrev.c
>> Running Mkbootstrap for ARS ()
>> chmod 644 ARS.bs
>> rm -f blib/arch/auto/ARS/ARS.so
>> LD_RUN_PATH="/usr/lib" gcc -B/usr/ccs/bin/ -G -L/usr/local/lib ARS.o
>> support.o supportrev.o /opt/arsystem/api/lib/libar.a -o
>> blib/arch/auto/ARS/ARS.so -L/opt/arsystem/api/lib -lpthread
>> chmod 755 blib/arch/auto/ARS/ARS.so
>> cp ARS.bs blib/arch/auto/ARS/ARS.bs
>> chmod 644 blib/arch/auto/ARS/ARS.bs
>> # pwd
>> /data/urbekl/ARSperl-1.83
>> # ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
>> total 0
>> #
>>
>> Thanks - Misi, RRR AB, http://www.rrr.se
>>
>>> Misi,
>>> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but I'm
>>> using Perl 5.6.1, but it shouldn't matter.
>>>
>>> Did the 'make complete okay? It should have put the autosplit.ix file
>>> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS.
>>> Are you running the 'make test' from your install directory (presumably
>>> '/data/urbekl/ARSperl-1.83')?
>>> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when I
>>> did not define ARTCPPORT to that matching the AR Server.
>>>
>>> I hope this helps,
>>> Mark
>>>
>>> Mark Vaughan
>>>
>>> Programmer III
>>>
>>>
>>>
>>> Direct: +1 303 802 2426
>>>
>>> Cell: +1 303 601 4434
>>>
>>> Fax: +1 303 802 1420
>>>
>>> mar...@ev...
>>>
>>> Evolving Systems, Inc.
>>>
>>> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>>>
>>> www.evolving.com
>>>
>>> -----Original Message-----
>>> From: ars...@ar...
>>> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
>>> Sent: Thursday, April 14, 2005 12:03 PM
>>> To: ars...@ar...
>>> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8...
>>>
>>> Hi,
>>>
>>> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83
>>> and
>>> ARAPI version 6.3.
>>>
>>> "make test" gives me a lot of errors, but I did a "make install"
>>> anyway.
>>> This is what happens when i try to use ARS:
>>> # perl
>>> use ARS;
>>> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains:
>>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
>>> at
>>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>>> at ARS.pm line 64
>>>
>>> This is some of the output from "make test":
>>> # make test
>>> ...
>>> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC
>>> contains: /data/urbekl/ARSperl-1.83/blib/lib
>>> /data/urbekl/ARSperl-1.83/blib/arch
>>> /usr/local/lib/perl5/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.5
>>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .
>>> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
>>> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
>>> at
>>> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
>>> at ARS.pm line 64
>>> t/10getlist..........NOK 2# Failed test (t/10getlist.t at line 20)
>>> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode
>>> arguments) (ARERR #91)
>>> t/10getlist..........NOK 4# Failed test (t/10getlist.t at line 28)
>>> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode
>>> arguments)
>>> (ARERR #91)
>>> t/10getlist..........NOK 6# Failed test (t/10getlist.t at line 36)
>>> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments)
>>> (ARERR #91)
>>> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9.
>>> t/10getlist..........dubious
>>> Test returned status 3 (wstat 768, 0x300)
>>> DIED. FAILED tests 2, 4, 6
>>> Failed 3/9 tests, 66.67% okay
>>> ...
>>> Failed Test Stat Wstat Total Fail Failed List of Failed
>>> ------------------------------------------------------------------------
>>> -------
>>> t/02export.t 0 139 ?? ?? % ??
>>> t/10alink.t 0 139 ?? ?? % ??
>>> t/10entry.t 22 5632 10 18 180.00% 2-10
>>> t/10getlist.t 3 768 9 3 33.33% 2 4 6
>>> t/12lotsoffields.t 104 102 98.08% 3-104
>>> t/13join.t 7 5 71.43% 3-7
>>> t/20merge.t 5 2 40.00% 4 6
>>> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, 22.73%
>>> okay.
>>> make: *** [test_dynamic] Error 29
>>> #
>>>
>>> These are the system specific things i installed prior to arsperl:
>>> binutils-2.11.2-sol8-sparc-local
>>> gcc_small-3.4.2-sol8-sparc-local
>>> libiconv-1.8-sol8-sparc-local
>>> make-3.80-sol8-sparc-local
>>> perl-5.8.5-sol8-sparc-local
>>> SUNWarc
>>> SUNWhea
>>> SUNWlibm
>>>
>>> Best Regards - Misi, RRR AB, http://www.rrr.se
>>>
>>>
>>>
>>> -------------------------------------------------------
>>> SF email is sponsored by - The IT Product Guide
>>> Read honest & candid reviews on hundreds of IT Products from real
>>> users.
>>> Discover which products truly live up to the hype. Start reading now.
>>> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>>> _______________________________________________
>>> Arsperl-users mailing list
>>> Ars...@ar...
>>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>>
>>>
>>>
>>> -------------------------------------------------------
>>> SF email is sponsored by - The IT Product Guide
>>> Read honest & candid reviews on hundreds of IT Products from real
>>> users.
>>> Discover which products truly live up to the hype. Start reading now.
>>> http://ads.osdn.com/?ad_ide95&alloc_id 396&opÌk
>>> _______________________________________________
>>> Arsperl-users mailing list
>>> Ars...@ar...
>>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>>
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>>
>>
>> -------------------------------------------------------
>> SF email is sponsored by - The IT Product Guide
>> Read honest & candid reviews on hundreds of IT Products from real users.
>> Discover which products truly live up to the hype. Start reading now.
>> http://ads.osdn.com/?ad_ide95&alloc_id 396&opÌk
>> _______________________________________________
>> Arsperl-users mailing list
>> Ars...@ar...
>> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id396&opÌk
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
|
|
From: Amir S. <sed...@ya...> - 2005-05-04 22:10:06
|
This problem I'm having sounds almost identical to one
discussed earlier by Missi and Mark, but following the
same steps did not resolve my problem.
I run perl Makefile.PL and everything works, then I do
a make, and that works without any errors. Then I run
make test and I get a ton of errors stating
Can't locate auto/ARS/autosplit.ix in @INC (@INC
contains: /export/home/asedighi/ARSperl-1.83/blib/lib
/export/home/asedighi/ARSperl-1.83/blib/arch
/export/home/asedighi/perl/lib/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/5.8.6
/export/home/asedighi/perl/lib/site_perl/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/site_perl/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/site_perl/5.8.6
/export/home/asedighi/perl/lib/site_perl/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/site_perl/5.8.6
/export/home/asedighi/perl/lib/site_perl .
/export/home/asedighi/perl/lib/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/5.8.6
/export/home/asedighi/perl/lib/site_perl/5.8.6/sun4-solaris
/export/home/asedighi/perl/lib/site_perl/5.8.6
/export/home/asedighi/perl/lib/site_perl .) at
/export/home/asedighi/perl/lib/5.8.6/AutoLoader.pm
line 160.
These commands have been run following the make and
before the make test:
bash-2.05$ ls -l blib/lib/auto/ARS/
total 0
bash-2.05$ perl -e "use AutoSplit;
autosplit("ARS.pm","blib/lib/auto",0,1,1);"
Illegal division by zero at -e line 1.
Any idea what's wrong here?
Thanks,
Amir.
oh btw
Perl 5.8.6
SunOS 5.9
GNU Make 3.80
ARS 6.3
|
|
From: Misi M. <mi...@rr...> - 2005-04-14 18:52:37
|
Hi Mark and Jeff,
I am trying to compile against the 6.3 API.
I see no errors when doing a make (after getting all the packages right
anyhow...).
This is the complete output from "make":
# make
cp artypes.ph blib/lib/artypes.ph
/usr/local/bin/perl /usr/local/lib/perl5/5.8.5/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.8.5/ExtUtils/typemap -typemap typemap ARS.xs >
ARS.xsc && mv ARS.xsc ARS.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
-DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
-DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50 ARS.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
-DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
-DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
support.c
gcc -B/usr/ccs/bin/ -c -I/opt/arsystem/api/include -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
-DVERSION=\"1.83\" -DXS_VERSION=\"1.83\" -fPIC
"-I/usr/local/lib/perl5/5.8.5/sun4-solaris/CORE" -g -DARS32 -DARS452
-DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=5 -DPERL_BASEREV_IS=50
supportrev.c
Running Mkbootstrap for ARS ()
chmod 644 ARS.bs
rm -f blib/arch/auto/ARS/ARS.so
LD_RUN_PATH="/usr/lib" gcc -B/usr/ccs/bin/ -G -L/usr/local/lib ARS.o
support.o supportrev.o /opt/arsystem/api/lib/libar.a -o
blib/arch/auto/ARS/ARS.so -L/opt/arsystem/api/lib -lpthread
chmod 755 blib/arch/auto/ARS/ARS.so
cp ARS.bs blib/arch/auto/ARS/ARS.bs
chmod 644 blib/arch/auto/ARS/ARS.bs
# pwd
/data/urbekl/ARSperl-1.83
# ls -l /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS
total 0
#
Thanks - Misi, RRR AB, http://www.rrr.se
> Misi,
> I just installed the 1.83 with the 6.0 api (from 6.3 ARServer), but I'm
> using Perl 5.6.1, but it shouldn't matter.
>
> Did the 'make complete okay? It should have put the autosplit.ix file
> in /data/urbekl/ARSperl-1.83/blib/lib/auto/ARS.
> Are you running the 'make test' from your install directory (presumably
> '/data/urbekl/ARSperl-1.83')?
> I ran into the 'RPC: Can't encode arguments) (ARERR #91)' error when I
> did not define ARTCPPORT to that matching the AR Server.
>
> I hope this helps,
> Mark
>
> Mark Vaughan
>
> Programmer III
>
>
>
> Direct: +1 303 802 2426
>
> Cell: +1 303 601 4434
>
> Fax: +1 303 802 1420
>
> mar...@ev...
>
> Evolving Systems, Inc.
>
> 9777 Mt. Pyramid Court, Suite 100, Englewood, CO USA 80112
>
> www.evolving.com
>
> -----Original Message-----
> From: ars...@ar...
> [mailto:ars...@ar...] On Behalf Of Misi Mladoniczky
> Sent: Thursday, April 14, 2005 12:03 PM
> To: ars...@ar...
> Subject: [Arsperl-users] Install problems 1.83 on Solaris 8...
>
> Hi,
>
> I am having problems doing "make test" on Solaris 8 with ARSPerl 1.83
> and
> ARAPI version 6.3.
>
> "make test" gives me a lot of errors, but I did a "make install" anyway.
> This is what happens when i try to use ARS:
> # perl
> use ARS;
> Can't locate auto/ARS/autosplit.ix in @INC (@INC contains:
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
> at
> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
> at ARS.pm line 64
>
> This is some of the output from "make test":
> # make test
> ...
> t/10getlist..........Can't locate auto/ARS/autosplit.ix in @INC (@INC
> contains: /data/urbekl/ARSperl-1.83/blib/lib
> /data/urbekl/ARSperl-1.83/blib/arch
> /usr/local/lib/perl5/5.8.5/sun4-solaris
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .
> /usr/local/lib/perl5/5.8.5/sun4-solaris /usr/local/lib/perl5/5.8.5
> /usr/local/lib/perl5/site_perl/5.8.5/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.5 /usr/local/lib/perl5/site_perl .)
> at
> /usr/local/lib/perl5/5.8.5/AutoLoader.pm line 160.
> at ARS.pm line 64
> t/10getlist..........NOK 2# Failed test (t/10getlist.t at line 20)
> # GetListEscalation (-1) [ERROR] RPC call failed (RPC: Can't encode
> arguments) (ARERR #91)
> t/10getlist..........NOK 4# Failed test (t/10getlist.t at line 28)
> # GetListFilter (-1) [ERROR] RPC call failed (RPC: Can't encode
> arguments)
> (ARERR #91)
> t/10getlist..........NOK 6# Failed test (t/10getlist.t at line 36)
> # GetListSchema [ERROR] RPC call failed (RPC: Can't encode arguments)
> (ARERR #91)
> t/10getlist..........ok 9/9# Looks like you failed 3 tests of 9.
> t/10getlist..........dubious
> Test returned status 3 (wstat 768, 0x300)
> DIED. FAILED tests 2, 4, 6
> Failed 3/9 tests, 66.67% okay
> ...
> Failed Test Stat Wstat Total Fail Failed List of Failed
> ------------------------------------------------------------------------
> -------
> t/02export.t 0 139 ?? ?? % ??
> t/10alink.t 0 139 ?? ?? % ??
> t/10entry.t 22 5632 10 18 180.00% 2-10
> t/10getlist.t 3 768 9 3 33.33% 2 4 6
> t/12lotsoffields.t 104 102 98.08% 3-104
> t/13join.t 7 5 71.43% 3-7
> t/20merge.t 5 2 40.00% 4 6
> Failed 7/13 test scripts, 46.15% okay. 119/154 subtests failed, 22.73%
> okay.
> make: *** [test_dynamic] Error 29
> #
>
> These are the system specific things i installed prior to arsperl:
> binutils-2.11.2-sol8-sparc-local
> gcc_small-3.4.2-sol8-sparc-local
> libiconv-1.8-sol8-sparc-local
> make-3.80-sol8-sparc-local
> perl-5.8.5-sol8-sparc-local
> SUNWarc
> SUNWhea
> SUNWlibm
>
> Best Regards - Misi, RRR AB, http://www.rrr.se
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_ide95&alloc_id396&opÌk
> _______________________________________________
> Arsperl-users mailing list
> Ars...@ar...
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
|
Thanks for helping keep SourceForge clean.
X