Menu
▾
▴
1 Attachments
#550 AROS boot on MIST, serial ouptut
I was requested by Wawrzon to submit the serial output from AROS when booting on the MIST FPGA board, so here it is. The obvious issue is that the Gayle IDE controller does not function well, whether this is an issue with AROS or whether it is an issue with the Minimig core... or most likely, a combination.
I also have the original Minimig, and will attempt to grab the serial output there as well.
(in case the output here is mangled, I have attached the capture as a gzip file as well)
Cheers!
Resident modules (addr: pri flags version name):
+ 001ec6f2: 127 02 3 "kernel.resource"
+ 001de884: 120 01 51 "exec.library"
+ 001ec5a2: 110 82 41 "expansion.library"
+ 001f0674: 105 01 41 "diag init"
+ 001de038: 100 01 41 "mmu"
[EXEC] InitCode: calling InitResident (110 82 "expansion.library")
configchain
Found board 00e80000: mfg=5020 prod=0 size=00800000 serial=00000001 diag=00000000
Configuring board: cd=00003128 mfg=5020 prod=0 size=00800000 type=e0
-> configured, 00200000 - 009fffff
Found board 00e80000: mfg=5020 prod=16 size=01000000 serial=00000002 diag=00000000
Configuring board: cd=00003170 mfg=5020 prod=16 size=01000000 type=a0
size=1 prev=64 new=64 end=255
-> configured, 40000000 - 40ffffff
configchain done
adding ram boards
ram board at 00200000, size 00800000 attr 00000605
ram board at 40000000, size 01000000 attr 00000405
ram boards done
[EXEC] InitCode: leave InitCode(0x02, 0)
* 001ec6f2: 127 02 3 "kernel.resource"
* 001de884: 120 01 51 "exec.library"
* 001ec5a2: 110 82 41 "expansion.library"
* 001f0674: 105 01 41 "diag init"
* 40f2e650: 103 81 41 "utility.library"
* 40f2d39c: 101 81 41 "aros.library"
* 001de038: 100 01 41 "mmu"
* 40fef34c: 100 81 41 "potgo.resource"
* 40fe8762: 99 01 2 "processor.resource"
* 40f403da: 94 81 43 "oop.library"
* 40fcb088: 92 81 1 "hiddclass.hidd"
* 40feec94: 80 01 0 "cia.resource"
* 40ffc556: 80 01 1 "FileSystem.resource"
* 40fe8024: 70 81 41 "battclock.resource"
* 40fd8908: 66 81 45 "gfx.hidd"
* 40f5a210: 65 81 45 "graphics.library"
* 40f5e6f4: 64 81 50 "layers.library"
* 40fa77d4: 50 81 41 "timer.device"
* 40ffc2fe: 48 81 41 "card.resource"
* 40fd92de: 45 81 2 "keyboard.hidd"
* 40fda144: 45 81 2 "mouse.hidd"
* 40fefcda: 45 01 41 "misc.resource"
* 40fa9172: 44 81 41 "keyboard.device"
* 40fb178a: 44 81 41 "gameport.device"
* 40f46376: 40 81 3 "partition.library"
* 40f47604: 40 81 41 "keymap.library"
* 40fdaaf2: 40 81 1 "amigakbd.hidd"
* 40fdb5b2: 40 81 1 "amigamouse.hidd"
* 40fef9fa: 39 81 41 "disk.resource"
* 40fb0ca4: 35 81 41 "trackdisk.device"
* 40fa86fc: 30 81 41 "input.device"
* 40f861be: 15 81 50 "intuition.library"
* 40fe113e: 9 81 45 "amigavideo.hidd"
* 40fba25e: 5 81 40 "cd.device"
* 40fae698: 4 81 41 "console.device"
* 40fb89dc: 4 81 43 "ata.device"
* 40fe78b0: 3 81 1 "ata_gayle.hidd"
* 40f41786: 0 81 40 "mathieeesingbas.library"
* 40f910e0: 0 81 41 "gadtools.library"
* 40fbcaf0: - 1 01 40 "cdfs-handler"
* 40fc70b6: - 1 01 41 "afs-handler"
* 40ffddca: - 9 01 41 "romboot"
* 40fe6806: - 10 81 45 "uaegfx.hidd"
* 40ffc576: - 45 01 41 "alert.hook
"
* 40fb2c0c: - 49 01 43 "ATA boot wait"
* 40feec74: - 50 01 41 "dosboot.resource"
* 40f2ecf8: - 120 00 50 "dos.library"
* 40f40c5a: - 120 80 41 "mathffp.library"
* 40fa604e: - 120 80 45 "workbench.library"
* 40fb29bc: - 120 80 41 "audio.device"
* 40fec910: - 121 04 41 "DOSBoot cleanup"
* 40fa3428: - 122 84 44 "icon.library"
* 40fe91d8: - 123 04 41 "lddemon.resource"
* 40ff2a8c: - 123 04 41 "shell.resource"
* 40ff6a6c: - 123 04 41 "shellcommands.resource"
* 40ffa65a: - 123 04 44 "workbook.resource"
* 40ffa6ca: - 123 00 40 "workbench.task"
* 40fbfece: - 124 04 41 "con-handler"
* 40fca1be: - 125 04 1 "ram-handler"
* 40fa6558: - 126 84 41 "setpatch.library"
[EXEC] InitCode: enter InitCode(0x01, 0)
[EXEC] InitCode: kickmemptr=0x00000000 kicktagptr=0x00000000 kickchecksum=0x00000000
[EXEC] InitCode: calling InitResident (120 01 "exec.library")
[EXEC] InitCode: calling InitResident (105 01 "diag init")
callroms
Read boot ROM base=00200000 cd=00003128 type=e0
Board without boot ROM
Read boot ROM base=40000000 cd=00003170 type=a0
Board without boot ROM
callroms done
40000000: 40000020 - 41000000 00000405 20 'Fast Memory'
00200000: 00200020 - 00a00000 00000605 0 'Fast Memory'
00001000: 00001000 - 00200000 00001703 -10 'chip memory'
00002048: 00f80000 - 01000000 00000400 -128 'Kickstart ROM'
00002068: 00e00000 - 00e80000 00000400 -128 'Kickstart ROM'
[EXEC] InitCode: calling InitResident (103 81 "utility.library")
[EXEC] InitCode: calling InitResident (101 81 "aros.library")
[EXEC] InitCode: calling InitResident (100 01 "mmu")
[EXEC] InitCode: calling InitResident (100 81 "potgo.resource")
[EXEC] InitCode: calling InitResident (99 01 "processor.resource")
[EXEC] InitCode: calling InitResident (94 81 "oop.library")
[EXEC] InitCode: calling InitResident (92 81 "hiddclass.hidd")
[EXEC] InitCode: calling InitResident (80 01 "cia.resource")
[EXEC] InitCode: calling InitResident (80 01 "FileSystem.resource")
[EXEC] InitCode: calling InitResident (70 81 "battclock.resource")
[EXEC] InitCode: calling InitResident (66 81 "gfx.hidd")
[EXEC] InitCode: calling InitResident (65 81 "graphics.library")
[EXEC] InitCode: calling InitResident (64 81 "layers.library")
[EXEC] InitCode: calling InitResident (50 81 "timer.device")
[EXEC] InitCode: calling InitResident (48 81 "card.resource")
[EXEC] InitCode: calling InitResident (45 81 "keyboard.hidd")
[EXEC] InitCode: calling InitResident (45 81 "mouse.hidd")
[EXEC] InitCode: calling InitResident (45 01 "misc.resource")
[EXEC] InitCode: calling InitResident (44 81 "keyboard.device")
[EXEC] InitCode: calling InitResident (44 81 "gameport.device")
[EXEC] InitCode: calling InitResident (40 81 "partition.library")
[EXEC] InitCode: calling InitResident (40 81 "keymap.library")
[EXEC] InitCode: calling InitResident (40 81 "amigakbd.hidd")
[EXEC] InitCode: calling InitResident (40 81 "amigamouse.hidd")
[EXEC] InitCode: calling InitResident (39 81 "disk.resource")
[EXEC] InitCode: calling InitResident (35 81 "trackdisk.device")
[EXEC] InitCode: calling InitResident (30 81 "input.device")
[EXEC] InitCode: calling InitResident (15 81 "intuition.library")
[EXEC] InitCode: calling InitResident (9 81 "amigavideo.hidd")
[EXEC] InitCode: calling InitResident (5 81 "cd.device")
[EXEC] InitCode: calling InitResident (4 81 "console.device")
[EXEC] InitCode: calling InitResident (4 81 "ata.device")
[EXEC] InitCode: calling InitResident (3 81 "ata_gayle.hidd")
[ATA] Gayle ID=dd. Possible IDE port=00da0000.
[ATA] Status=40,40
[ATA00] ata_Identify: Unit info: AYUQEB RASOD_SI K / iMTSiMiniMHgrafdli e / 1.00
[EXEC] InitCode: calling InitResident (0 81 "mathieeesingbas.library")
[EXEC] InitCode: calling InitResident (0 81 "gadtools.library")
[EXEC] InitCode: calling InitResident (-1 01 "cdfs-handler")
[EXEC] InitCode: calling InitResident (-1 01 "afs-handler")
[EXEC] InitCode: calling InitResident (-9 01 "romboot")
romtaginit
romtaginit done
[EXEC] InitCode: calling InitResident (-10 81 "uaegfx.hidd")
[EXEC] InitCode: calling InitResident (-45 01 "alert.hook
")
[EXEC] InitCode: calling InitResident (-49 01 "ATA boot wait")
[EXEC] InitCode: calling InitResident (-50 01 "dosboot.resource")
[ATA:Gayle] ATA interrupt but BUSY flag set!?
[ATA00] Timeout while waiting for device to complete operation
[ATA00] ata_exec_cmd: Device is late - no response
[ATA:Gayle] ATA interrupt but BUSY flag set!?
[ATA00] Timeout while waiting for device to complete operation
[ATA00] ata_exec_cmd: Device is late - no response
[ATA:Gayle] ATA interrupt but BUSY flag set!?
[ATA00] Timeout while waiting for device to complete operation
[ATA00] ata_exec_cmd: Device is late - no response
[ATA:Gayle] ATA interrupt but BUSY flag set!?
[ATA00] Timeout while waiting for device to complete operation
[ATA00] ata_exec_cmd: Device is late - no response
[ATA:Gayle] ATA interrupt but BUSY flag set!?
[ATA00] Timeout while waiting for device to complete operation
[ATA00] ata_exec_cmd: Device is late - no response
[EXEC] InitCode: enter InitCode(0x04, 0)
[EXEC] InitCode: calling InitResident (-121 04 "DOSBoot cleanup")
[EXEC] InitCode: calling InitResident (-122 84 "icon.library")
[EXEC] InitCode: calling InitResident (-123 04 "lddemon.resource")
[EXEC] InitCode: calling InitResident (-123 04 "shell.resource")
[EXEC] InitCode: calling InitResident (-123 04 "shellcommands.resource")
[EXEC] InitCode: calling InitResident (-123 04 "workbook.resource")
[EXEC] InitCode: calling InitResident (-124 04 "con-handler")
[EXEC] InitCode: calling InitResident (-125 04 "ram-handler")
[EXEC] InitCode: calling InitResident (-126 84 "setpatch.library")
[EXEC] InitCode: leave InitCode(0x04, 0)
StartWorkbench: ptr = 00000000
StartWorkbench: DOSBase = 400b4a10, Segment = 400c9494
