I'm trying to use ARMboot in the EPXA10 development board, and when I
intend to substitute the line of CONFIG_BOOTARGS in the
#define CONFIG_BOOTARGS "root=/dev/nfs mem=16M console=ttyUA0,57600 nfsroot=/usr/devel/flashdisk_top/%s,rsize=4096,wsize=4096 ip=18.104.22.168:22.214.171.124:126.96.36.199:255.255.255.0:epxa1db-1:eth0:off"
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw mem=128M rootfstype=jffs2 console=ttyUA0,57600"
the compilation runs, but when I try to load the ".hex" file to the
flash (with exc_flash_programmer) it generates the next warning:
Warning: One or more of the blocks exceeded the 64K limit
The resultant wrap-around may have caused corruption and should be checked
by running the application again, but with the verify only option set
After this, the board doesn't reset. Does anyone know what the problem is?
Thanks in advance,