From: Iain Scott <ISCOTT@altera.com> - 2003-04-01 09:27:26
I don't know if it's what you intended, but for the load address you're
using you need:
> -----Original Message-----
> From: imateos [mailto:imateos@...]
> Sent: Monday, March 31, 2003 3:57 PM
> To: armboot-users@...
> Subject: [ARMboot-users] Linux on EPXA10
> I'm trying to download a kernel linux to an Altera's EPXA10
> Development Board.
> I've already created a Linux kernel image ( 2.4.19 kernel
> patched with patch-2.4.19.rmk7.gz)
> And now, I'm trying to load the kernel from the flash
> These are the steps I've done:
> mkimage -A ARM -a 0x06000000 -e 0x06000000 -T kernel -n
> PRIMARY -C none -d arch/arm/boot/zImage zImage.bin
> arm-linux-objcopy -I binary -O ihex
> --change-address=0x00200000 zImage.bin zImage.hex
> exc_flash_programmer -f -p -v zImage.hex
> bootm 0x40020000
> But when I reset the board, it doesn't work.
> What's going wrong?
> I suppose that new configuration files are needed for ARMBoot
> to the EPXA10, is this right?
> Thanks in advance.
> Ignasi Mateos
> This SF.net email is sponsored by: ValueWeb:
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> No other company gives more support or power for your dedicated server
> ARMboot-users mailing list
Get latest updates about Open Source Projects, Conferences and News.