armadeus-commitlog Mailing List for armadeus (Page 62)

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "armadeus".

The branch, master has been updated
       via  54997a0cd2a92ac5394ed42fb0dbe2cdaa7764f0 (commit)
      from  1e27a26a888f77c2f3668f8b0e4c2e771941b851 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 54997a0cd2a92ac5394ed42fb0dbe2cdaa7764f0
Author: Eric Jarrige <eri...@ar...>
Date:   Wed May 22 19:21:47 2013 +0200

    [OTHER] Busybox: cleanup obsolete patch

-----------------------------------------------------------------------

Summary of changes:
 ...usybox-1.19.4_stty_add_rs485_config.patch.tofix |  336 --------------------
 1 files changed, 0 insertions(+), 336 deletions(-)
 delete mode 100644 buildroot/package/busybox/busybox-1.19.4/001_busybox-1.19.4_stty_add_rs485_config.patch.tofix

diff --git a/buildroot/package/busybox/busybox-1.19.4/001_busybox-1.19.4_stty_add_rs485_config.patch.tofix b/buildroot/package/busybox/busybox-1.19.4/001_busybox-1.19.4_stty_add_rs485_config.patch.tofix
deleted file mode 100644
index 9f1f282..0000000
--- a/buildroot/package/busybox/busybox-1.19.4/001_busybox-1.19.4_stty_add_rs485_config.patch.tofix
+++ /dev/null
@@ -1,336 +0,0 @@
-BusyBox stty: Add RS485 config options
-
-The patch adds RS485 config options for serial devices/drivers
-which are supporting the ioctl based configurations documented in:
-https://www.kernel.org/doc/Documentation/serial/serial-rs485.txt
-
-New config parameters:
-rs485              - Switch on/off the RS485 mode
-rs485rtsonsend     - Set logical level for RTS pin when sending
-rs485rtsaftersend  - Set logical level for RTS pin after sent
-rs485rxduringtx    - Switch on/off Rx enable during packet transmit
-rs485delaybefore 0 - Set delay between RTS signaling and the
-                     transmission of the first bit
-rs485delayafter 0  - Set delay between the transmission of the last
-                     bit and the RTS state change
-
-New read only parameter:
-rs485delaylastchartx 0 - Shows the automatically calculated delay
-                         between the serial port Tx FIFO empty
-                         state and the last bit transmission
-
-Currently the following serial drivers supports the RS485 options:
-- crisv10.c ETRAX 100LX
-- atmel_serial.c Atmel AT91 / AT32
-- mxs-auart.c Freescale STMP37XX/STMP378X iMX28
-
-Signed-off-by: Janos Angeli <an...@an...>
----
-Index: busybox-1.19.4/coreutils/stty.c
-===================================================================
---- busybox-1.19.4.orig/coreutils/stty.c
-+++ busybox-1.19.4/coreutils/stty.c
-@@ -19,6 +19,8 @@
- 
-    Special for busybox ported by Vladimir Oleynik <dz...@si...> 2001
- 
-+   RS485 options added by Janos Angeli <an...@an...> 2013
-+
-    */
- 
- //usage:#define stty_trivial_usage
-@@ -32,6 +34,27 @@
- //usage:     "\n	[SETTING]	See manpage"
- 
- #include "libbb.h"
-+#include <asm-generic/ioctls.h>
-+#include <linux/ioctl.h>
-+
-+//#include <linux/serial.h>
-+//We don't include <linux/serial.h> now, because it is missing some RS485 definitions.
-+//We need only the serial_rs485 struct from it and the __u32 def from <linux/types.h>
-+//In later versions we will be able to switch back to the original include.
-+#include <linux/types.h>
-+struct serial_rs485 {
-+	__u32	flags;			/* RS485 feature flags */
-+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
-+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for RTS pin when sending */
-+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for RTS pin after sent */
-+#define SER_RS485_RX_DURING_TX		(1 << 4)
-+	__u32	delay_rts_before_send;	/* Delay before send */
-+	__u32	delay_rts_after_send;	/* Delay after send */
-+	__u32	delay_rts_last_char_tx;	/* Delay for last char Tx from FIFO (microseconds)
-+					   This delay is automatically calculated from baudrate */
-+	__u32	padding[4];		/* Memory is cheap, new structs are a royal PITA .. */
-+};
-+//End of temporally include <linux/serial.h>
- 
- #ifndef _POSIX_VDISABLE
- # define _POSIX_VDISABLE ((unsigned char) 0)
-@@ -966,11 +989,27 @@ static int find_param(const char *name)
- 	return i;
- }
- 
--static int recover_mode(const char *arg, struct termios *mode)
-+static int find_rs485config(const char *name)
-+{
-+	static const char params[] ALIGN1 =
-+		"rs485\0"		/* 1 */
-+		"rs485rtsonsend\0"	/* 2 */
-+		"rs485rtsaftersend\0"	/* 3 */
-+		"rs485rxduringtx\0"	/* 4 */
-+		"rs485delaybefore\0"	/* 5 */
-+		"rs485delayafter\0";	/* 6 */
-+	int i = index_in_strings(params, name) + 1;
-+	if ((i == 5) || (i == 6))
-+		i |= 0x80;
-+	return i;
-+}
-+
-+static int recover_mode(const char *arg, struct termios *mode, struct serial_rs485 *rs485conf, int paramcheck, int rs485)
- {
- 	int i, n;
- 	unsigned chr;
- 	unsigned long iflag, oflag, cflag, lflag;
-+	unsigned long rsflags, rsdelaybefore, rsdelayafter;
- 
- 	/* Scan into temporaries since it is too much trouble to figure out
- 	   the right format for 'tcflag_t' */
-@@ -989,15 +1028,28 @@ static int recover_mode(const char *arg,
- 		arg += n;
- 	}
- 
-+	if (rs485 >= 0) {
-+		if (sscanf(arg, ":%lx:%lx:%lx%n", &rsflags, &rsdelaybefore, &rsdelayafter, &n) != 3)
-+			return 0;
-+		rs485conf->flags = rsflags;
-+		rs485conf->delay_rts_before_send = rsdelaybefore;
-+		rs485conf->delay_rts_after_send = rsdelayafter;
-+		arg += n;
-+	}
-+
- 	/* Fail if there are too many fields */
--	if (*arg != '\0')
-+	if (*arg != '\0') {
-+		/* In the first pass of params verify we don't know the port device
-+		   have RS485 support or not, so give a try for the extra RS485 params */
-+		if ((paramcheck) && (sscanf(arg, ":%lx:%lx:%lx%n", &rsflags, &rsdelaybefore, &rsdelayafter, &n) == 3))
-+			return 1;
- 		return 0;
--
-+	}
- 	return 1;
- }
- 
--static void display_recoverable(const struct termios *mode,
--				int UNUSED_PARAM dummy)
-+static void display_recoverable(const struct termios *mode, const struct serial_rs485 *rs485conf,
-+				int UNUSED_PARAM dummy, int rs485)
- {
- 	int i;
- 	printf("%lx:%lx:%lx:%lx",
-@@ -1005,6 +1057,12 @@ static void display_recoverable(const st
- 		   (unsigned long) mode->c_cflag, (unsigned long) mode->c_lflag);
- 	for (i = 0; i < NCCS; ++i)
- 		printf(":%x", (unsigned int) mode->c_cc[i]);
-+	if (rs485 >= 0) {
-+		printf(":%lx:%lx:%lx",
-+			(unsigned long) rs485conf->flags,
-+			(unsigned long) rs485conf->delay_rts_before_send,
-+			(unsigned long) rs485conf->delay_rts_after_send);
-+	}
- 	bb_putchar('\n');
- }
- 
-@@ -1025,7 +1083,7 @@ static void display_speed(const struct t
- 	wrapf(fmt_str, tty_baud_to_value(ispeed), tty_baud_to_value(ospeed));
- }
- 
--static void do_display(const struct termios *mode, int all)
-+static void do_display(const struct termios *mode, const struct serial_rs485 *rs485conf, int all, int rs485)
- {
- 	int i;
- 	tcflag_t *bitsp;
-@@ -1086,6 +1144,25 @@ static void do_display(const struct term
- 		}
- 	}
- 	newline();
-+
-+	if (rs485 < 0) {
-+		if (all) {
-+			wrapf("RS485 not supported");
-+			newline();
-+		}
-+	} else {
-+		wrapf("%srs485 %srs485rtsonsend %srs485rtsaftersend %srs485rxduringtx",
-+			(rs485conf->flags & SER_RS485_ENABLED) ? "" : "-",
-+			(rs485conf->flags & SER_RS485_RTS_ON_SEND) ? "" : "-",
-+			(rs485conf->flags & SER_RS485_RTS_AFTER_SEND) ? "" : "-",
-+			(rs485conf->flags & SER_RS485_RX_DURING_TX) ? "" : "-");
-+		newline();
-+		wrapf("rs485delaybefore = %d; rs485delayafter = %d; rs485delaylastchartx = %d;\n",
-+			rs485conf->delay_rts_before_send,
-+			rs485conf->delay_rts_after_send,
-+			rs485conf->delay_rts_last_char_tx);
-+		newline();
-+	}
- }
- 
- static void sane_mode(struct termios *mode)
-@@ -1277,11 +1354,14 @@ int stty_main(int argc, char **argv) MAI
- int stty_main(int argc UNUSED_PARAM, char **argv)
- {
- 	struct termios mode;
--	void (*output_func)(const struct termios *, int);
-+	struct serial_rs485 rs485conf;
-+	void (*output_func)(const struct termios *, const struct serial_rs485 *, int, int);
- 	const char *file_name = NULL;
- 	int display_all = 0;
- 	int stty_state;
- 	int k;
-+	int rs485_supported;
-+	int rs485_setconfig;
- 
- 	INIT_G();
- 
-@@ -1306,6 +1386,11 @@ int stty_main(int argc UNUSED_PARAM, cha
- 				stty_state &= ~STTY_noargs;
- 				continue;
- 			}
-+			param = find_rs485config(arg+1);
-+			if ((param) && ((param & param_need_arg) == 0)) {
-+				stty_state &= ~STTY_noargs;
-+				continue;
-+			}
- 			/* It is an option - parse it */
- 			i = 0;
- 			while (arg[++i]) {
-@@ -1360,6 +1445,17 @@ int stty_main(int argc UNUSED_PARAM, cha
- 			continue;
- 		}
- 
-+		param = find_rs485config(arg);
-+		if (param & param_need_arg) {
-+			if (!argnext)
-+				bb_error_msg_and_die(bb_msg_requires_arg, arg);
-+			++k;
-+		}
-+		if (param) {
-+			stty_state &= ~STTY_noargs;
-+			continue;
-+		}
-+
- 		param = find_param(arg);
- 		if (param & param_need_arg) {
- 			if (!argnext)
-@@ -1394,7 +1490,7 @@ int stty_main(int argc UNUSED_PARAM, cha
- 			set_speed_or_die(output_speed, argnext, &mode);
- 			break;
- 		default:
--			if (recover_mode(arg, &mode) == 1) break;
-+			if (recover_mode(arg, &mode, &rs485conf, 1, -1) == 1) break;
- 			if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) break;
-  invalid_argument:
- 			bb_error_msg_and_die("invalid argument '%s'", arg);
-@@ -1425,15 +1521,17 @@ int stty_main(int argc UNUSED_PARAM, cha
- 	memset(&mode, 0, sizeof(mode));
- 	if (tcgetattr(STDIN_FILENO, &mode))
- 		perror_on_device_and_die("%s");
-+	rs485_supported = ioctl(STDIN_FILENO, TIOCGRS485, &rs485conf);
- 
- 	if (stty_state & (STTY_verbose_output | STTY_recoverable_output | STTY_noargs)) {
- 		get_terminal_width_height(STDOUT_FILENO, &G.max_col, NULL);
--		output_func(&mode, display_all);
-+		output_func(&mode, &rs485conf, display_all, rs485_supported);
- 		return EXIT_SUCCESS;
- 	}
- 
- 	/* Second pass: perform actions */
- 	k = 0;
-+	rs485_setconfig = 0;
- 	while (argv[++k]) {
- 		const struct mode_info *mp;
- 		const struct control_info *cp;
-@@ -1447,6 +1545,23 @@ int stty_main(int argc UNUSED_PARAM, cha
- 				set_mode(mp, 1 /* reversed */, &mode);
- 				stty_state |= STTY_require_set_attr;
- 			}
-+			param = find_rs485config(arg+1);
-+			if ((param) && ((param & param_need_arg) == 0)) {
-+				rs485_setconfig = 1;
-+				switch (param) {
-+					case 1:
-+						rs485conf.flags &= ~SER_RS485_ENABLED;
-+						break;
-+					case 2:
-+						rs485conf.flags &= ~SER_RS485_RTS_ON_SEND;
-+						break;
-+					case 3:
-+						rs485conf.flags &= ~SER_RS485_RTS_AFTER_SEND;
-+						break;
-+					case 4:
-+						rs485conf.flags &= ~SER_RS485_RX_DURING_TX;
-+				}
-+			}
- 			/* It is an option - already parsed. Skip it */
- 			continue;
- 		}
-@@ -1466,6 +1581,33 @@ int stty_main(int argc UNUSED_PARAM, cha
- 			continue;
- 		}
- 
-+		param = find_rs485config(arg);
-+		if (param) {
-+			rs485_setconfig = 1;
-+			if (param & param_need_arg)
-+				++k;
-+			switch (param & 0x7F) {
-+				case 1:
-+					rs485conf.flags |= SER_RS485_ENABLED;
-+					break;
-+				case 2:
-+					rs485conf.flags |= SER_RS485_RTS_ON_SEND;
-+					break;
-+				case 3:
-+					rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
-+					break;
-+				case 4:
-+					rs485conf.flags |= SER_RS485_RX_DURING_TX;
-+					break;
-+				case 5:
-+					rs485conf.delay_rts_before_send = xatoul_sfx(argnext, stty_suffixes);
-+					break;
-+				case 6:
-+					rs485conf.delay_rts_after_send = xatoul_sfx(argnext, stty_suffixes);
-+			}
-+			continue;
-+		}
-+
- 		param = find_param(arg);
- 		if (param & param_need_arg) {
- 			++k;
-@@ -1502,9 +1644,11 @@ int stty_main(int argc UNUSED_PARAM, cha
- 			stty_state |= (STTY_require_set_attr | STTY_speed_was_set);
- 			break;
- 		default:
--			if (recover_mode(arg, &mode) == 1)
-+			if (recover_mode(arg, &mode, &rs485conf, 0, rs485_supported) == 1) {
- 				stty_state |= STTY_require_set_attr;
--			else /* true: if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) */{
-+				if (rs485_supported >= 0)
-+					rs485_setconfig = 1;
-+			} else /* true: if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) */{
- 				set_speed_or_die(both_speeds, arg, &mode);
- 				stty_state |= (STTY_require_set_attr | STTY_speed_was_set);
- 			} /* else - impossible (caught in the first pass):
-@@ -1550,5 +1694,10 @@ int stty_main(int argc UNUSED_PARAM, cha
- 		}
- 	}
- 
-+	if (rs485_setconfig) {
-+		if (ioctl (STDIN_FILENO, TIOCSRS485, &rs485conf) < 0)
-+			perror_on_device_and_die("%s: cannot set RS485 options");
-+	}
-+
- 	return EXIT_SUCCESS;
- }


hooks/post-receive
-- 
armadeus




2006	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec (1)
2007	Jan (43)	Feb (8)	Mar (7)	Apr (8)	May (14)	Jun (6)	Jul (4)	Aug (17)	Sep (18)	Oct (19)	Nov (52)	Dec (30)
2008	Jan (6)	Feb (6)	Mar (15)	Apr (22)	May (13)	Jun (11)	Jul (41)	Aug (10)	Sep (14)	Oct (21)	Nov (4)	Dec (66)
2009	Jan (67)	Feb (57)	Mar (90)	Apr (54)	May (64)	Jun (76)	Jul (14)	Aug (18)	Sep (18)	Oct (20)	Nov (15)	Dec (36)
2010	Jan (28)	Feb (25)	Mar (32)	Apr (23)	May (22)	Jun (62)	Jul (36)	Aug (16)	Sep (12)	Oct (20)	Nov (44)	Dec (25)
2011	Jan (36)	Feb (49)	Mar (28)	Apr (38)	May (26)	Jun (52)	Jul (33)	Aug (32)	Sep (19)	Oct (26)	Nov (13)	Dec (32)
2012	Jan (38)	Feb (34)	Mar (91)	Apr (35)	May (31)	Jun (72)	Jul (23)	Aug (13)	Sep (33)	Oct (47)	Nov (18)	Dec (22)
2013	Jan (31)	Feb (22)	Mar (26)	Apr (11)	May (38)	Jun (15)	Jul (37)	Aug (68)	Sep (34)	Oct (11)	Nov (26)	Dec (31)
2014	Jan (60)	Feb (55)	Mar (21)	Apr (31)	May (17)	Jun (35)	Jul (24)	Aug (17)	Sep (11)	Oct (23)	Nov (10)	Dec (23)
2015	Jan (15)	Feb (34)	Mar (46)	Apr (23)	May (12)	Jun (14)	Jul (18)	Aug (22)	Sep (6)	Oct (2)	Nov (1)	Dec (6)
2016	Jan (5)	Feb (7)	Mar (10)	Apr (10)	May (17)	Jun (6)	Jul (4)	Aug (6)	Sep (22)	Oct (8)	Nov (9)	Dec (5)
2017	Jan (11)	Feb (12)	Mar (27)	Apr (9)	May (1)	Jun (5)	Jul (11)	Aug (10)	Sep (6)	Oct (10)	Nov (4)	Dec (6)
2018	Jan (6)	Feb (13)	Mar (9)	Apr (7)	May (10)	Jun (9)	Jul (21)	Aug (13)	Sep (10)	Oct (4)	Nov (6)	Dec (1)
2019	Jan (6)	Feb (2)	Mar (5)	Apr (6)	May (19)	Jun (14)	Jul (18)	Aug (3)	Sep (5)	Oct (7)	Nov (8)	Dec (4)
2020	Jan (10)	Feb (3)	Mar (9)	Apr (7)	May (2)	Jun (18)	Jul (3)	Aug	Sep	Oct (7)	Nov	Dec (1)
2021	Jan (9)	Feb (6)	Mar (4)	Apr (11)	May (7)	Jun (5)	Jul (2)	Aug (4)	Sep (10)	Oct (9)	Nov (5)	Dec
2022	Jan (2)	Feb (12)	Mar (3)	Apr (5)	May (1)	Jun (3)	Jul (2)	Aug (1)	Sep (4)	Oct (4)	Nov (1)	Dec (3)
2023	Jan (5)	Feb (3)	Mar (3)	Apr (2)	May (1)	Jun (3)	Jul (3)	Aug (2)	Sep (1)	Oct (1)	Nov	Dec (4)
2024	Jan (2)	Feb (3)	Mar (8)	Apr (4)	May (1)	Jun (13)	Jul (7)	Aug (1)	Sep (6)	Oct (5)	Nov (11)	Dec (7)
2025	Jan (3)	Feb (1)	Mar (6)	Apr (4)	May (4)	Jun (1)	Jul (1)	Aug (7)	Sep (4)	Oct (4)	Nov (4)	Dec (1)
2026	Jan (3)	Feb (7)	Mar (3)	Apr (1)	May (6)	Jun (3)	Jul (1)	Aug	Sep	Oct	Nov	Dec

armadeus-commitlog Mailing List for armadeus (Page 62)

armadeus-commitlog — Armadeus GIT commit logs