Components in pcb

Dew Controller Feature Rich

Brought to you by: brownrb

Components in pcb

Forum: General Discussion

Creator: Mark Paolo

Created: 2019-11-30

Updated: 2019-12-01

Mark Paolo - 2019-11-30

Hi Robert,

Can you please mention which components placed where? I found out 0.33 uf and 0.1uf capacitor. Correctly finding components placements using schematic confuses me.
I have attached the photo.

Regards,

v307BT-All-1.png

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

brownrb - 2019-12-01

Why not use the gerber files instead? The boards cost next to nothing from easyeda

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

brownrb - 2019-12-01

THIS

v307BT-All-1-Cropped-Parts.png

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Mark Paolo - 2019-12-01

Thanks for the updated photo. When the project is DIY then i prefer to make by hands. If i order it online i'll loose interest of being DIY.

Please don't mind, i want to know that red lines on the photo are used as a jumper wire in top side? Am i correct?

Thanks again.

Last edit: Mark Paolo 2019-12-01

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.