Hi Joe
Its actually designed so that can download only what you need. SourceForge does not support GitHub type downloads.
Please download and read the pdf first.
Decide on whether you want v2 or v3.Recommended v3 as this is basically the same but only a few extra components
Decide on whether you want a stripboard layout or if you are going to do the PCB option
If stripboard, download those stripboard files and schematic and layout
If PCB, download the PCB files and schematic and layout
Download windows app
Download firmware file and any needed libraries
Download any testprograms later if you run into issues.
Cheers
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I really wanted to download all at one go so that I could figure out what I needed while offline (airplane).
It seems that even knowing what you need, there are a lot of individual files. I've never used Sourceforge for distributing anything, will they really not allow you to include a zip with everything?
J
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Ok, your point is taken, but for a moment please, think about the logistics of doing that on a very regular basis. Its just too hard for me to do that, everytime I make a change might involve making 3-4-5-6 different zip files. I do this in my spare time, there is no money in this at all, it just exceeds the capacity I have.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Please post pictures and comments of your build here so others may learn from you too,
Best regards
Robert
Is there a way of downloading all the files in a single zip or am I missing something obvious?
Thanks,
J
Hi Joe
Its actually designed so that can download only what you need. SourceForge does not support GitHub type downloads.
Please download and read the pdf first.
Decide on whether you want v2 or v3.Recommended v3 as this is basically the same but only a few extra components
Decide on whether you want a stripboard layout or if you are going to do the PCB option
If stripboard, download those stripboard files and schematic and layout
If PCB, download the PCB files and schematic and layout
Download windows app
Download firmware file and any needed libraries
Download any testprograms later if you run into issues.
Cheers
Robert
I really wanted to download all at one go so that I could figure out what I needed while offline (airplane).
It seems that even knowing what you need, there are a lot of individual files. I've never used Sourceforge for distributing anything, will they really not allow you to include a zip with everything?
J
Hi Joe
Ok, your point is taken, but for a moment please, think about the logistics of doing that on a very regular basis. Its just too hard for me to do that, everytime I make a change might involve making 3-4-5-6 different zip files. I do this in my spare time, there is no money in this at all, it just exceeds the capacity I have.
I feel your pain I guess, I realise I'm only downloading once....
Thanks,
Joe