I am playing with the idea of making for me a simplified version of myDewController. I just only need 2 dew straps or even better, one strap for the guide scope and one 12V fan for my newton scope main mirror to be able to deal with boundary layer as it is a better solution to deal with dew on newtons.
My question is if the original program would work with a hardware simplified version with just two 12V outputs, two DS waterproof probes, the HTU sensor and without the LCD, the internal fan and its temp probe.
Best Regards.
Mario.
PD: I am also playing with the idea of merging into one PCB both of your projects myFocuser and myDewController to reduce the wires around the scope.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear Bob,
I am playing with the idea of making for me a simplified version of myDewController. I just only need 2 dew straps or even better, one strap for the guide scope and one 12V fan for my newton scope main mirror to be able to deal with boundary layer as it is a better solution to deal with dew on newtons.
My question is if the original program would work with a hardware simplified version with just two 12V outputs, two DS waterproof probes, the HTU sensor and without the LCD, the internal fan and its temp probe.
Best Regards.
Mario.
PD: I am also playing with the idea of merging into one PCB both of your projects myFocuser and myDewController to reduce the wires around the scope.
There is the 2 channel version
https://sourceforge.net/projects/arduinonanodewcontrollerpro/files/v200/
Last edit: brownrb 2018-01-15