problem with V2 - keeps closing com port saying disconnect button clicked

[clive stachon]

Hi Robert ,

Have been using V1 no problem. Decided to give V2 a try using existing set up that works fine. Come across a problem - begins ok and moves back and forth but then stops and disconnects from Com port. I have not clicked the disconnect buttun and I have tried this a number of times and get the same problem. As I say V1 works ok but uploading new V2 firmware and using Win V2 program causes the above problem.

ReceiveString(): =START=========================================================
12/6/2016 5:09:43 PM: ReceiveString: Command retcmd = F
12/6/2016 5:09:43 PM: ReceiveString: Buffer recbuf = FmyFocuser2_ULN2003
2.5.0M#
12/6/2016 5:09:43 PM: ReceiveString: Value retstr = myFocuser2_ULN2003
2.5.0M
12/6/2016 5:09:43 PM: ReceiveString raw response for getfirmware was: FmyFocuser2_ULN2003
2.5.0M#
12/6/2016 5:09:43 PM: Controller version: myFocuser2_ULN2003
2.5.0M
rest of log removed

12/6/2016 5:13:00 PM: Disconnect: Back from GetIsMoving
12/6/2016 5:13:00 PM: Disconnect: ismoving = 0
12/6/2016 5:13:00 PM: disableall(): =START=========================================================
12/6/2016 5:13:00 PM: disableall(): =END===========================================================
12/6/2016 5:13:00 PM: DisconnectBtn_Click: Disconnecting
12/6/2016 5:13:00 PM: Disconnect(): =END===========================================================
12/6/2016 5:13:00 PM: gotopreset1(): =END===========================================================

[brownrb]

Hi Clive

I would need the whole log file. Some calls are nested so I suspect the issue arose somewhere between 5:09 and 5:13 in that something went astray and Disconnect was called because of it.

I also need name of firmware file.
Please send to me at my yahoo account brown_rb

[clive stachon]

Have sent info to your Yahoo Email account but just in case here it is again

firmware = myfocuser2_uln2003.2.5.0M using Window Program MyfocuserPro2 2.3.5.1 for testing. I have tried the Ascom driver yet. Motor = std 28byJ-48 using unmodified controller board that came with Stepper. No LCD,No LED's nothing.

Windows 10 Pro used ,USB2.0,Cable=1m

Log Attached log.

Test procudure A) .was Compile and upload V1 to Nano test using V1 program Myfocuserpro V 1.7.6.5 - works no problem.
Test Procedure B). Was compile and upload myfocuser2_uln2003.2.5.0M to nano. Test using MyfocuserPro2 V 2.3.5.1

? can I have V1 and V2 on the same machine(PC).