brownrb - 2019-02-02

You are most welcome, there are lots of experts here if you run into any issues, and with so many users having built their own I am sure they can help you if you experience any issues

Regards
Robert

On Sat, 2/2/19, Jon Garrod jongarrod@users.sourceforge.net wrote:

Subject: [arduinoascomfocuserpro2diy:discussion] Myfocuserpro for Indi
To: general@discussion.arduinoascomfocuserpro2diy.p.re.sourceforge.net
Date: Saturday, February 2, 2019, 11:23 PM

Hi Robert
Thanks for the confirmation. Just ordering all the bit
and pieces now. I am going to build 2, one for a little
refractor and one for my reflector.

I think I am going with the Nema17PG5 as the focusser will
be carrying a DSLR and later a ASI1600 with focus wheel.
This should future proof me. My only concern is the weight.
My little refracter is not the issue but I Iove using my
200mm reflector on a HEQ5 mount which is getting close to
the limits. I have converted the finderscope to a guidescope
to save weight but I think as long as I balance it carefully
and don't try to use it in high winds I should be OK.
The spot I use in my backyard is very sheltered.
Really looking forward to this project as it combines a
couple of skills that I have not used in a long time,
electronics and C. Thanks for puting this all together!
Cheers
Jon

Myfocuserpro
for Indi

Sent from sourceforge.net because you indicated interest
in https://sourceforge.net/p/arduinoascomfocuserpro2diy/discussion/general/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/