Sorry it's my first post.....and i've a poor english.
I want to build a arduino focuser pro2 without LCD,TEMP. I just want to control focuser by PC and add 2 push buttons, no more.
Is it possible to find the graph and the sketch to wire the arduino and Easydriver without the LCD, buzzer, reset switch.... I'm lost in all those wires and i'm not a good technician in electricity.
Thanks a lot
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
oopss
Last edit: JoBarTeam 2016-03-11
Hello,
Sorry it's my first post.....and i've a poor english.
I want to build a arduino focuser pro2 without LCD,TEMP. I just want to control focuser by PC and add 2 push buttons, no more.
Is it possible to find the graph and the sketch to wire the arduino and Easydriver without the LCD, buzzer, reset switch.... I'm lost in all those wires and i'm not a good technician in electricity.
See my post on the other myfocuserpro forum
https://sourceforge.net/p/arduinofocuscontrollerpro/discussion/general/thread/27dbaec2/?limit=25#23d3