I am a bit confused about the wiring of the home switch. On the PDF documentation, the Ardiono code, and the schematic (Schematic-WiFi-Rev3-2), the home position switch is wired to D12. However, in the PCB layout (Wifi_Ref3-2-All) it appears to be wired to D13. Is that expected?
Thanks,
KVR
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes and I recall how that happened. It was difficult to change the layout of the WifiRev3-2 board to use D12 so I used D13 with the intent to change it later. All the code uses D12.
I will post a renewed PCB later today which is the easier fix. That means all the schematics/code/pdf can remain unchanged.
Cheers
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Many thanks for spotting the error. Okay, I have uploaded a new wifi pdf, a new schem and new pcb layout, so that the home position is D12 in all places. I think the firrmware is ok (always uses D12) . If you notice any further erros please let me know,
Hello Robert,
I am a bit confused about the wiring of the home switch. On the PDF documentation, the Ardiono code, and the schematic (Schematic-WiFi-Rev3-2), the home position switch is wired to D12. However, in the PCB layout (Wifi_Ref3-2-All) it appears to be wired to D13. Is that expected?
Thanks,
KVR
Yes and I recall how that happened. It was difficult to change the layout of the WifiRev3-2 board to use D12 so I used D13 with the intent to change it later. All the code uses D12.
I will post a renewed PCB later today which is the easier fix. That means all the schematics/code/pdf can remain unchanged.
Cheers
Robert
Hi KVR,
Many thanks for spotting the error. Okay, I have uploaded a new wifi pdf, a new schem and new pcb layout, so that the home position is D12 in all places. I think the firrmware is ok (always uses D12) . If you notice any further erros please let me know,
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WIFI/Documentation/myFocuserPro2Wifi.pdf/download
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WIFI/PCB/Wifi_Rev3-2-All.png/download
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WIFI/PCB/SolderSide-Wifi-Rev3-2.bmp/download
Cheers
R
Hi Robert,
Thanks for the clarification and updates. I'll let you know once my focuser is up and ready!
Regards,
KVR