hello guys. can someone tell me if is problem in PC? im running on win11. with win10 on old laptop i dont have this problem and focuser works well. now i buy dell laptop and i cant connecd focuser. ascom driver is same like on old lenovo.
I cannot offer support for "older" versions. But I can help with issues for the latest versions. Please realize that a lot of things have been changed and fixed between "older" and the latest versions.
If you want to remain using the versions on your computer, that is ok, and the only things I am able to suggest are (unckeck reset controller on connect, and check Controller is a micro - but if that doesnt work then it does not look promising).
I suggest the following
1. Reprogram the controller with firmware version 328
2. Use control panel to remove the ASCOM driver
3. Use Control panel to remove the Windows app v2491
Install the latest ACOM driver v300
Install the latest windows app 2506
If you do decide to upgrade and then have issues, there are log options in both the Windows app (Logging tab, check Messages) and the ascom driver (check Logging on Connection tab). Once ;pgging is enabled, try to connect. If the connection fails, please send me the log files)
Just a work of caution:
The new windows app should not be used on any firmware that is less than 328
The ascom driver should not be used on any firmware that is less than 328
And of course, firmware 328 should not be used on any old Windows app or ASCOM driver
Regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hello guys. can someone tell me if is problem in PC? im running on win11. with win10 on old laptop i dont have this problem and focuser works well. now i buy dell laptop and i cant connecd focuser. ascom driver is same like on old lenovo.
Hi
I cannot offer support for "older" versions. But I can help with issues for the latest versions. Please realize that a lot of things have been changed and fixed between "older" and the latest versions.
If you want to remain using the versions on your computer, that is ok, and the only things I am able to suggest are (unckeck reset controller on connect, and check Controller is a micro - but if that doesnt work then it does not look promising).
I suggest the following
1. Reprogram the controller with firmware version 328
2. Use control panel to remove the ASCOM driver
3. Use Control panel to remove the Windows app v2491
Install the latest ACOM driver v300
Install the latest windows app 2506
Firmware
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ARDUINO%20FIRMWARE/Firmware_myFP2_328.zip/download
ASCOM Driver
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/ASCOM%20DRIVERS/myFP2ASCOMSetup300.exe/download
Windows app
https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/WINDOWS/MainApp/myFocuserPro2_2_5_0_6.zip/download
If you do decide to upgrade and then have issues, there are log options in both the Windows app (Logging tab, check Messages) and the ascom driver (check Logging on Connection tab). Once ;pgging is enabled, try to connect. If the connection fails, please send me the log files)
Just a work of caution:
The new windows app should not be used on any firmware that is less than 328
The ascom driver should not be used on any firmware that is less than 328
And of course, firmware 328 should not be used on any old Windows app or ASCOM driver
Regards
Robert