Hi I can see in the drawing, that the PPTC fuse is not soldered directly on the board. My question is why, and where should it go Thanks for your help
Hi Mateo Yes u can solder this and buzzer etc direct to the PCB ig that is what you want.
The schematic shows how things are connected. The Layout shows where those components are on the PCB.
Regards Robert
Hi Mateo
Thenlocation may vary dependingh on what board you have In general it will be near the on-off switch and the 3A diode 1N5408 ( or 10A10) For example I attach a schematic and board
Log in to post a comment.
Hi
I can see in the drawing, that the PPTC fuse is not soldered directly on the board. My question is why, and where should it go
Thanks for your help
Hi Mateo
Yes u can solder this and buzzer etc direct to the PCB ig that is what you want.
The schematic shows how things are connected. The Layout shows where those components are on the PCB.
Regards
Robert
Hi Mateo
Thenlocation may vary dependingh on what board you have
In general it will be near the on-off switch and the 3A diode 1N5408 ( or 10A10)
For example I attach a schematic and board
Regards
Robert
Last edit: brownrb 2024-04-10