Hardware

Introduction

This page describes using the library as it is with its currently supported devices and how to add support for another device.

Connections

SYNC is on OCR1A and AUDIO is on OC2A

MCU
SYNC
VIDEO
AUDIO
Arduino
SYNC
VIDEO
AUDIO

m168,m328
B 1
D 7
B 3
NG,Decimila,UNO
9
7
11

m1280,m2560
B 5
A 7
B 4
Mega
11
A7(D29)
10

m644,m1284p****
D 5
A 7
D 7
sanguino
13
A7(D24)
8

AT90USB1286
B 5
F 7
B 4
--
--
--
--
There are some timing issues with the m1284p, may be related to sanguino core.

Adding Additional AVR Devices

[Anonymous]

Originally posted by: 612pe...@gmail.com

Is there support for the Teensy (Mega32u4) from pjrc.com?

[Anonymous]

Originally posted by: rasmusj...@gmail.com

Can you change the audio output for arduino mega 2560? Because pin 10 is for the ethernet shield and interrupts audio output.

[Anonymous]

Originally posted by: 93star...@gmail.com

For anyone that cannot get TVoutBeta1.zip to upload to arduino becoz of stupid error. I found a little trick took me a few day of endless google search with no luck .after messing around with it got it to work on

1. arduino Uno R3 2. same circuit connection listed above 3. rca cable attached to 55" tv

[Anonymous]

Originally posted by: 93star...@gmail.com

download and extract (TVoutBeta1.zip) to desktop. then cut & paste folders (pollserial & TVoutfonts) to the (TVout) folder. next open up (TVoutfonts) folder and copy & paste all the file to the (TVout) folder ; but DO NOT delete (tvoutfonts) folder keep it all in there.

open up arduino 1.0.3 program : click >>File >> Examples>> TVout >> DemoNTSC

now in sketch screen you will notice the "TVout TV;" changes color to red from black. bingo! now hit upload button and connect to tv after.

tried it 6x and it works everytime .. have fun!!!

[Anonymous]

Originally posted by: prabat...@gmail.com

For Arduino Pro 3.3V/8Mhz with ATMEGA328P, Sync Resistor = 680 Ohm Signal Resistor = 270 Ohm

[Anonymous]

Originally posted by: computo...@yahoo.com

Wish the problem with the ehternet and tv.out incompatibility would be fixed or at least publish a fix.

[Anonymous]

Originally posted by: bdi...@gmail.com

Does this work for the Intel Galileo?

[Anonymous]

Originally posted by: rob.d.jo...@gmail.com

anyone know a good way to change the sync pin on an arduino to another pin? i looked through the code but could only find where timer2 is defined not timer 1 which is sync right.

[Anonymous]

Originally posted by: allenhuf...@gmail.com

How is audio hooked up?

[Anonymous]

Originally posted by: swat5hi...@gmail.com

not working with me > i have Toshiba TV And arduino mega 2560 , i Connected all right , vid to sync and video (A7 & 11) , Help me please

[Anonymous]

Originally posted by: swat5hi...@gmail.com

i'm not sure the pin 11 is inoperative , so i want to change the 11 pin to any one of pins except 0 to 13 because this pins maybe broken , Thank You

[Anonymous]

Originally posted by: pistoler...@gmail.com

Hi,

I´m not quite sure if this is possible or already done...

Is it possible to include an Arduino Due compatibility?

thanks for the good work!!

[Anonymous]

Originally posted by: mackh...@gmail.com

Will this work on a regular flat screen LCD TV with RCA (Composite in)? I don't have an older TV/screen to test this with but only the TV in the living room.

Thanks.

[Anonymous]

Originally posted by: jdimase...@student.egsd.net

What are the pins for an ATmega32u4? Much thanks