Hi, as I am not comfortable with soldering, would it be possible to use mounting board for Arduino Nano and for DRV8825? With reference to what is described for myFP2 solderless, are those components good for myRotator? Of course, I will use the correct schematic.
Thank you.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
can you the "myRotator" write for Indilibs?
I use Stellarmate and this use only Indilibs driver.
A simple implementation would be enough for me, where you could simply turn the rotator in two directions.
Best Regards
Andy
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Andy
If you know of anyone who has written an INDI driver for a rotator before, they should contact me, and I would be happy to answer any of their questions. I also do not use INDI or Linux based apps.
I do not have the time to do that as updates for mysqm+ myfp2 myfp2M myFP2N myFP2ESP32 myESP32DB are under way at present, and myDCPESP32 is slated after that.
Just not enough hours in the day, already working insane hours just to keep progessimg. I know this in not the answer you want to hear, but I cannot add more to an already overburdened coder (myself).
Regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm glad you answered at all. I understand that, of course,
there really aren't enough hours in the day. I'll see if I can find
someone who can compile it for me. Thank you for your release.
Greetings from the other end of the world! :-)
Andy
Hi Andy
If you know of anyone who has written an INDI driver for a rotator before,
they should contact me, and I would be happy to answer any of their
questions. I also do not use INDI or Linux based apps.
I do not have the time to do that as updates for mysqm+ myfp2 myfp2M
myFP2N myFP2ESP32 myESP32DB are under way at present, and myDCPESP32 is
slated after that.
Just not enough hours in the day, already working insane hours just to
keep progessimg. I know this in not the answer you want to hear, but I
cannot add more to an already overburdened coder (myself).
Good morning, very interesting project " my rotator". Please do you know what is PRG SW in the project? I'm move the first steps in elettronics. Thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi, as I am not comfortable with soldering, would it be possible to use mounting board for Arduino Nano and for DRV8825? With reference to what is described for myFP2 solderless, are those components good for myRotator? Of course, I will use the correct schematic.
Thank you.
Hi Alessio
yes you can, I cannot think of a reason why it would not work, drop me an email if you get stuck.
Regards
Robert
Hello Mr. Brown,
can you the "myRotator" write for Indilibs?
I use Stellarmate and this use only Indilibs driver.
A simple implementation would be enough for me, where you could simply turn the rotator in two directions.
Best Regards
Andy
Hi Andy
If you know of anyone who has written an INDI driver for a rotator before, they should contact me, and I would be happy to answer any of their questions. I also do not use INDI or Linux based apps.
I do not have the time to do that as updates for mysqm+ myfp2 myfp2M myFP2N myFP2ESP32 myESP32DB are under way at present, and myDCPESP32 is slated after that.
Just not enough hours in the day, already working insane hours just to keep progessimg. I know this in not the answer you want to hear, but I cannot add more to an already overburdened coder (myself).
Regards
Robert
Hello Robert,
I'm glad you answered at all. I understand that, of course,
there really aren't enough hours in the day. I'll see if I can find
someone who can compile it for me. Thank you for your release.
Greetings from the other end of the world! :-)
Andy
Am Do., 18. Aug. 2022 um 16:35 Uhr schrieb brownrb brownrb@users.sourceforge.net:
Good morning, very interesting project " my rotator". Please do you know what is PRG SW in the project? I'm move the first steps in elettronics. Thanks
PRG SW
Program Switch
is an on-off slide switch
Purpose
When closed,
if a client connects via ascom/windows/linux then the controller will not reboot
Upload of new firmware disabled
When open,
if a client connects via ascom/windows/linux then the controller will reboot
Upload of new firmware is ok