Built the DRV8825_M-MT-F-BT-12 about 3 years ago, was always happy until a lighting strike somewhere close by had them disabled, so I built some more.
Not paying enough attention I just kept the J12 jumper in place and, in hindsight surprisingly , I was able to upload verify AND run the focuser (MFP2) without a hitch
What am I missing???
Thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Likely I am just confused….
Built the DRV8825_M-MT-F-BT-12 about 3 years ago, was always happy until a lighting strike somewhere close by had them disabled, so I built some more.
Not paying enough attention I just kept the J12 jumper in place and, in hindsight surprisingly , I was able to upload verify AND run the focuser (MFP2) without a hitch
What am I missing???
Thanks!
seems that confusion is catching - now I am confused.
J12 BT is used to drive Bluetooth. Are you referring to J12 for On/Off?
I know, there are two J12 headers. Just so darn busy have not had the time to change it
This is the myRotator discussion correct?
regards
Robert
Last edit: brownrb 2023-07-03