The firmware is still in Beta. The files in each folder need to be downloaded for whatever build you do. Some of the files come from other sources such as Adafruit etc. The files in the sanme folder as arduino firmware need to be there - they have been modified and are not the original library you might download from Github or the authors website. They were modified to remove the errors in working with Arduino IDE v1.6.11 and if you replace them with any orginal files, the code will not work.
I will be adding updated firmware over the next few weeks as I get the chance to test and verify each firmware (still waiting on a few parts to arrive).
Cheers
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
6 September 2016
Today have uploaded the latest firmware and schematics and test files and strip board layouts. Also screen shot of prototype. Have tested most and it works!!
So this is test release. It should all work now. Any issues let me know.
Cheers
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
7 Sept 2016. New PDF showing connection to astroplanner, eqmod etc.
New firmware v004, please delete any previous firmware files including libraries or support files.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Finished the prototype case today, made a mess of the measurements and I did not have any superglue so used heat gun instead, bit of a mess but it works,
01-01-2019 I have added the myGPSWIN application [Windows only] that Andreas requested and has been kindly testing for us (much appreciated). The new PDF explains briefly how this is used and what it does.
Regard
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The firmware is still in Beta. The files in each folder need to be downloaded for whatever build you do. Some of the files come from other sources such as Adafruit etc. The files in the sanme folder as arduino firmware need to be there - they have been modified and are not the original library you might download from Github or the authors website. They were modified to remove the errors in working with Arduino IDE v1.6.11 and if you replace them with any orginal files, the code will not work.
I will be adding updated firmware over the next few weeks as I get the chance to test and verify each firmware (still waiting on a few parts to arrive).
Cheers
Robert
6 September 2016
Today have uploaded the latest firmware and schematics and test files and strip board layouts. Also screen shot of prototype. Have tested most and it works!!
So this is test release. It should all work now. Any issues let me know.
Cheers
Robert
7 Sept 2016. New PDF showing connection to astroplanner, eqmod etc.
New firmware v004, please delete any previous firmware files including libraries or support files.
30-Sept-2016 Video released
https://youtu.be/rBSa5HgBH7A
Finished the prototype case today, made a mess of the measurements and I did not have any superglue so used heat gun instead, bit of a mess but it works,
5th March 2017 Update to OLED code and support files.
21 March 2017 Major changes to OLED code
02April2017 New Yahoo support group at https://groups.yahoo.com/neo/groups/myArduinoDIY/info for the myDCFocuser, myDewController, myFocuser, myGPS, mySQM and mySolar products.
01-01-2019 I have added the myGPSWIN application [Windows only] that Andreas requested and has been kindly testing for us (much appreciated). The new PDF explains briefly how this is used and what it does.
Regard
Robert
23-April-2019 - Added gerber files so can now order PCB at low cost from EasyEDA