From: Geoff W. <geo...@id...> - 2009-02-19 14:07:36
|
Hi I am having trouble setting up aprsd, IU have it running and it receives pakets but I can't get it to send packets to server, new to aprsd and also to linux, any help appreciated. This is the output when I run as a program. geoff@geoff-desktop:~$ aprsd # aprsd 2.2.5-13 Oct 2002 aprsd group Read 0 items from /var/log/aprsd/history.txt Reading /etc/aprsd/aprsd.conf servercall vk2sh MyCall VK2SH MyLocation Lake Macquarie,NSW MyEmail geo...@id... MaxUsers 1 MaxLoad 10000000 NetBeacon 10 !3254.43SI15137.70E& APRS Server ackrepeats 2 ackrepeattime 5 expire 35 aprspath APRS v WIDE2 rf-allow no filterNoGate yes history-allow yes Trace no logAllRF yes aprsPass yes TncPktSpacing 1500 igateMyCall no ConvertMicE no pass 24570 Server australia.aprs2.net 14579 server-sr rawtncport 14580 localport 14579 mainport 10151 mainport-nh 10152 linkport 1313 msgport 1314 udpport 1315 sysopPort 14500 httpport 14501 ipwatchport 14502 errorport 14503 omniport 14600 NetBeacon is: vk2sh>APD225,TCPIP*:! 3254.43SI15137.70E& APRS Server APRS packet path = APRS v WIDE2 TNC com port not defined. Internet to RF data flow is DISABLED UDP Server listening on port 1315 nIGATES=1 igate0=australia.aprs2.net Connecting to IGATEs and Hubs now... Server Started NetBeacon every 10 minutes : vk2sh>APD225,TCPIP*:!3254.43SI15137.70E& APRS Server MYCALL set to: VK2SH IGATE Login: australia.aprs2.net VK2SH 24570 Connected to australia.aprs2.net 14579 ** No data from TNC during previous 2 minutes ** # Server Up Time = 1 minute 61 Total TNC packets = 0 UDP stream rate = 0 bits/sec Msg stream rate = 0 bits/sec TNC stream rate = 0 bits/sec User stream rate = 0 bits/sec Hub stream rate = 0 bits/sec Full stream rate = 0 bits/sec Msgs gated to RF = 0 Connect count = 0 Users = 1 Peak Users = 0 Server load = 0 bits/sec History Items = 0 aprsString Objs = 0 Items in InetQ = 0 InetQ overflows = 0 TncQ overflows = 0 conQ overflows = 0 charQ overflow = 0 Hist. dump aborts = 0 all help appreciated Geoff VK2SH |