Como desligar o alarme?

[Bráulio Barros de Oliveira]

Bom dia,

Não vejo a opção de desligar o beep do alarme no apctest. Como fazer isso?

att,
bráulio

~/P/o/Review-collector ❯❯❯ sudo apctest
2019-09-11 08:05:59 apctest 0.8.21 (May 10 2019) archlinux
Checking configuration ...
sharenet.type = Network & ShareUPS Disabled
cable.type = Custom Cable Simple
mode.type = BRAZIL UPS Driver
Setting up the port ...
Doing prep_device() ...

You are using a APC Brazil type, so I'm entering BRAZIL test mode
Hello, this is the apcctrl Cable Test program.
This part of apctest is for testing APC-Microsol Brazil.
Please select the function you want to perform.

1) Query the UPS for all known values
2) Query for last events
3) Query the internal UPS clock and scheduler
4) Schedule the UPS to shutdown in 1 minutes and restart 1 minute later.
5) Cancel Schedule. Do not shutdown or start
6) Test set input turn off
7) Test set input Turn on
8) Test battery health
9) Generate data of timeleft functions
Q) Quit

[Wagner Popov dos Santos]

Bom dia, Bráulio.

Eu não conheço nenhum comando que deva ser enviado para o nobreak
solicitando isso.

Você já viu isso acontecendo?

Existe um comando que permite solicitar o desligamento do nobreak quando
ele não detectar nenhuma carga. Essa é, ou deveria ser, a operação padrão
do apcctrl.

Att,
Wagner

Em qua, 11 de set de 2019 08:45, "Bráulio Barros de Oliveira" brauliobo@users.sourceforge.net escreveu:

Bom dia,

Não vejo a opção de desligar o beep do alarme no apctest. Como fazer isso?

att,
bráulio

~/P/o/Review-collector ❯❯❯ sudo apctest
2019-09-11 08:05:59 apctest 0.8.21 (May 10 2019) archlinux
Checking configuration ...
sharenet.type = Network & ShareUPS Disabled
cable.type = Custom Cable Simple
mode.type = BRAZIL UPS Driver
Setting up the port ...
Doing prep_device() ...

You are using a APC Brazil type, so I'm entering BRAZIL test mode
Hello, this is the apcctrl Cable Test program.
This part of apctest is for testing APC-Microsol Brazil.
Please select the function you want to perform.

1) Query the UPS for all known values
2) Query for last events
3) Query the internal UPS clock and scheduler
4) Schedule the UPS to shutdown in 1 minutes and restart 1 minute later.
5) Cancel Schedule. Do not shutdown or start
6) Test set input turn off
7) Test set input Turn on
8) Test battery health
9) Generate data of timeleft functions
Q) Quit

---

Como desligar o alarme?

---

Sent from sourceforge.net because you indicated interest in <
https://sourceforge.net/p/apcctrl/discussion/general/>

To unsubscribe from further messages, please visit <
https://sourceforge.net/auth/subscriptions/>