Re: [Amforth] Problem loading hex file into 328p

[Tristan W. <ho...@tj...>]

Hello Michael,

It is also worth checking your communication settings are 38000 8N1
and that flow control is not set to hardware (RTS/CTS), unless your
serial connection is wired that way.

kind regards,

Tristan

On 20Apr19 11:47, Jan Kromhout via Amforth-devel wrote:
> Hello,
> 
> I use these with a pololu programmer v2.1
> 
> Laad de nieuwe versie:
> avrdude -p m328p -c avrispv2 -P /dev/tty.usbmodem00230362 -U efuse:w:0xFF:m -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m -U flash:w:amforth.hex:i -U eeprom:w:amforth.eep.hex:i
> 
> And it works great, no problems at all.
> 
> 
> Cheers,
> 
> Jan
> 
> 
> 
> > Op 20 apr. 2019, om 00:12 heeft Michael Picco <mp...@pl...> het volgende geschreven:
> > 
> > Hello,
> > 
> > I've bought some extra atmega328P-U parts and attempted to install the Amforth files using the AVR Pocket Programmer from Sparkfun. The first couple of attempts ended in failure and I got nothing back from the Arduino Uno when hooking it up using Putty on my Linux box.  I was able to use the programmer to reinstall the optiboot and was successful, so it appears that the programmer is doing as intended.
> > 
> > Does the Amforth loading procedure involve setting the fuses?
> > 
> > The command line being used is: avrdude -p m328p -c usbtiny -U flash:w:uno.hex -U eeprom:w:uno.eep.hex -v
> > 
> > Any help is greatly appreciated!
> > 
> > Kind regards,
> > 
> > Michael
> > 
> > K6MLE
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Amforth-devel mailing list for http://amforth.sf.net/
> > Amf...@li...
> > https://lists.sourceforge.net/lists/listinfo/amforth-devel
> 
> 
> 
> _______________________________________________
> Amforth-devel mailing list for http://amforth.sf.net/
> Amf...@li...
> https://lists.sourceforge.net/lists/listinfo/amforth-devel
>