Re: [Amforth] Problem loading hex file into 328p

[Michael P. <mp...@pl...>]

Thank you Jan!

I have a Pololu programmer arriving on Monday.  I will give this a try 
with the Pocket Programmer as well.

Kind regards,
Michael
K6MLE



On 4/20/2019 2:47 AM, Jan Kromhout via Amforth-devel wrote:
> Hello,
>
> I use these with a pololu programmer v2.1
>
> Laad de nieuwe versie:
> avrdude -p m328p -c avrispv2 -P /dev/tty.usbmodem00230362 -U efuse:w:0xFF:m -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m -U flash:w:amforth.hex:i -U eeprom:w:amforth.eep.hex:i
>
> And it works great, no problems at all.
>
>
> Cheers,
>
> Jan
>
>
>
>> Op 20 apr. 2019, om 00:12 heeft Michael Picco <mp...@pl...> het volgende geschreven:
>>
>> Hello,
>>
>> I've bought some extra atmega328P-U parts and attempted to install the Amforth files using the AVR Pocket Programmer from Sparkfun. The first couple of attempts ended in failure and I got nothing back from the Arduino Uno when hooking it up using Putty on my Linux box.  I was able to use the programmer to reinstall the optiboot and was successful, so it appears that the programmer is doing as intended.
>>
>> Does the Amforth loading procedure involve setting the fuses?
>>
>> The command line being used is: avrdude -p m328p -c usbtiny -U flash:w:uno.hex -U eeprom:w:uno.eep.hex -v
>>
>> Any help is greatly appreciated!
>>
>> Kind regards,
>>
>> Michael
>>
>> K6MLE
>>
>>
>>
>>
>> _______________________________________________
>> Amforth-devel mailing list for http://amforth.sf.net/
>> Amf...@li...
>> https://lists.sourceforge.net/lists/listinfo/amforth-devel
>
>
> _______________________________________________
> Amforth-devel mailing list for http://amforth.sf.net/
> Amf...@li...
> https://lists.sourceforge.net/lists/listinfo/amforth-devel
>