Re: [Amforth-devel] Progress and More Difficulties with Hello World exercise

[<ken...@al...>]

My thanks to all who worked on this problem.  I have had an almost
identical problem on a low cost arduino clone, the BBB by Modern Device.
 It uses a ceramic resonator rather than a crystal, so I expect the
clock frequency to be a little off.  I'll know whether that is the
problem when I solder up one with a crystal instead.

Good trouble shooting.  You displayed more patience than I did.

Ken

On Sun, 27 Mar 2011 01:55 +0000, "Marcin Cieslak" <sa...@sa...>
wrote:
> >> D Nyberg <dny...@at...> wrote:
> > entered "1 1 + ." I think the error was because I am using tera term, 
> > which sends a whole line at once. Combine that with the imperfect clock 
> > setting, and I think the atmel uart saw unprintable characters by byte 6 
> > or 7 in a string because of timing problems. Or possibly it's still set 
> > to polled serial (I set that a while ago to reduce variables, when I was 
> > having trouble getting it to run at all); the pc may be overruning 
> > characters. Anything I did in 4 or  5 characters worked ok, anything 6 
> > or more failed. Now that I have adjusted the clock value, I'm able to 
> > enter long lines. Sneaky problem, huh? But I think it's fixed now.
> 
> Thank you, too, since sometimes those problems pop up in a while,
> now we have a solution. 
> 
> //Marcin
> 
> 
> ------------------------------------------------------------------------------
> Enable your software for Intel(R) Active Management Technology to meet
> the
> growing manageability and security demands of your customers. Businesses
> are taking advantage of Intel(R) vPro (TM) technology - will your
> software 
> be a part of the solution? Download the Intel(R) Manageability Checker 
> today! http://p.sf.net/sfu/intel-dev2devmar
> _______________________________________________
> Amforth-devel mailing list
> Amf...@li...
> https://lists.sourceforge.net/lists/listinfo/amforth-devel
>