Re: [Alsa-user] USB sound device crashes: timeout: still 4 active urbs
Brought to you by:
perex
From: Bill U. <un...@ph...> - 2004-03-09 20:08:03
|
On Tue, 9 Mar 2004, Stuart Pook wrote: > Hi, I'm getting these crashes about once a day. The music just stops fo= r > no obvious reason. I normally have to reboot to get sound working agai= n. I would not reboot, but just try to stop and start the usb bus.=20 Eg on Mandrake, edit the /etc/init.d/usb file and make sure that the stop option actually does bring down the usb bus. (In some versions this is commented out). Then do=20 service usb restart. instead of rebooting and see if that helps.=20 This does not solve your problem, but at least restarting the usb bus is much faster than rebooting. > I'm using > Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:= 41:49 2004 UTC). > Compiled on Feb 21 2004 for kernel 2.6.3-1-686. >=20 > I have an Audiotrak Maya EX7 USB sound device connected via an ABSoft > indigo Mini USB 1.1 hub to a SiS 7001 USB controller on my M747 > motherboard. I don't have any other USB devices. The USB controller > has irq 9 (not shared). >=20 > Does anyone have an idea on how I can make these crashes stop? >=20 > My kern.log says >=20 > Mar 8 23:35:15 kooka kernel: 5:1:1: usb_set_interface failed > Mar 8 23:35:15 kooka last message repeated 3 times > Mar 8 23:35:23 kooka kernel: usb 1-1: USB disconnect, address 4 > Mar 8 23:35:23 kooka kernel: usb 1-1.3: USB disconnect, address 5 > Mar 8 23:35:32 kooka kernel: usb 1-1: new full speed USB device using = address 6 > Mar 8 23:35:32 kooka kernel: hub 1-1:1.0: USB hub found > Mar 8 23:35:32 kooka kernel: hub 1-1:1.0: 4 ports detected > Mar 8 23:35:37 kooka kernel: usb 1-1.3: new full speed USB device usin= g address 7 > Mar 8 23:35:37 kooka kernel: usb 1-1.3: control timeout on ep0in > Mar 8 23:35:37 kooka kernel: usb 1-1.3: control timeout on ep0in > Mar 9 00:35:29 kooka kernel: timeout: still 4 active urbs.. > Mar 9 00:35:29 kooka kernel: cannot submit datapipe for urb 1, err =3D= -22 > Mar 9 00:38:44 kooka kernel: timeout: still 1 active urbs.. > Mar 9 00:38:49 kooka kernel: usb 1-1.3: control timeout on ep0out > Mar 9 00:38:55 kooka kernel: usb 1-1.3: control timeout on ep0out > Mar 9 00:38:55 kooka kernel: 7:1:1: usb_set_interface failed > Mar 9 00:39:15 kooka kernel: usb 1-1.3: control timeout on ep0out > Mar 9 00:39:15 kooka kernel: 7:1:1: usb_set_interface failed > Mar 9 00:39:27 kooka kernel: usb 1-1.3: control timeout on ep0out > Mar 9 00:39:27 kooka kernel: 7:1:1: usb_set_interface failed > Mar 9 00:39:33 kooka kernel: usb 1-1.3: control timeout on ep0out > Mar 9 00:39:33 kooka kernel: 7:1:1: usb_set_interface failed > Mar 9 00:39:57 kooka kernel: usb 1-1: USB disconnect, address 6 > Mar 9 00:39:57 kooka kernel: usb 1-1.3: USB disconnect, address 7 > Mar 9 00:39:59 kooka kernel: Badness in ohci_endpoint_disable at drive= rs/usb/host/ohci-hcd.c:337 > Mar 9 00:39:59 kooka kernel: Call Trace: > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+8602995/14934089] = ohci_endpoint_disable+0xda/0x1b0 [ohci_hcd] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10912192/14934089]= hcd_endpoint_disable+0xf7/0x1e0 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10917353/14934089]= usb_disable_endpoint+0x70/0x80 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10917605/14934089]= usb_disable_device+0x8c/0xb0 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10896045/14934089]= usb_disconnect+0x94/0xf0 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10896113/14934089]= usb_disconnect+0xd8/0xf0 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10904138/14934089]= hub_port_connect_change+0x281/0x290 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10902508/14934089]= hub_port_status+0x43/0xb0 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10904864/14934089]= hub_events+0x2c7/0x340 [usbcore] > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10905038/14934089]= hub_thread+0x35/0x100 [usbcore] > Mar 9 00:39:59 kooka kernel: [ret_from_fork+6/20] ret_from_fork+0x6/0= x14 > Mar 9 00:39:59 kooka kernel: [default_wake_function+0/32] default_wak= e_function+0x0/0x20 > Mar 9 00:39:59 kooka kernel: [__crc_sigqueue_alloc+10904985/14934089]= hub_thread+0x0/0x100 [usbcore] > Mar 9 00:39:59 kooka kernel: [kernel_thread_helper+5/16] kernel_threa= d_helper+0x5/0x10 > Mar 9 00:39:59 kooka kernel:=20 > Mar 9 00:40:09 kooka kernel: 7:1:1: usb_set_interface failed > Mar 9 00:40:33 kooka last message repeated 43 times >=20 > I did a "/etc/init.d/alsa stop" which seemed to work ok (the modules > vanished) but a "/etc/init.d/alsa start" hung and: >=20 > Mar 9 00:47:14 kooka kernel: drivers/usb/core/usb.c: deregistering dri= ver snd-usb-audio > Mar 9 00:47:43 kooka kernel: Badness in ohci_endpoint_disable at drive= rs/usb/host/ohci-hcd.c:337 > Mar 9 00:47:43 kooka kernel: Call Trace: > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+8602995/14934089] = ohci_endpoint_disable+0xda/0x1b0 [ohci_hcd] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+10912192/14934089]= hcd_endpoint_disable+0xf7/0x1e0 [usbcore] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+10917353/14934089]= usb_disable_endpoint+0x70/0x80 [usbcore] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+10918277/14934089]= usb_reset_configuration+0x1c/0xe0 [usbcore] > Mar 9 00:47:43 kooka kernel: [sysfs_new_inode+94/176] sysfs_new_inode= +0x5e/0xb0 > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+11589914/14934089]= snd_usb_audio_probe+0x151/0x2b0 [snd_usb_audio] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+11590561/14934089]= usb_audio_probe+0x28/0x50 [snd_usb_audio] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+10892874/14934089]= usb_probe_interface+0x61/0x80 [usbcore] > Mar 9 00:47:43 kooka kernel: [bus_match+63/112] bus_match+0x3f/0x70 > Mar 9 00:47:43 kooka kernel: [driver_attach+92/160] driver_attach+0x5= c/0xa0 > Mar 9 00:47:43 kooka kernel: [bus_add_driver+147/176] bus_add_driver+= 0x93/0xb0 > Mar 9 00:47:43 kooka kernel: [driver_register+47/64] driver_register+= 0x2f/0x40 > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+10893095/14934089]= usb_register+0x3e/0xa0 [usbcore] > Mar 9 00:47:43 kooka kernel: [__crc_sigqueue_alloc+8971749/14934089] = snd_usb_audio_init+0x1c/0x33 [snd_usb_audio] > Mar 9 00:47:43 kooka kernel: [sys_init_module+281/560] sys_init_modul= e+0x119/0x230 > Mar 9 00:47:43 kooka kernel: [syscall_call+7/11] syscall_call+0x7/0xb > Mar 9 00:47:43 kooka kernel:=20 >=20 > I guess that it is time to reboot (again). >=20 > Stuart >=20 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id638&op=CCk > _______________________________________________ > Alsa-user mailing list > Als...@li... > https://lists.sourceforge.net/lists/listinfo/alsa-user >=20 --=20 William G. Unruh | Canadian Institute for| Tel: +1(604)822-3273 Physics&Astronomy | Advanced Research | Fax: +1(604)822-5324 UBC, Vancouver,BC | Program in Cosmology | un...@ph... Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/ |