Marko none - 2008-03-31

Hi there,

I have this card:

cat /proc/asound/cards
0 [I82801BAICH2   ]: ICH - Intel 82801BA-ICH2
                      Intel 82801BA-ICH2 with AD1885 at irq 5

with this configuration:

[code]root:~# cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Analog Devices AD1885

PCI Subsys Vendor: 0x0e11
PCI Subsys Device: 0x000f

Capabilities     : -headphone out-
DAC resolution   : 16-bit
ADC resolution   : 16-bit
3D enhancement   : Analog Devices Phat Stereo

Current setup
Mic gain         : +0dB [+0dB]
POP path         : post 3D
Sim. stereo      : off
3D enhancement   : off
Loudness         : off
Mono output      : MIX
Mic select       : Mic1
ADC/DAC loopback : off
Extended ID      : codec=0 rev=0 DSA=0 VRA
Extended status  : VRA
PCM front DAC    : 48000Hz
PCM ADC          : 48000Hz

AD18XX configuration
Unchained        : 0x1000,0x0000,0x0000
Chained          : 0x0000,0x0000,0x0000

and my problem is, that I can't here the output, if I am sending a
signal to the microphone input. I can here it just very very silent,
even if I setup every output volume to maximum.

I compiled the driver with the option --with-cards=intel8x0

Is there anything else I can do?

Thanks in advanced for any idea.



Code: code