From: Marc S. <ma...@au...> - 2001-04-13 16:23:52
|
From what I can tell from information provided by our product planners is Status: O that there are no models withdrawn which were supported by 4.3.3. There is a minimum memory and disk requirement. Here's the information provided to me by our planner - see section 3.5.1.1.1 for hardware requirements. 3.2.12 I/O SUPPORT ___________________ AIX 5.1 supports the following I/O with both the 64-bit and 32-bit kernel, unless otherwise indicated: STORAGE INTERFACES o 4.7 GB SCSI-2 DVD-RAM Drive including mksysb function o Gigabit Fibre Channel o External Fibre disk & tape subsystems (2104-E10/E20/F10/F20, 2102-F10/D00, 2103-H07, 2108-G07/R03, 2109-S08/S16, 3590 tape, etc.) o Ultra SCSI SE and Ultra SCSI Differential o SCSI Disk drives o External SCSI Disk subsystems (2104-DL1/TL1, 2104-E10/E20/F10/F20, 7134, 7137, 7135, 7131-105, 7027, 7203, 7204) o External Ultra3 subsystem (DU3/TU3) o External SCSI Tape and Optical subsystems (too numerous to list) o SCSI Tape Drives (1/4 inch, 4mm, 8mm, etc.) o SCSI CD-ROMs o Diskette Drive o PCI Dual Channel Ultra2 SCSI Adapter o PCI 3-Channel Ultra2 SCSI RAID Adapter o PCI 4-Channel Ultra3 SCSI RAID Adapter o Older Fast/Wide SCSI adapters (2408, 2409, 6208, 6209) o SCSI-2 Fast/Wide PCI RAID Adapter o SSA Advanced SerialRAID Adapter o SSA Advanced SerialRAID Plus Adapter o SSA Disk drives o Existing AIX Version 4.3.3 MCA adapters COMMUNICATIONS AND CONNECTIVITY (PCI BUS TYPE) o EIA RS232D/EIA RS422A o Token-Ring PCI 4/16 Adapter o 4-port 10/100 Mbps Ethernet o IBM Ethernet 10/100 Mbps o 10/100/1000 Base-T Ethernet PCI Adapter o Gigabit Ethernet o FDDI 100 Mbps (32-bit kernel only) o ATM 155 Mbps o Turboways 622 Mbps PCI MMF ATM Adapter o SP System Attachment o (deletion) o 2-port Multiprotocol PCI Adapter (32-bit kernel only when using X.25) o Artic960Hx 4-port Selectable PCI Adapter (32-bit kernel only) o Existing AIX Version 4.3.3 MCA adapters (except Artic960 adapters) o Digi 8/128 port Async Card IBM PCI 8/128 RAN boxes SPECIALIZED ADAPTERS o POWER GXT120P 2D PCI Graphics Accelerator o POWER GXT130P 2D PCI Graphics Accelerator o POWER GXT300P 2D PCI Graphics Accelerator o POWER GXT2000P Entry, 3D 32-bit PCI Graphics Accelerator o POWER GXT3000P Mid-range, 3D 64-bit PCI Graphics Accelerator o POWER GXT4000P Entry, 3D 64-Bit PCI Graphics Accelerator o POWER GXT6000P Mid-Range, 3D 64-Bit PCI Graphics Accelerator with onboard geometry engine o PCI Cryptographic Coprocessor (32-bit kernel only) 3.5.1 SPECIFIED OPERATING ENVIRONMENT ______________________________________ 3.5.1.1.1 HARDWARE REQUIREMENTS: IBM Power, POWER2, Personal Computer Power Series 830 and 850 desktop systems, IBM PowerPC systems, or POWER3 systems with the following exceptions: o RS/6000 7016 POWERserver Model 730 o RS/6000 7007 Notebook Workstation Model N40 o POWERnetwork Dataserver 7051 o RS/6000 7249 Models 851 and 860 o RS/6000 7247 Models 821, 822, and 823 AIX 5.1 supports system with at least 64 MB of physical memory, 128 MB of initial disk paging space, and requires 536 MB disk storage for the operating system for a total of 664 MB of disk storage. All POWER graphics adapters supported on AIX 4.3.3 will also be supported on the AIX 5.1 32-bit kernel. Additionally, the following POWER graphics adapters will be supported on both 32-bit and 64-bit kernels: o POWER GXT120P o POWER GXT130P o POWER GXT300P o POWER GXT2000P o POWER GXT3000P o POWER GXT4000P o POWER GXT6000P AIX 5.1 will NOT support the following hardware features: o 3Com 10/100 Mbps PCI Fast Etherlink XL for Power PC Systems (#2986) o Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter (#2708) AIX 5.1 does NOT support the following Graphic Input Devices in 64-bit kernel; the devices are supported under 32-bit kernel: o 6094-010 Dials o 6094-020 LPFK o 6093-011 Tablet o 6093-012 Tablet o 6093-021 Tablet > > Hi, > > My company is a Linux integrator, recently our client ask us to upgrade his > RS6000-AIX servers to Linux or others. I would appreciate if you could > provide me some information to which IBM RS6000 servers support the new > AIX-Linux and what recommendation that we should give the users if they have > a old RS6000 server. > > Thanks > > Edward Goh > Business Dev Manager > PDX eWorks Sdn Bhd > (Tel - 603-5708018 Fax - 603-5708019) > > > > _______________________________________________ > aixtoolbox-list mailing list > aix...@os... > http://oss.software.ibm.com/developerworks/opensource/mailman/listinfo/aixtoolbox-list > -- Marc Stephenson IBM Server Group - Austin, TX Internet: ma...@au... NOTES: ma...@us... Phone: 512-327-5670 T/L 678-3189 |