[Airo-linux-general] Trouble with Cisco Aironet Wireless 802.11b
Status: Inactive
Brought to you by:
breed
From: <bk...@el...> - 2006-02-07 09:50:08
|
I'm having some trouble getting this card (http://thinkwiki.org/wiki/Cisco_Aironet_Wireless_802.11b) to work with Debian on my ThinkPad R40. I have tested this with the latest version of the 2.6 kernel at this point, 2.6.15.3. It seems to find my card alright. # iwconfig eth0 no wireless extensions. lo no wireless extensions. eth1 IEEE 802.11-DS ESSID:""=20=20 Mode:Managed Frequency:2.417 GHz Access Point: FF:FF:FF:FF:FF:F= F=20=20=20 Bit Rate:11 Mb/s Tx-Power=3D20 dBm Sensitivity=3D0/65535=20=20 Retry limit:16 RTS thr:off Fragment thr:off Power Management:off Link Quality=3D100/100 Signal level=3D-10 dBm Noise level=3D-95= dBm Rx invalid nwid:1371 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:9459 Missed beacon:0 wifi0 IEEE 802.11-DS ESSID:""=20=20 Mode:Managed Frequency:2.417 GHz Access Point: FF:FF:FF:FF:FF:F= F=20=20=20 Bit Rate:11 Mb/s Tx-Power=3D20 dBm Sensitivity=3D0/65535=20=20 Retry limit:16 RTS thr:off Fragment thr:off Power Management:off Link Quality=3D100/100 Signal level=3D-10 dBm Noise level=3D-95= dBm Rx invalid nwid:1371 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:9459 Missed beacon:0 I can also find my router: # iwlist eth1 eth1 Scan completed : Cell 01 - Address: 00:15:F2:3D:68:22 ESSID:"dreaming" Mode:Master Frequency:2.412 GHz (Channel 1) Quality=3D100/100 Signal level=3D-34 dBm Noise level:= -95 dBm Encryption key:off Bit Rate:1 Mb/s Bit Rate:2 Mb/s Bit Rate:5.5 Mb/s Bit Rate:11 Mb/s Bit Rate:18 Mb/s Bit Rate:24 Mb/s Bit Rate:36 Mb/s Bit Rate:54 Mb/s Now, I think, is where it gets weird: # iwconfig eth1 mode managed essid dreaming key off # iwconfig eth1 eth1 IEEE 802.11-DS ESSID:""=20=20 Mode:Managed Frequency:2.417 GHz Access Point: FF:FF:FF:FF:FF:F= F=20=20=20 Bit Rate:11 Mb/s Tx-Power=3D20 dBm Sensitivity=3D0/65535=20=20 Retry limit:16 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=3D100/100 Signal level=3D-10 dBm Noise level=3D-96= dBm Rx invalid nwid:1381 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:12821 Missed beacon:0 It doesn't seem from iwconfig that the ESSID of the card is set. Now, the page on thinkwiki.org suggests that my firmware is a bit old, 5.41 according to /proc/driver/aironet/eth1/Status. Should I try to upgrade it? (That might be a bit tedious, since it seems to require Windows, which I have completely removed). Any other suggestions on what to try? Thanks in advance, Bj=C3=B6rn |