I'm seeing a problem where I can associate with
a Cisco AP, but not pass any traffic.
It seems to be a WEP problem, as the Stats on
the card show increasing counts in WEP-decrypt-errors.
We have double and tripled checked the WEP keys,
and they are the same on the AP and the client,
and in fact, it connects and passing traffic
with another AP using the same WEP key.
Any ideas? This happen to anyone else?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm having this same problem with a cisco 350 pcmcia card. It's got the 4.25.30 firmware, with the latest drivers from CVS. using pcmcia-cs-3.2.4 with wireless extensions v15
the invalid misc just keeps going up. I'm associated, but all dhcp requests fail. The WAP is using MAC filtering, but the MAC address is registered, and confirmed.. any ideas?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm seeing a problem where I can associate with
a Cisco AP, but not pass any traffic.
It seems to be a WEP problem, as the Stats on
the card show increasing counts in WEP-decrypt-errors.
We have double and tripled checked the WEP keys,
and they are the same on the AP and the client,
and in fact, it connects and passing traffic
with another AP using the same WEP key.
Any ideas? This happen to anyone else?
I'm having this same problem with a cisco 350 pcmcia card. It's got the 4.25.30 firmware, with the latest drivers from CVS. using pcmcia-cs-3.2.4 with wireless extensions v15
<snip>
eth1 IEEE 802.11-DS ESSID:"MySSID"
Mode:Managed Frequency:2.442GHz Access Point: 00:40:96:32:F0:98
Bit Rate:11Mb/s Tx-Power=20 dBm Sensitivity=0/65535
Retry limit:16 RTS thr:off Fragment thr:off
Encryption key:****-****-****-****-****-****-** Security mode:open
Power Management:off
Link Quality:16/10 Signal level:-41 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:236 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:4964 Missed beacon:0
</snip>
the invalid misc just keeps going up. I'm associated, but all dhcp requests fail. The WAP is using MAC filtering, but the MAC address is registered, and confirmed.. any ideas?