Hi. Recently I am using your software, I worked perfectly with an Allen -Bradley. Now I'm trying with MicroLogicx also Allen- Bradley . But I can not make a simple toggle with Basic buttom . Someone could give me some ideas why?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Without knowing all the details, I can not say why your setup does not work.
I assumed you downloaded all the Rockwell software and proved the
communication setup is working.
( BTW you can only use RSLink or Advanced HMI seperately. You need to stop
the RSLink to use Advanced HMI. )
I set up a MicroLogix 1000 example for digital and one for analog using
advanced hmi 3.98 on a Windows 7 system and Visual Basic 2015. Both work
fine for me.
Here is a link to my site where you can get a free download after logging
in. http://www.scada123.com/shop/index.php?main_page=index&cPath=65_67
( Archie, don't mean to toot my own horn, hope this is OK with you? )
Hi B W ... just now Im reading your link, but I have to tell you; I do a test closing mi RSLinks Classic and now I can see the data... I think that's the problem. But I want to finish to read your links to learn more about this fantastic PLC things... I really aprecia it your help...
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi. Recently I am using your software, I worked perfectly with an Allen -Bradley. Now I'm trying with MicroLogicx also Allen- Bradley . But I can not make a simple toggle with Basic buttom . Someone could give me some ideas why?
What version are you using? What address do you have in PLCAddressClick? Do you have OutputType set to Toggle?
Without knowing all the details, I can not say why your setup does not work.
I assumed you downloaded all the Rockwell software and proved the
communication setup is working.
( BTW you can only use RSLink or Advanced HMI seperately. You need to stop
the RSLink to use Advanced HMI. )
I set up a MicroLogix 1000 example for digital and one for analog using
advanced hmi 3.98 on a Windows 7 system and Visual Basic 2015. Both work
fine for me.
Here is a link to my site where you can get a free download after logging
in.
http://www.scada123.com/shop/index.php?main_page=index&cPath=65_67
( Archie, don't mean to toot my own horn, hope this is OK with you? )
On Mon, Feb 29, 2016 at 6:25 PM, Archie arj3090@users.sf.net wrote:
Hi B W ... just now Im reading your link, but I have to tell you; I do a test closing mi RSLinks Classic and now I can see the data... I think that's the problem. But I want to finish to read your links to learn more about this fantastic PLC things... I really aprecia it your help...